Burns Manufacturing

View as Grid List

Items 37-72 of 112

per page
Set Descending Direction
  1. C Shaped Offset Pull

    The C Shaped Offset Pull has 12 inch centers and has a 13 inches overall lenght. The clearance is 1-1/2 inches with a 2-1/2 inch projections. The handle is constructed on 1 inch diameter stock, the offset is 7 inches. The base is 7/8 inch round stock. The handle is furnished with thru bolts and finish washers.

    Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.

    G49D-
    As low as $265.36
  2. Decorative Cap-1 Inch Diameter

    The 1 inch diameter Decorative Cap comes in two different tread sizes 1/4-20 and 5/16-18.  The Cap measures 1 inch diameter by 3/8 inch thick. Stainless Steel base material.

    SF90-
    As low as $16.00
  3. Door Pull Offset 1.25 Diameter M39

    Solid offset door pull 1-1/4 inch diameter round stock.  Handle has a 4 inch offset with a 2 inch clearance and 3 1/4" projection. Available in 12 or 18 inch centers.

    Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.

    GHEM39-
    As low as $147.42
  4. Offset Pull Handles mounted Back to Back

    The Door Pull Offset #39 Handle is constructed of either solid aluminum, brass or stainless steel. The handle is 1" diameter tubing with a 2-3/4" offset and 2-3/4" projection. This is the most common type of handle you use today.  Just about every aluminum framed storefront door has a version of this handle. This handle is available in 8", 10", 12" and 18" centers on the mounting holes. The back to back mounting is for Metal or Wood Doors that are 1-3/4 thick. Included fastener is threaded into one of the handles, and the Stud End has fits into the inside handle and is held in place by a set screw on the handle.

    Package includes two offset pull handles and fastening hardware. Shown in Polished Stainless Steel with 12 inch centers.

    Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks.

    GHE39x39
    As low as $108.11
  5. Back to Back Offset Door Pull 1.25 inch

    Back to Back mounted Off-Set Door Pull featuring 1-1/4 inch stock diameter stock. Handle has a 4 inch offset with a 2 inch clearance and 3 1/4" projection. Available in 12 or 18 inch centers. Sold as sets, 2 handles and 3/8-24 thread stud.

    Back to Back fasteners are for a 1-3/4 inch thick door, if your door is a different thickness, please let us know in the comments.

    Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.

    GHEM39xM39
    As low as $282.15
  6. Push Plate 50

    Push Plate 50-Most Common

    .050" thick 4 bevel edge

    Finishes

    3 x 12" GPH312
    3.5 x 15" GPH315
    4 x 16" GPH416
    6 x 16" GPH616
    4 x 20" GPH420
    8 x 16" GPH816

    GPH50
    As low as $12.93
  7. Push Plate 70-1/8 Inch Thick

    Push Plate 70

    .125" thick with 4 beveled edges. Base material is either aluminum, brass, bronze or stainless steel depending on the finish. This would be considered a premium push plate.

    Finishes

    GPH70-
    As low as $19.66
  8. Automatic Floor Type Holder and Stop

    Automatic Floor Type Holder and Stop

    Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug.

    GJ534-
    As low as $59.57
  9. Dome Door Stop 1" Height 522

    Material: Forged Brass with Gray Rubber Bumper
    Size: 1-11/16" × 4" x 5/16" Base x 1" High
    Finishes: US26D-Brushed Chrome Finish Only
    Notes: Traditional slipper low dome design
    Standard Fasteners: Supplied with wood screws and machine screws with anchors
    GJ522
    $18.50
  10. Push Plate 60

    Push Plate 60

    8" x 16" x .050

    Finishes

    Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.

    GPH60-
    As low as $47.03
  11. Dome Door Stop 1-1/4" Height 523

    Material: Cast Brass with Gray Rubber Bumper
    Size: 2" × 4" x 1/2" Base x 1-1/4" High
    Finishes: US26D-brushed chrome finish only
    Notes: Traditional slipper high dome design
    Standard Fasteners: Supplied with wood screws and machine screws with anchors
    GJ523
    $26.13
  12. Push Plate 59

    Push Plate 59

    The push plate measures 7-1/2" wide x 15" tall x .050" thick. This plate is shipped with the mounting screws.

    Finishes

    Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.

    GPH59-
    As low as $43.89
  13. Dome Door Stop 1-5/8" Height 521

    Dome Door Stop 1-5/8" Height 521

    Forged brass construction with a gray rubber bumper. 1-3/4" diameter x 1-5/8" High x 1/4" Base thickness, US26D-Brushed Chrome finish only.
    Supplied with wood screws and machine screws with anchors

    GJ521
    $11.80
  14. Floor Mounted Door Holder/Stop 536

    Material: Cast Brass or Bronze with Black Bumper
    Size: 2-1/2" diameter Base x 3-7/8" High
    Finishes: US4 brushed brass
    US10B dark bronze
    US26 polished chrome
    US26D brushed chrome
    US3 polished brass
    ANSI: L01371
    Standard Fasteners: (1) lead anchor
    (2) #10 × 1" SMS
    (1) #10 × 1" SMS with plastic anchor
    (1) 5/16-18 × 2-1/2" stud
    (1) 5/16-18 × 2-1/2" hanger bolt
    GJ536-
    As low as $42.95
  15. Duranodic Aluminum (Dark Brown) Kick Plate

    Anodized Duranodic Aluminum Kick Plate 313AN
    Aluminum base material is then anodized to a dark brown duranodic finish
    Custom sizes are available, they run about $0.25 per square inch

    .040" thick
    Ships with matching phillips head sheet metal screws.

    Please allow 7-10 days for delivery

    GKP-xxxDB
    As low as $56.29
  16. Brushed Bronze Kick Plate

    Brushed Bronze Kick Plate US10 (Bronze), also know as 612
    Solid bronze plate with in a brushed finish, and is then clear coated.
    16 Ga (.050") Thick

    This finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color. Same appearance as Dull Bronze on finished color chart.

    Custom sizes available starting around $0.49 per square inch depending quantity

    Ships with a Phillips type sheet metal screws.

    Please allow 2 week shipping time

    GKP-US10
    As low as $84.24
  17. Lifetime Finish Satin Nickel Kick Plate

    Lifetime Satin Nickel PVD Kick Plate

    Satin Nickel Kick Plate US15-16 ga. (.050)

    These plates are made of solid brass or bronze alloy, and Nickel Plated and then Brushed.  Custom sizes available starting around $0.49 per square inch depending quantity.

    Kick Plate comes with screws for mounting

    Please allow 1 week shipping time

    GKP-SN
    As low as $107.64
  18. Oil Rubbed Bronze Kick Plate

    Oil Rubbed Bronze Kick Plate US10B (Dark Bronze)
    The Dark Bronze US10B Plates are Dark Bronze Powder Coat on a Brass Plate
    16 Ga (.050")
    Custom sizes available starting around $0.49 per square inch depending quantity

    Kick Plates come pre drilled with screws.

    Please allow 2 week shipping time

    GKP-DB
    As low as $87.62
  19. Floor Mounted Door Stop 524

    Material: Brass
    Size: 1-1/4" diameter x 1-1/2" High
    Finishes: US4 brushed brass
    US26D brushed chrome
    US10B dark bronze
    US3 polished Brass
    ANSI: L02131
    Notes: No exposed fasteners
    Standard Fasteners: (1) #12 × 1-1/2" SMS with plastic anchor
    (1) 12-24 × 1" MS
    (1) lead anchor
    GJ524-
    As low as $27.87
  20. Lifetime Brushed Brass Kick Plate

    Lifetime Brushed Brass Kick Plate US4 PVD -16 Ga (.050")
    Solid stainless steel plate with brushed brass finish, same appearance as the Dull Brass on Color Chart

    Custom sizes available starting around $0.41 per square inch depending quantity

    Ships with a Phillips type sheet metal screws

    Please allow 1 week shipping time

    GKP-BB
    As low as $83.16
  21. Floor Mounted Door Stop 535

    Floor Mounted Door Stop 535

    Cast Brass or Bronze construction
    2-1/2" diameter base x 3-1/8" high
    Fasteners included

    GJ535-
    As low as $29.72
  22. Stainless Steel Kick Plate Brushed 14 Gauge

    Stainless Steel Kick Plate Brushed 14 Gauge

    Brushed Stainless Steel Kick plate US32D 14 Ga (.062")
    Custom sizes available starting around $0.40 per square inch depending quantity
    Same appearance as brushed chrome

    Please allow 1 week shipping time

    Ships with a Phillips type sheet metal screws

    GKP-US32D-14ga
    As low as $69.88
  23. Lifetime Polished Brass Kick Plate

    Lifetime Polished Brass Kick Plate US3 PVD -16 Ga (.050")
    Stainless steel plate with a highly durable polished brass looking finish.

    Custom sizes available starting around $0.40 per square inch depending quantity

    Kick Plate comes with matching Phillips Head screws for mounting

    Please allow 1 week shipping time

    GKP-US3-PVD
    As low as $98.18
  24. Stainless Steel Kick Plate Brushed 18 Gauge

    Stainless Steel Kick Plate Brushed 18 Gauge

    Brushed Stainless Steel Kick Plate US32D18 Ga (.037") . This plate is ideal as a replacement for Brushed Chrome kick plates. Brushed Chrome Kick Plates are usually a bronze plate that is chrome plated. The problem with bronze is it is a soft metal and dents easily. The stainless steel plates are a lot harder and more resistant to dents. Brushed chrome looks identical to brushed stainless steel. Also known as Satin Stainless Steel.
    Custom sizes available starting around $0.22 per square inch depending quantity

    Please allow 1 week shipping time

    Kick Plates come pre drilled with screws

    GKP-ss-18ga
    As low as $37.64
  25. Stainless Steel Kick Plate Brushed 16 Gauge

    Stainless Steel Kick Plate Brushed 16 Gauge

    Brushed Stainless Steel Kick plate US32D 16 Ga (.050")
    Custom sizes available starting around $0.23 per square inch depending quantity

    Please allow 1 week shipping time

    Kick Plates come predrilled with screws.

    GKP-ss-16
    As low as $41.22
  26. Polished Brass Kick Plate

    Polished Brass Kick Plate

    Solid brass kick plate, polished to mirror finish.  We can no longer get the solid brass plates, the lifetime polished brass will be shipped in its place.

    Custom sizes available starting around $0.40 per square inch depending quantity

    Please allow 1 week shipping time

    Kick Plates come pre drilled with screws.

    I would highly recommend the Lifetime Brass if these plates are going to be mounted outside. Solid brass is soft, and tends to dent easily and the clear coat can be compromised. The Lifetime Brass plates do not require a clear and will last a lot, lot longer!

    GKP-polished-brass
    As low as $90.91
  27. Polished Stainless Steel Kick Plate US32

    Polished Stainless Steel Kick Plate US32

    Polished Stainless Steel US32 Kick Plate 16 Ga (.050"). These plates have the same appearance as polished chrome, but are a lot more durable. Custom sizes available starting around $0.37 per square inch depending quantity

    Please allow 1 week shipping time

    Kick Plates come pre drilled with screws.

    GKP-pol-ss
    As low as $60.93
  28. Floor Mounted Door Stop Heavy Duty 540

    Floor Mounted Door Stop Heavy Duty 540

    This Floor Mounted Door Stop is a personal favorite. It is extremely heavy duty, and is ideal for areas of high vandalism. Includes the 4-1/2" lag bolt & lag shield. The rubber base is 3" in diameter and is 2-5/8" high.  Uses a 3/4" diameter hole for the lag sheild.

    RB540
  29. Gold Aluminum Kick Plate

    Anodized Gold Aluminum Kick Plate
    Aluminum base material is then anodized to a polished brass finish. These plates are a great alternative to the Solid Polished Brass and Lifetime Brass kick plates. Custom sizes are available, they run about $0.24 per square inch or less.

    .040" thick
    Ships with matching Phillips type sheet metal screws

    Please allow 7-10 days for delivery

    GKP-Gold Aluminum
    As low as $52.13
  30. Aluminum Diamond .125 Plate Kick Plate

    Aluminum Diamond Plate Kick Plate

    Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
    Custom sizes are available, they run about $0.39 per square inch

    .125" thick

    Please allow 7-10 days for delivery

    GKP-DP
    As low as $100.51
View as Grid List

Items 37-72 of 112

per page
Set Descending Direction