Keepers and Stops
Bathroom Partition Keeper Bumpers and Stops
All keeper bumpers and stops are in stock for fast delivery. We carry in stock chrome plated, cast stainless steel and aluminum partition keeper bumpers. Replacing old hardware with new will change your bathroom's to looking new again. All partition keeper bumpers will come with security screws. All throw latch keepers are required for all handicap doors over 32", 34", 36" width for easy access to the inside door.
-
Bobrick Keeper Bumper Inswing
Bobrick Toilet Partition Keeper Bumper For 1" Inswing Square Edge Post
Polished chrome plate Zamac die casting construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. The slot is 5/16" deep by 1-1/2" high. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing 1". Manufacture part # 5620.
Shipped with mounting screws.
9A5620 -
Bobrick Keeper Bumper For 1" Outswing Sq Edge
Bobrick Toilet Partition Keeper Bumper For 1" Outswing Square Edge Post
Polished chrome plate Zamac die casting construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5720.
Shipped with mounting screws.
9A5720 -
Bobrick Inswing Keeper Bumper For Throw Latch For 1" Sq Edge
Bobrick Toilet Partitions Inswing Keeper Bumper For Throw Latch For 1" Sq Edge Post
Polished chrome plated Zamac construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5820.
Shipped with mounting screws.
9A5820 -
Comtec In Swing Flat Stop 6"
Comtec Toilet Partitions In Swing Flat Stop 6"
Clear anodized aluminum construction. The strike and keeper is 6" tall by 2-9/16" deep and 3/4" thick on the stop. The material is 1/8" thick. The mounting holes are 3" on center. And the locking slot is 1-1/2" high by 3/8" deep. Also known as a Bathroom Stall Strike and Keeper-In Swing Flat. Manufacture part # 5798.
Shipped with mounting screws.
Aluminum 6" in swing flat stop keeper, for wall mount. 57989A5798 -
Comtec Outswing Flat Stop 6"
Comtec Out Swing Flat Stop 6"
Clear Anodized aluminum construction. The strike and keeper is 6" tall by 1-5/8" deep by 1/8" thick. The stop is 9/16" deep by 3/4" wide with a rubber insert. The mounting holes are 3" on center. Also known as a Bathroom Stall Flat Backed for Wall Mounting Strike and Keeper. Manufacture part #5898.
Shipped with mounting screws.
9A5898 -
Comtec Aluminum 6" Inswing Strike And Keeper For 1" Post
Comtec Toilet Partition Aluminum 6" Inswing Strike And Keeper For 1" Post Or Pilaster
Clear Anodized aluminum construction. Strike and Keeper is 6" high by 1-15/16" wide. The three mounting screws are 2" on center apart. The slot is 3/8" deep by 1-1/2" high. Also known as a Bathroom Stall Strike and Keeper Inswing 1". Used mostly on Solid Plastic (HDPE) Toilet Parttions. Some manufacture part #'s are 5778, HSISA, and 650-2873.
Shipped with mounting screws.
9HSISA -
Mills Keeper Bumper Surface Mount
Mills Keeper Bumper 1-5/8" Between Screws, Surface Mount For Round Edge Posts
Polished chrome plated Zamac die casting. The strike and keeper measure 2-1/4" high by 29/32" wide and 15/16" deep. The hole spacing is 1-5/8" on center. Also known on Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5550.
Shipped with mounting screws.
90T316 -
Comtec Aluminum 6" Outswing Keeper Bumper For 1"
Comtec Toilet Partition Aluminum 6" Outswing Strike And Keeper For 1" Post Or Pilaster
Clear Anodized aluminum construction. Strike and Keeper is 6" high by 1-15/16" wide. The three mounting screws are 2" on center apart. Also known as a Bathroom Stall Strike and Keeper outswing1". Used mostly on Solid Plastic (HDPE) Toilet Parttions. Known as 5878.
Shipped with mounting screws.
9HSOSA -
Cast SS Inswing Surface Keeper 1-1/2" Screws
Partition Inswing Surface Keeper 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The keeper base is 2-1/2" tall by 1-3/32" wide. The latch face measures 2-1/2" tall with a 7/8" projection. The hole spacing is 1-1/2". The slot measures 5/16" by 1-9/16". Also known as a Bathroom Stall Keeper-Inswing Flat. Manufacture part # 5163.
Shipped with mounting screws.
9A5163 -
Cast SS Keeper Bumper For 1" Sq Post Outswing
Partition Keeper Bumper For 1" Square Post Outswing Cast Stainless Steel
Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5723.
Shipped with mounting screws.
9A5723 -
Cast SS Keeper Bumper For 1-1/4" Sq Post Outswing
Partition Keeper Bumper For 1-1/4" Square Post Outswing Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5213.
Shipped with mounting screws.
9A5213 -
Cast SS Keeper Bumper Inswing 1" Sq Edge
Partition Keeper Bumper Inswing 1" Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5823.
Shipped with mounting screws.
9A5823 -
Cast SS Keeper Bumper Inswing 1-1/2" Screws
Partition Keeper Bumper Inswing 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5143.
Shipped with mounting screws.
9A5143 -
Chrome Plated Bumper Keeper 1-1/4" Round Edge
Chrome Plated Toilet Partitions Bumper Keeper For 1-1/4" Round Edge
Polished chrome plated Zamac construction. The strike and keeper measures 2-1/2" tall by 1-7/8" wide. The mounting holes are 1-1/2" on center. The stop measures 3/4" wide by 17/32" deep with a rubber insert bumper. Slot is 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5430.
Shipped with mounting screws.
9A5430 -
Cast SS Keeper Bumper Inswing 1-1/4" Post Sq Edge
Partition Keeper Bumper Inswing 1-1/4" Post Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5113.
Shipped with mounting screws.
9A5113 -
Cast SS Keeper Bumper Outswing 1-1/2" Screws
Partition Keeper Bumper Outswing 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-5/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5263.
Shipped with mounting screws.
9A5263 -
Cast SS Keeper Flat Stop 1-1/2" Screws
Partition Keeper Flat Stop 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-1/2" on center. Slots are 1/4" deep by 13/16" high. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5283.
Shipped with mounting screws.
9A5283 -
Chrome Plated Keeper Bumper Flat Stop Outswing
Chrome Plated Partition Keeper Bumper Flat Stop Outswing Door
Chrome plated Zamac die casting. The strike and keeper is 1-1/4" high by 1-3/4" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5640.
Shipped with mounting screws.
9A5640 -
Cast Stainless Steel Door Stop
Cast Stainless Steel Partition Door Stop
Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5173.
Shipped with mounting screws.
9A5173 -
Cast Stainless Steel Inswing Keeper
Cast Stainless Steel Partition Keeper 1-1/2" Between Screws
Cast stainless steel construction. Keeper base is 2-1/2" high by 1-3/16" wide with a 1-1/2" hole spacing. Strike is 2-1/2" tall by 7/8" deep. The material 1/8" thick. The slot is 13/16" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5183.
Shipped with mounting screws.
9A5183 -
Chrome Plated Bumper Keeper 1" Sq Edge
Chrome Plated Toilet Partition Bumper Keeper For 1" Square Edge Post
Polished chrome plated Zamac construction. The strike and keeper measures 2-1/2" tall by 1-15/16" wide by 1-17/32 deep. The mounting holes are 1-1/2" on center. The stop measures 7/8" wide by 17/32" deep with a rubber insert bumper. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1". Manufacture part # 5730.
Shipped with mounting screws.
9A5730 -
Concealed Latch Cast SS Keeper Bumper 1-1/4 inch Post Round Edge
Concealed Partition Latch Keeper Bumper 1-1/4" Post Round Edge Cast Stainless Steel
Cast stainless steel construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5513.
Shipped with mounting screws.
7/16" X 3/4" SLOT
9A5513 -
Keeper Bumper For Throw Latch Inswing Flat Stop
Chrome Plated Partition Keeper Bumper For Throw Latch Inswing Flat Stop
Chrome plated Zamac die casting. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-1/2" on center. Slots are 1/4" deep by 13/16" high. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5280
Shipped with mounting screws.
9A5985 -
Concealed Latch Cast SS Keeper Bumper For 1-1/2" screws
Concealed Partition Latch Keeper Bumper For 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-13/16" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. The slot is for the concealed latch is 7/8" high by 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5243
Shipped with mounting screws.
9A5243 -
Keeper Bumper For Throw Latch, For Inswing Flat Stop
Chrome Plated Partition Keeper Bumper For Throw Latch, For Inswing Flat Stop
Chrome plated Zamac die casting. The strike and keeper is 1-1/4" high by 2-1/2" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. The slots are 1/4" deep. Also known as a Bathroom Stall Strike and Keeper Inswing Flat. Manufacture part # 5650.
Shipped with mounting screws.
9A5990 -
Concealed Latch Cast SS Keeper Bumper Inswing 1-1/4"
Concealed Partition Latch Keeper Bumper Inswing 1-1/4" Round Edge Cast Stainless Steel
Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 1/4" deep. The opening to mount it on the round edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5583.
Shipped with screws for mounting.
9A5583 -
Concealed Latch Cast SS Keeper Bumper Inswing 1-1/4"
Concealed Latch Keeper Bumper Inswing For 1-1/4" Square Edge Post Cast Stainless Steel
Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5983
Shipped with screws for mounting.
9A5983 -
Concealed Latch Cast SS Keeper Bumper Outswing 1-1/4" Round Edge
Concealed Partition Latch Keeper Bumper Outswing 1-1/4" Round Edge Cast Stainless Steel
Cast stainless Steel Construction. The outside dimensions are 2-3/8" wide by 1-1/4" high by 1-3/4" deep. Stop projects out 1-1/8" by 1/2" thick with a rubber insert. Designed for an 1-1/4" thick post round edge. Also known as a Bathroom Stall Strike and Keeper Outswing 1-1/4". Manufacture part # 5573.
Shipped with mounting screws.
9A5573 -
Concealed Latch Cast SS Keeper Bumper Outswing 1-1/4"
Concealed Partition Latch Keeper Bumper Outswing 1-1/4" Square Edge Cast Stainless Steel
Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-13/16" deep. The strike is 1/2" thick with rubber insert. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5973.
Shipped with screws for mounting.
9A5973