Search results for: 'case latch than tall acrylic slide top'
-
RCM525 Pressure Sensitive Adhesive
Excelsior PS-525 Modified Pressure Sensitive adhesive is an acrylic adhesive that can be used as a wet-set, tacky-wet, or dry-set pressure sensitive adhesive for the permanent installation of dimensionally stable Resilient flooring products over porous and non-porous substrates in indoor applications; it is a low odor, non-flammable, solvent-free and ready to use product. We are recommending the 1/16” X 1/16” X 1/16” square notch trowel which yields 150 square foot/gallon coverage; the resulting installation will end up with a non-releasable firm-set adhesive bond.
Access Times:
Heat Welding ≥ 24 Hours
Light Foot Traffic ≥ 24 Hours
Heavy Foot Traffic and Rolling Loads ≥ 48 Hours
Maintenance ≥ 72 Hours1 Gallon covers approximately 150 square feet.
RCM525- -
Road Roller Matting
VINYL BACK COCOA MAT ROAD ROLLERS
Road roller mats are made with fibers from the almost indestructible outer husk of the coconut. These fibers are bonded into a vinyl backing. These vinyl back Road Roller Mats can be installed much easier than woven mats and can be easily cut to fit without the mat unraveling. If small holes are needed for installation, a sharp knife or punch will easily do the job.
Rollers are 32' 9" long and around 1-3/16" thick
RRXR -
320 Carpet Tile Adhesive
320 CARPET TILE ADHESVIE
A special latex emulsion pressure sensitive adhesive formulated for installation of modular carpet tiles or carpet matting. Adhesive is non-flammable, water resistant and has excellent resistance to vinyl plasticizer migration. Adhesive remains tacky for an extended period - allows tile to be picked up and replaced without affecting adhesive. Remove tiles from floor more easily than with conventional adhesives, simplifying reinstallation of tile sections or a complete area.
Covers 200 to 300 square feet per gallon
Sold in 1 or 4 Gallon Pails320ADH -
Specta Deluxe Olefin Carpet Mats
Plush and durable, this olefin cut pile carpet mat helps wipe shoes clean at the entryway. Reap benefits from the many features of this long wearing carpet mat; save money on maintenance costs. Solution-dyed olefin yarn preserves the attractive color appearance.
- 17 oz. of 100% continuous filament olefin yarn per square yard fused to a 65 mil durable solid vinyl back.
- Provides superior wiper service, ultimate floor protection, reduces maintenance.
- Traps over one gallon of water per square yard; dries faster than conventional carpet mats to lessen slippery hazard.
- Repels stains to maintain mat’s original beauty; clean with vacuum, hose or broom.
- Made in the U.S.A.
- SPECTRA-DELUXE MATS—approx. 1" vinyl border on all four sides.
SDxxx- -
Koroseal Vinyl Carpet Nosing No. 140
Improve safety and prevent worn carpet edges on steps; for new or renovation work. Butt 1/4” to 3/8” thick carpet against both the top and bottom lips of butt-type carpet nosing. Standard 8’ lengths; easily cut to size. Install with #400 Neoprene Contact Cement or #300 Water-based Contact Adhesive.
SPECIFICATIONS:
Furnish and install No.140 Koroseal Vinyl Ribbed Carpet Nosing; 3-1/8” deep; 2-1/2” nose depth; square adjusta-nose. Lap 5/16”, 1/4" or 3/8” carpet over lip on both the step and riser. Select from standard colors of black, brown.
Shipping: Due to shipping costs, this product is shipped in two 48" sections140 -
Corner Guard CG-10 3" x 3"
Corner Guard CG-10 3" x 3"
90 degree 3” x 3” vinyl corner guard with aluminum retainer. Vinyl flex action absorbs impact, and is .100” thick, the aluminum retainer is .062 thick. Available in 4, 8 and 9 foot lengths. Top and bottom end caps included with the corner guard.
CG-10- -
Corner Guard CG-20 2" x 2"
Corner Guard CG-20 2" x 2"
90 degree 2” x 2” vinyl corner guard with aluminum retainer. Vinyl flex action absorbs impact, and is .085” thick, the aluminum retainer is .062 thick. Each corner guard includes the end caps. Available in 4, 8 and 9 foot lengths. Corner guards are shipped with a top and bottom end cap.
CG-20- -
Aluminum Nosing 2 inch with Grit Surface
This 2-1/2" deep nosing is made from the same material as our Grit-Surface Aluminum Treads. The front edge is 1-3/4" deep (inside nose dimension is 1-1/4"). The nose has a 1-3/4" wide abrasive finish with a 3/4" tapered aluminum back edge. Both the nose and tapered edge have a 1/4" wide reflective yellow safety tape strip for additional safety. The nosing is available in abrasive colors of Black, Brown, Blue, Gray, Green, Red or Yellow. Nosing is available solid (for glue-down applications) or with countersunk holes (for screw-down applications) every 12". Nose drops 1-1/16".
SPECIFICATIONS:
Furnish and install Musson Grit-Surface Aluminum Nosings, 3/16" thick X 2-1/2" deep; cut lengths up to 10 foot long. Tread surface shall have aluminum oxide abrasives permanently bonded to a heat treated aluminum nosing with 1/4" wide reflective yellow safety strip on both the top surface (between the grit surface and aluminum) and the nose. Grit surface shall be in one of the following standard colors: Black, Brown, Blue, Gray, Green, Red or Yellow. Nosings can be supplied with two countersunk holes every 12" for screw down installation or without holes for installation with our #400 Neoprene Contact Cement.
Custom sizes are available up to 10' long
GSA2N-
