Search results for: 'clock latch that tube acrylic singl'
-
RCM525 Pressure Sensitive Adhesive
Excelsior PS-525 Modified Pressure Sensitive adhesive is an acrylic adhesive that can be used as a wet-set, tacky-wet, or dry-set pressure sensitive adhesive for the permanent installation of dimensionally stable Resilient flooring products over porous and non-porous substrates in indoor applications; it is a low odor, non-flammable, solvent-free and ready to use product. We are recommending the 1/16” X 1/16” X 1/16” square notch trowel which yields 150 square foot/gallon coverage; the resulting installation will end up with a non-releasable firm-set adhesive bond.
Access Times:
Heat Welding ≥ 24 Hours
Light Foot Traffic ≥ 24 Hours
Heavy Foot Traffic and Rolling Loads ≥ 48 Hours
Maintenance ≥ 72 Hours1 Gallon covers approximately 150 square feet.
RCM525- -
GSA3 Grit Strip Adhesive
Use adhesive where Grit Strip is applied to porous surfaces such as wood or concrete. Grit Strip adhesive is recommended as a sealer; will give a better, longer lasting bond. Recommended application temperature is 60 degrees and above. One quart covers approximately 50 square feet (single coat) of Grit Strip; available in quart and pint units.
GSA3 -
Easy Sweep Rib Runner Mat
Non-fading superior aging properties make this oil, grease, chemical and stain resistant matting a popular item. Non-combustible; tear, cut, impact and ozone resistant; high tensile strength and elongation properties; single piece rolls. Use inside or outside. Round ribbed corrugations run lengthwise, easily cleaned with soap and water.
GREASE AND OIL RESISTANT — NO FABRIC
Pricing below is per linear feet, Black Only, Size is the Width
MXXX
