Stainless Steel
Cast Stainless Steel Bathroom Partition Keepers and Stops
All keeper bumpers and stops are in stock for fast delivery. Replacing old hardware with new will change your bathroom's to looking new again. All Partition keeper bumpers will come with security screws. All throw latch keepers are required for all handicap doors over 32", 34", 36" width for easy access to the inside door.
RBA Partitions and Parts Catalog
-
Cast SS Inswing Surface Keeper 1-1/2" Screws
Partition Inswing Surface Keeper 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The keeper base is 2-1/2" tall by 1-3/32" wide. The latch face measures 2-1/2" tall with a 7/8" projection. The hole spacing is 1-1/2". The slot measures 5/16" by 1-9/16". Also known as a Bathroom Stall Keeper-Inswing Flat. Manufacture part # 5163.
Shipped with mounting screws.
9A5163 -
Cast SS Keeper Bumper For 1" Sq Post Outswing
Partition Keeper Bumper For 1" Square Post Outswing Cast Stainless Steel
Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5723.
Shipped with mounting screws.
9A5723 -
Cast SS Keeper Bumper For 1-1/4" Sq Post Outswing
Partition Keeper Bumper For 1-1/4" Square Post Outswing Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5213.
Shipped with mounting screws.
9A5213 -
Cast SS Keeper Bumper Inswing 1" Sq Edge
Partition Keeper Bumper Inswing 1" Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5823.
Shipped with mounting screws.
9A5823 -
Cast SS Keeper Bumper Inswing 1-1/2" Screws
Partition Keeper Bumper Inswing 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5143.
Shipped with mounting screws.
9A5143 -
Cast SS Keeper Bumper Inswing 1-1/4" Post Sq Edge
Partition Keeper Bumper Inswing 1-1/4" Post Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5113.
Shipped with mounting screws.
9A5113 -
Cast SS Keeper Bumper Outswing 1-1/2" Screws
Partition Keeper Bumper Outswing 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-5/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5263.
Shipped with mounting screws.
9A5263 -
Cast SS Keeper Flat Stop 1-1/2" Screws
Partition Keeper Flat Stop 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-1/2" on center. Slots are 1/4" deep by 13/16" high. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5283.
Shipped with mounting screws.
9A5283 -
Cast Stainless Steel Door Stop
Cast Stainless Steel Partition Door Stop
Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5173.
Shipped with mounting screws.
9A5173 -
Cast Stainless Steel Inswing Keeper
Cast Stainless Steel Partition Keeper 1-1/2" Between Screws
Cast stainless steel construction. Keeper base is 2-1/2" high by 1-3/16" wide with a 1-1/2" hole spacing. Strike is 2-1/2" tall by 7/8" deep. The material 1/8" thick. The slot is 13/16" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5183.
Shipped with mounting screws.
9A5183 -
Concealed Latch Cast SS Keeper Bumper 1-1/4 inch Post Round Edge
Concealed Partition Latch Keeper Bumper 1-1/4" Post Round Edge Cast Stainless Steel
Cast stainless steel construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5513.
Shipped with mounting screws.
7/16" X 3/4" SLOT
9A5513 -
Concealed Latch Cast SS Keeper Bumper For 1-1/2" screws
Concealed Partition Latch Keeper Bumper For 1-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-13/16" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. The slot is for the concealed latch is 7/8" high by 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5243
Shipped with mounting screws.
9A5243 -
Concealed Latch Cast SS Keeper Bumper Inswing 1-1/4"
Concealed Partition Latch Keeper Bumper Inswing 1-1/4" Round Edge Cast Stainless Steel
Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 1/4" deep. The opening to mount it on the round edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5583.
Shipped with screws for mounting.
9A5583 -
Concealed Latch Cast SS Keeper Bumper Inswing 1-1/4"
Concealed Latch Keeper Bumper Inswing For 1-1/4" Square Edge Post Cast Stainless Steel
Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5983
Shipped with screws for mounting.
9A5983 -
Concealed Latch Cast SS Keeper Bumper Outswing 1-1/4" Round Edge
Concealed Partition Latch Keeper Bumper Outswing 1-1/4" Round Edge Cast Stainless Steel
Cast stainless Steel Construction. The outside dimensions are 2-3/8" wide by 1-1/4" high by 1-3/4" deep. Stop projects out 1-1/8" by 1/2" thick with a rubber insert. Designed for an 1-1/4" thick post round edge. Also known as a Bathroom Stall Strike and Keeper Outswing 1-1/4". Manufacture part # 5573.
Shipped with mounting screws.
9A5573 -
Concealed Latch Cast SS Keeper Bumper Outswing 1-1/4"
Concealed Partition Latch Keeper Bumper Outswing 1-1/4" Square Edge Cast Stainless Steel
Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-13/16" deep. The strike is 1/2" thick with rubber insert. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5973.
Shipped with screws for mounting.
9A5973 -
Stamped SS Keeper Bumper In swing 1-7/8 & Screws
Toilet Partition Keeper Bumper Inswing With 1-7/8" Between Screws
Stainless steel construction, 14 gauge (.075" thick). Plate measures 2-7/8" high x 1-7/8" wide including lugs. Lugs are 7/8" high and 9/16" thick. Screw holes are 1/4" diameter. Sometimes called Bathroom Stall Strike and Keeper-Inswing/Outswing Flat. Manufacuture part # 6329 and 650-8226.
Screws are included with this keeper.
9A7057 -
Stamped SS Keeper For 1" Door, 1-7/8" Between Screws
Partition Strike And Keeper For 1" Door, 1-7/8" Between Screws, Stamped Stainless Steel
Stamped stainless steel .075" thick construction. The strike and keeper measure 2-7/8" high by 2" wide with a 1-7/8" hole spacing. The stop posts are 5/8" wide by 7/8" tall with rubber inserts. For use with 1" square edge posts. Also known as a Bathroom Stall Strike and Keeper Outswing 1". Manufacture part # 6459.
Shipped with mounting screws.
9A6459