Search results for: 'case extens mountjackson exit device model 1095 top caps'
-
Von Duprin 88 Exit Device
Von Duprin 88 Exit Device
Von Duprin 88 rim devices for all types of single and double doors with mullion, UL listed for accident hazard installations. Field reversible, Five popular finishes, ships with 42" crossbar whichis field sizeable, Hex key dogging, 3/4"(19mm)throw latch bolt
Ships with all mounting hardware and strike.
88EO- -
Von Duprin 88 Center Case Rivet 090002
The Von Duprin 88 Center Case Rivet 090002 is also known as the Latch Tail Rivet used on the 88 Rim Device. The Rivet fits into the spring and into the Latch Tail 050500. The rivet measures 1-1/4 inches long less the head, with a 1/8 inch diameter. We sell this piece individually.
88r320 -
Von Duprin 22 Exit Device Only
Von Duprin 22 Exit Device Only
Von Duprin 22 rim exit device for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 161* cutouts. Fits door stiles as narrow as 3 13/16"
Ships with all mounting screws and the 299 strike.
22EO -
Von Duprin 2670 Guard-X Exit Device
Heavy Duty Design
The new Series 2670 Exit Alarm Lock provides secure protection through a large stainless steel deadbolt, which is 2" x 1/2" (51mm x 13mm) and has over a 3/4" (19mm) throw. The engagement area into the strike is over 1 1/4" (32mm) square inches. The cast aluminum latch case protects the internal mechanism and resists tampering or vandalism from inside the door. This unit has been tested to withstand up to 1600 pounds of static load force against the door.Fits 36" to 48" doors.
Uses 9 volt battery
Ships with all mounting hardware and strike.2670EO- -
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.
Von Dupin part # 050439
Old Part # 10072988R70- -
Von Duprin 55 End Case
The Von Duprin 55 End Case is the housing on the hinge side of the door. The function of this housing is to lift the cross bar, and support the function of the Active Case. If your housing is on the right side when standing inside looking out, then you would order the Right Hand Case. The package includes the housing, springs and back plate, the arm is not included. The current part number on this part is 050196 and 050197, the old part number is 111931 and 111932.
55R30 -
Von Duprin Exit Device 990TP Trim
The Von Duprin 990TP Trim is the standard Thumb Piece Trim for the 99 and 98 Series devices. The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish. The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws. The stanchions coming off the back of the plate line up with the center case mounting screws. The key cylinder locks and unlocks the thumb piece. The Rim Cylinder shown in the picture is not included.
Von Duprin Part # 990TP-R&V
Cylinder not included.
99TP -
Von Duprin 8827-F Top Latch Cover Kit
Von Duprin 8827-F Top Latch Cover Kit - 050465
This is the Top Latch Cover for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Durpin Part # 050465
Old Part # 96120688VR30F -
Von Duprin 22 Metal End Cap 900397
The Von Duprin 22 Mechanism Metal End Cap 900397 is new for 2016. This new kit replaces the 900397 with a metal end cap, which is has always been a weak link of the 22 series. The package includes the End Cap, Bracket and the Mounting Screws. This cap and bracket will work on all of the 22 and 2227 series.
Von Duprin part # 900397
G22R10M- -
Von Duprin Exit Device 88 Axle Package
Von Duprin Exit Device 88 Axle Package
Von Duprin 88 Axle Package
New style axle snaps together, and replaces the old style which were screwed together with allen wrenches. This style of axle has been around since about 1990. The piece on the right is only used for taking the axle apart.
Von Duprin Part # 090006 or 090082
88R40 -
Von Duprin Exit Device 990NL Trim
The Von Duprin 990NL Trim is the standard NIght Latch Trim for the 99 and 98 Series devices. The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish. The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws. The stanchions coming off the back of the plate line up with the center case mounting screws. The Rim Cylinder shown in the picture is not included.
Von Duprin Part # 990NL-R&V
99NL -
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Replacement Grip/Handle only, screws not included. Cast bronze construction, and then plated to the selected finish. The Grip measures 15/16" wide by 6" long. The center to center hole spacing is 5-1/2". This handle works on the Von Duprin 608, 696, 880, and 990 outside trim plates.
Von Duprin Part # 972466 and 972467
Old Part # 969925 and 959122G972466-
