Bathroom| Mills Toilet Partition

Selling commercial bathroom partitions to the public, private businesses, builders, contractors, government, local, state, churches, YMCA, schools, local shop owners and more everyday. We are proud to work with some of the best bathroom partition manufactures in the USA. Global partitions are based in Georgia and provide some of the fastest delivered toilet partitions in the country with offering five materials that ship in forty eight hours and has a one to four day travel time. American specialties restroom accessories are a great match to complete your bathrooms. The ASI group owns ASI locker, American specialties, Global Partitions and Accurate partitions. Hadrian Partitions is located in Ohio and Arizona offer three toilet partition material types that also ship quick and can delivery to the west coast in four to five business days including travel time. This helps our west coast customers receive fast delivered partitions.


Global Partitions and Accessories

You will find everything from complete commercial restroom partition toilet stall systems or just door's, panel's, pilasters and privacy screens on our website. Accessories from Hand Dryers, Toilet Paper Holders, Paper Towel Dispensers, Fem nap Disposal units, foaming soap dispenser and more. Partition hardware is separated by manufacture for Door hardware, this is very important to know your manufacture of your partitions. All generic parts for the manufactures are typically brackets, door pulls, coat hooks, slide latches, keepers and more on our website. Bathroom partitions are not returnable, every order is made per customer. For quotes on complete toilet Partitions please send drawings to sales@robertbrooke.com.

RBA Partitions and Parts Catalog

Filter
View as Grid List

14 Items

per page
Set Descending Direction
  1. Mills Top Bottom Hinge Set

    chrome plated top and bottom hinge set for 1-1/4" round edge pilaster, includes everything you see in the picture. known as hdwt-z01 through Mills Partitions.
    90T100-90T110
    $92.00
  2. Mills Slide Bolt Latch Concealed

    Mills Partitions ADA Concealed Slide Bolt Latch Concealed Chrome Plated

    Covers are polished chrome plated. Latch cover plates are 1-3/4" wide by 1-3/8" high. The latch switch is 1-15/32" wide. The latch bolt is 3/8" diameter. The spacing between the cover and the latch 1-1-32". This is a one of a kind latch. Also known as a Bathroom Stall Concealed Latch. Manufacture part # 4230, HDWT T290.

    90T290
    $18.98
  3. Mills Keeper Bumper Surface Mount

    Mills Keeper Bumper 1-5/8" Between Screws, Surface Mount For Round Edge Posts

    Polished chrome plated Zamac die casting. The strike and keeper measure 2-1/4" high by 29/32" wide and 15/16" deep. The hole spacing is 1-5/8" on center. Also known on Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5550.

    Shipped with mounting screws.

    90T316
    $13.56
  4. Coat Hook & Bumper 3-1/2" Projection x 2-3/4" High

    Coat Hook & Bumper 3-1/2" Projection x 2-3/4" High Chrome Plated

    Chrome plated Zamac construction. Coat hook base is 1-1/2" wide by 2-3/4" high, with screw spacing of 7/8" at the top. Hook projects out 1". Bumper projects out 3-1/2" with a rubber insert. Also known as a Bathroom Stall Coat Hook and Bumper. Manufacture part # 4260.

    Same as 9OT285, 9HA426

    9G0160
    $4.62
  5. Chrome Plated Keeper Bumper Inswing Flat Stop

    Chrome Plated Toilet Partition Keeper Bumper Inswing Flat Stop

    Chrome plated Zamac die casting. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5140

    Shipped with mounting screws.

    90T116
    $7.00
  6. Slide Bolt Latch 3/8" Bar To Door Clearance

    Surface Mounted Slide Bolt Latch 3/8" Bar To Door Clearance

    Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/4" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 3/8" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch and Toilet Partition Locks. Manufacture part # 5030.

    Shipped with mounting screws.

    90T160
    $8.60
  7. Cast SS Slide Bolt Latch, Hole Spacing 1-3/4"X1-1/2"

    Partition Slide Latch, Cast Stainless Steel With Hole Spacing 1-3/4" X 1-1/2"

    Cast stainless steel construction. The latch base is 2-31/32" wide by 1-15/16" high and projects 1-1/8" high. The hole spacing is 1-3/4" wide by 1-1/2" high. The four mounting holes have a diameter of 1/4". The Slide Latch base is 1/4" thick. The latch bolt is 7/8" wide by 3-7/16" long. This toilet stall latch is used on Accurate and Mills Partitions. Also known as a Bathroom Stall Slide Latch. Manufacture part # 6983.

    Shipped with mounting screws.

     

    9A6983
    $24.04
  8. Mills Keeper Bumper Concealed

    Mills Toilet Partition Keeper Bumper For Concealed Latches 1-1/4" Round Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5590.

    Shipped with mounting screws.

    90T317
    $6.33
  9. Mills Keeper Bumper Inswing 1-1/4" Sq Edge

    Mills Toilet Partitions Keeper Bumper For 1-1/4" Inswing Square Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110

    Shipped with mounting screws.

    90T120
    $8.50
  10. Mills Door Cam

    Selling Mills Door Cam for over 35 years. Your One Stop shop for all Bathroom Hardware and Partitions.
    90T117
    $3.16
View as Grid List

14 Items

per page
Set Descending Direction