Search results for: 'royal 70 10 hini'
-
Corner Guard CG-10 3" x 3"
Corner Guard CG-10 3" x 3"
90 degree 3” x 3” vinyl corner guard with aluminum retainer. Vinyl flex action absorbs impact, and is .100” thick, the aluminum retainer is .062 thick. Available in 4, 8 and 9 foot lengths. Top and bottom end caps included with the corner guard.
CG-10- -
Road Roller Matting
VINYL BACK COCOA MAT ROAD ROLLERS
Road roller mats are made with fibers from the almost indestructible outer husk of the coconut. These fibers are bonded into a vinyl backing. These vinyl back Road Roller Mats can be installed much easier than woven mats and can be easily cut to fit without the mat unraveling. If small holes are needed for installation, a sharp knife or punch will easily do the job.
Rollers are 32' 9" long and around 1-3/16" thick
RRXR -
334 Vinyl Stair Tread 24" Brown
334 Vinyl Stair Tread 24" Brown
Lightweight, economy gauge with a round rib design. Wear and tear resistant Vinyl Stair Treads will give years of service; compares with heavier weight treads. Curve-around nose fits round or square nose steps. Intended for residential or light commercial use.
SPECIFICATIONS:
#334 Koroseal Vinyl economy stair treads, round rib surface design, approximately 5/64" thick, 10" deep with curve-around nose;
334BRN24SP -
334 Vinyl Stair Treads
Ideal for residential and light commercial applications. This is one of our favorite stair treads for the do-it-yourselfers. Easy to install with very easy cutting, ideal for basement steps. Lightweight, economy gauge with a round rib design. Curve-around nose fits round or square nose steps. Made in the USA.
Specifications:
- #334 Koroseal Vinyl economy stair treads
- Round rib surface design
- Thickness: 5/64"
- Depth: 10"
- Curve-around nose
- Sizes available: 18", 24", 36", 48" or 72"
- Colors available: Brown, Black
VST334 -
Aluminum Nosing 2 inch with Grit Surface
This 2-1/2" deep nosing is made from the same material as our Grit-Surface Aluminum Treads. The front edge is 1-3/4" deep (inside nose dimension is 1-1/4"). The nose has a 1-3/4" wide abrasive finish with a 3/4" tapered aluminum back edge. Both the nose and tapered edge have a 1/4" wide reflective yellow safety tape strip for additional safety. The nosing is available in abrasive colors of Black, Brown, Blue, Gray, Green, Red or Yellow. Nosing is available solid (for glue-down applications) or with countersunk holes (for screw-down applications) every 12". Nose drops 1-1/16".
SPECIFICATIONS:
Furnish and install Musson Grit-Surface Aluminum Nosings, 3/16" thick X 2-1/2" deep; cut lengths up to 10 foot long. Tread surface shall have aluminum oxide abrasives permanently bonded to a heat treated aluminum nosing with 1/4" wide reflective yellow safety strip on both the top surface (between the grit surface and aluminum) and the nose. Grit surface shall be in one of the following standard colors: Black, Brown, Blue, Gray, Green, Red or Yellow. Nosings can be supplied with two countersunk holes every 12" for screw down installation or without holes for installation with our #400 Neoprene Contact Cement.
Custom sizes are available up to 10' long
GSA2N- -
GSA9 Aluminum Stair Treads
Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".
Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.
Purchase the 9" model here.
GSA9 -
GSA75 Aluminum Stair Treads
Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".
Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.
Purchase the 7-1/2" model here.
GSA75- -
GSA11 Aluminum Stair Treads
GSA11 ALUMINUM STAIR TREADS
Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".
Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.
Purchase the 11" model here.
GSA11
