Search results for: 'grey 8 drop brei door hager'
-
LCN Sentronic Door Closer 4040SE-168 Slider
LCN Sentronic Door Closer 4040SE-168 Track Slider
The slider is not longer sold separately, it is sold with the roller. You have to take the Assembly apart to get just the slider.
4040SE-168 -
Retractable White Poly Shower Seat
This rectangular folding shower seat is 18 inches by 16 inches and the one-piece white poly top is 1/2 inch thick. Tubular components are fabricated from stainless steel. All 34 are ADA compliant, and include a self locking mechanism to secure the seat upright when not in use.
9E703P -
Plastic Chair Tips Square Tubing 1 inch O.D. X 7/8 inch I.D.
Plastic Chair Tips Square Tubing For 1" Outside Diameter X 7/8" Inside Diameter Legs. Fits legs that are 1" outside diameter and have an inside diameter of 7/8", hollow legs. Black only
PS100B -
Plastic Chair Tips Square Tubing 3/4 inch O.D. X 5/8 inch I.D. Straight
Square Plastic Chair Tips for Straight Square Tubing chair legs with a 3/4" Outside Diameter X 5/8" Inside Diameter. Available in black only.
KPS75 -
Stamped SS Two Ear Bracket 7/8" Panel, 1-1/2" X 2-1/2"
Toilet Partition Two Ear Wall Bracket For 7/8" Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 3-13/16" with the mounting screws are 2-13/16" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and Two Wing Bracket. Manufacturer part # 1639.
Shipped with screws
9A1639 -
Stainless Steel Continuous Hinge, 57-1/2, Rh In Lh Out, 1/8" Pin
Toilet Partition Continuous Toilet Partition Hinge 57-1/2" With Spring Close Stainless Steel
Rh Inswing or Lh Outswing See Diagram16 gauge (.060" thick) stainless steel with 4 springs. 3" wide when laid flat x 57-1/2" long. 1/8" diameter hinge pin. Mounting screws are located every 11" or so. Can be raise up 3/8" for emergency entrance. Also known as a Bathroom Stall Piano Hinge, or Full Length Stainless Steel Continuous Piano Hinge. Manufacture part # 7659.
Shipped with all the fasteners
9A70C2 -
Safeglides-Brown 7/8 inch Base Diameter Nail On Glide
Safeglides-Brown 7/8" Base Diameter Nail On Glide for furniture. To install the glide, tap it into your wooden furniture.NG2015 -
Retractable Wood Grain Phenolic Seat lh
Retractable Wood Grain Phenolic Seat lh,This L-shaped reversible shower seat is ADA compliant and comes with a one-piece, one-half inch thick wood-grain phenolic top. The reversible L-shaped component allows the handing of the seat to be determined in the field. The seat is 32 inches by 23 inches and includes a self-locking mechanism to secure the seat in the upright position when it is not in use. The tubular components are fabricated from stainless steel.
9E803T -
Plastic Chair Tips Round Tubing 5/8 inch O.D. X 1/2 inch I.D.
Black Round Plastic Chair Tips for Round Tubing chair legs with a 5/8" Outside Diameter X 1/2" Inside Diameter.
PR62 -
85 Series Tube Balances-5/8" Diameter
85 Series Tube Balances, 5/8" Diameter.
This is the most common type of tube balance out there.
Other sizes are availableRed is more of an orange color, and is the most popular.Call to order they run about $9.00 to 12.00 ea.Wi85xxc -
Round Tubing 1 inch O.D. X 7/8 inch I.D. Spring Clip
Threaded spring clip for round legs. 1/4-20 thread for use with our LA10625 and SLA12525. 1" outside and 7/8" inside diameter. This spring clip has a 1/4-20 thread.
CLR100 -
Bobrick Surface Mounted Waste Receptacle with Disposal Door
Bobrick B-35639 surface mounted waste receptacle with disposal door in a satin finish stainless steel all welded construction. The door is secured to cabinet with a concealed full length stainless piano hinge. Equipped with a cable door swing limit and tumbler lock. Waste bin constructed of heavy gauge stainless steel. The unit is a 3 gallon capacity and is 14-13/16"w x 28-3/16"h x 4-1/2" depth.
B35639 -
Reinforced Rubber Crutch Tips 5/8 inch
Reinforced Rubber Crutch Tips For 5/8" Outside Diameter Round Chair Legs. The perfect solution when your metal chair leg punches through your rubber chair tip. Problem solved by placing the tube cap on the chair leg first, then the rubber chair tip to provide more of a surface area to displace the weight of the chair leg. Crutch tips help protect your floors from expensive damage. A variety of sizes available in both white and black color.
Part # - Color
CRT62BTC - Black
CRT62WTC - WhiteCRT62XTC -
Reinforced Rubber Crutch Tips 7/8 inch
Reinforced Rubber Crutch Tips For 7/8" Outside Diameter Round Chair Legs. Help protect your floors from damage. This application is for when your metal chair leg punches through your Rubber Chair tip. Using the Tube Cap on the chair leg first, then apply the Rubber Crutch Tip over the leg will solve that problem by providing more of a surface area to displace the weight. Available in black or white and a variety of sizes.
Part # - Color
CRT87BTC - Black
CRT87WTC - TanCRT87XTC -
Cast SS Two Ear Bracket For 7/8" Panel
Partition Two Ear Wall Bracket For 7/8" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 3-1/2" with 2-3/4" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall Two Ear Wall Bracket, or Two Ear 7/8". Manufacture part # 1633
Shipped with mounting screws.
9A1633 -
Corbin Russwin ED5200A Active Head
Corbin Russwin ED5200A Active Head
Used on the Corbin Russwin ED5000 Rim Devices, for fire rated doors. For non fire rated doors, order the G650F35-8. A fire rated door is a door were you can NOT use your allen wrench to dog, or lock, the door in the open position during business hours.
Corbin Russwin part # 650F36-8
Rim Cylinder Hub Position for the ED5200A
G650F36-8 -
Plastic Chair Tips Square Tubing 7/8 inch O.D. X 13/16 inch I.D.
Plastic Chair Tips Square Tubing for 7/8" Outside Diameter X 13/16" Inside Diameter. Fits square tubing legs with an outside diameter of 7/8" and an inside diameter of 13/16". Available in black.
PS87A -
Swivel Glide 5/8 inch O.D. X 1/2 inch I.D. Without Ferrule
Metal Based Swivel Chair Glide for a round tubing chair leg with a 5/8" O.D. X 1/2" I.D. This glide has a clip that holds the glide on by going inside the chair leg. The Chair Glides Base diameter is 1 1/4".
SGR62I -
Corbin Russwin ED5400 Exit Device
Corbin Russwin ED5400 Exit Device
Handing
Device is handed but easily field reversible.
Lever trim is handed.
Bar Length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36" door.
Door Thickness
1-3/4" (44mm) standard.
Stile
Minimum width 4-1/2" (114mm).
Door Height
Standard top rod for 7' door.Replacement parts are also available
ED5400 -
Cast SS U Bracket 1" Panel, 1-1/2" X 1-3/8" L
Toilet Partition U Bracket For 1" Thick Panel Cast Stainless Steel
Cast stainless steel construction. Bracket base is 1-3/8" x 1-1/4" with two mounting screw holes. Bracket legs project out 1-3/8" with the thru hole at 1" on center from the bottom of the base. Also known as a Bathroom Partition Stall U-Bracket or Wall Bracket 1". Manufacture part number 1913
Shipped with mounting screws
/p>9A1913 -
Continuous Stainless Steel One Ear Bracket 71", 7/8"x2-1/2"
Toilet Partition Stainless Steel Continuous One Ear Bracket, 71", 7/8"x2-1/2" 18 Gauge.
Stainless Steel Construction 18 gauge. One ear bracket is for 7/8" wide partitions and is 2-1/2" height by 2-9/32" wide by 71" long. Holes are typically spaced every 13-1/2" vertically. This bracket is also known as a Full Length Toilet Partition Continuous One Ear Bracket 71". Bracket has rounded edge radius. Designed to attach pilasters and/or panels to walls. Continuous brackets help eliminate sightline into stalls.
*Fasteners not Included *
Manufacture part # 204039
9A204039 -
Plastic Chair Tips Square Tubing 1-1/4 inch O.D. X 1-1/8 inch I.D.
Plastic Chair Tips for Square Tubing Chair Legs. This tip is For a 1-1/4" Outside Diameter X 1-1/8" Inside Diameter Chair Leg. Available in Black.
PS125