Search results for: 'cloth latch tube toilet acrylic slide top'
-
American Sanitary Slide Bolt Latch
American Sanitary Slide Bolt Latch Chrome Plated.
Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.
Shipped with mounting screws.
9AM500 -
Flush Metal Slide Bolt Latch
Flush Metal Slide Bolt Latch
Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.
Shipped with mounting screws.
9FL800 -
Bobrick Heavy Duty Clothes Hook
Bobrick B211 heavy duty clothes hook with exposed mounting. This mounts with three countersunk mounting screw holes. The hook and flange are one piece brass casting in satin nickel plated finish to match stainless steel. This hook withstands up to 300lbs downward pull. The diameter is 2-3/4" x 3/7/16" projects out from the wall.
B211 -
Bobrick Heavy Duty Clothes Hook with Concealed Mounting
Bobrick B2116 heavy duty clothes hook with concealed mounting. This product has three set screws for theft resistant mounting. The hook and flange are one piece brass casting in satin nickel plated finish to match stainless steel. This hook withstands up to 300lbs downward pull. The diameter is 2-3/4" x 3/7/16" projects out from the wall.
B2116 -
Von Duprin 8827-F Top Latch Cover Kit
Von Duprin 8827-F Top Latch Cover Kit - 050465
This is the Top Latch Cover for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Durpin Part # 050465
Old Part # 96120688VR30F -
Desk Top Plexiglass Brackets
Brackets designed to mount plexiglass/acrylic sheets to desk top or work surface when creating separation/barrier. Brackets are adjustable for thickness from 1/8" to 3/8". It is recommended for use of 1/4" Thick material. Sold as a Pair. Made of Aluminum Alloy. Screws and inserts included. Uses a 5mm/3/16" Allen Key(Not Included) to install screws These are available in either Silver or Black Finish. Silver Finish are readily available while Black Finish may have an extended leadtime depending on quantities being ordered.
Measurements
Height: 2-1/2"
Width:1-3/4"
Depth: 5/8"
Weight:About .6lb
PRM-DTB -
Von Duprin Exit Device 8827 Top Latch Case
Von Duprin 8827 Top Latch Case for non fire rated doors. This is the part that may be causing your bottom latch to drag on the floor. The Top Latch does all the work on the Von Duprin 8827. When the Top Latch is retracted, it holds the rods in the retracted postion.
Von Duprin part # 050460
Old Part # 10175088VR10 -
ADA Partition Slide Latch with Occupied Symbol
ADA Partition Slide Latch with Occupied Symbol. Stainless steel door lock surface mounted for 1" doors, this can be used for doors less than 1" if the rod is cut down between the two pieces. All hardware included for installation. This manufactures part number is 50553. Hole spacing is 3-1/2".
9A50553 -
Von Duprin 9927 Top Latch
Von Duprin 9927 Top latch
Used on all the Von Durpin 9827 and 9927's. This latch updates your current latch if your device was installed before October 1998. If your device is newer that October 1998, then use the G050400. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050091
G99VR10 -
Von Duprin Exit Device 3327 Top Latch 050400
Von Duprin 22, 33, and 9927 Top latch
This latch is used on the 2227, 3327A, and 9927 Surface Vertical Rod Devices. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws. The mounting bracket is sometimes included, and sometimes they are not. Call us and we will check.
Von Duprin Part # 050400
G050400 -
ASI Security Clothes Hook Square
Square Security Clothes Hook designed to snap down if excessive load is placed on hook. Fabricated from type 304 stainless steel, 12 gauge and backplate 14 gauge with satin finish. Product is offered in 2 mounting types: Front or Chase(Rear). Front mount has 4 dimbled holes through flange bracket and comes with torx mounting screws.Chase mount will come with rods welded to back and nuts for mounting. There are 3 options for the chase mount which you will have to select and each will come with specific sized rods to affix hook through wall. Options are to accommodate the wall thickness they will be mounted though. Designed in mind for Behavioral Health and Detention Centers.
Chase Options
- Less than 6" Wall
- Between 6"-8" Wall
- More than 8" Wall, Custom size
Dimensions
4-1/4″ x 4-1/4″ x 2-1/4″ (108 x 108 x 57 mm)
*** CHASE MOUNT DISCOUNTINUED 2024-25 ***
A10C -
Cone Style Table Stool Tops-Universal Fit
Cone Style Table Stool Tops-Universal Fit. Made of heavy duty HDPE Plastic. The Stool Tops are shipped with Stool Top, Cone, Fasteners, and Cone Sleeve. The removeable Cone Sleeve allows use with 1" and 1-1/4" diameter mounting tubes. The Stool measures 12-1/2" diameter and is 15/16" thick. The Cone measures 4-1/2" high. This Stool Top will work with 99% of the tables out there. Available in Black, Burgundy, Charcoal, Dark Blue, Royal Blue, and Red.
KTUNIVC -
ASI Security Clothes Hook
Security Clothes Hook designed to snap down if excessive load is placed on hook. Fabricated from type 304 stainless steel, bracket is 11 gauge and hook 7 gauge with satin finish. Product is offered in 2 mounting types: Front or Chase(Rear). Front mount has 4 holes through flange bracket and comes with torx mounting screws. Chase mount will come with rods welded to back and nuts for mounting. There are 3 options for the chase mount which you will have to select and each will come with specific sized rods to affix hook through wall. Options are to accommodate the wall thickness they will be mounted though. Designed in mind for Behavioral Health and Detention Centers.
Chase Options
- Less than 6" Wall
- Between 6"-8" Wall
- More than 8" Wall, Custom size
Dimensions
3″ x 5″ x 3-1/16″ (76 x 127 x 78 mm)
A10B -
Monarch 19-24-25-XX Top Latch 588
Monarch 19-24-25-XX Top Latch 588
Monarch 19-24-25-XX Top Latch 588 for non Fire Rated Doors. This latch has a long history, the old number is 588, and the new number is 650389. A non Fire Rated door is usually an exterior door, or a door that is not designed to contain the spread of fire.
Falcon Part # 650389
G588 -
Von Duprin 8827-F Top Latch Kit
Von Duprin 8827-F Top Latch Kit 050462
This is the Top Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Durpin Part # 050462
Old Part # 10267688VR10F