Search results for: 'rod black arobert babi and associated associates'
-
Von Duprin 8827 Chassis Tie Rod Pkg 050328
Von Duprin 8827 Chassis Tie Rod Pkg 050328
The 8827 Chassis Tie Rod Package is the rod that goes through the top and bottom latches. The Tie Rod is held in place by the Special Chassis Nut. The Tie Rod measures 1-3/8" long by 3/16" diameter.
Von Duprin Part # 050328
Old Von Duprin Part # 96761688VR195 -
Magnuson RRF Series Rak
RR-F Series
Rap Rak is the most versatile garment storage rack available anywhere. Coats can be hung on the center rod, on one side, or both sides of the shelf. Available in 60" (F Series) adult height in 4 foot lengths. Optional KSF hook rails are ideal for elementary school situations. 40-48 coat capacity. Available in powder coated steel finishes of Medium Gray, Sandstone, and Black.Price includes casters, hooks or hangers sold separately.MG-RR-4F-KSF -
LCN Door Closer Rod And Shoe
LCN Door Closer Rod And Shoe
This piece fits into the female part of all LCN Regular Arms. The old style had two concave set screws and a ball pressed into the rod. If the door over rotated the ball would pull out of the concave set screws. The new version has a pin holding the rod to the shoe which is designed to fail if the door is over rotated. This piece will work on the LCN 1260, 1460, 4010, 4020, 4030 and 4040 door closers with regular arms. Some of the really old models have multiple threaded holes, so you might have to drill a hole in the female tube. Part #'s 4040-79, 4040-79LR and 4040-79ELR. The 1260, 1460, 4010, or 4020 could replace the 4040 in those part numbers, they are the same.
79 -
Curtain Rod Kit, 1-1/4" x 60"
Kit includes rod with exposed flanges.
Flanges fabricated of 20ga. stainless steel with a satin finish. Flanges have (3) countersunk 13/64" dia. holes to accept #10 flat or oval head screws furnished by others.
Rod is installed in straight section between two (2) mounting flanges. Rods longer than 60′′ require ceiling hanger Model No 1204-C18.
For use with standard shower curtain model No ’s 1200 or 1200-V having 60′′ length and standard hooks Model No 1200-SHU unit should be installed with rod centerline 74-1/2′′ AFF or 67′′ above tub rim to obtain 6′′ bottom overlap.
CURT11/4x60 -
-
Curtain Rod Kit, 1" x 48"
Tubing is 1″ diameter x 20 gauge with a satin finish. 48" Length will be as specified. Rod is held captive by flanges when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.
CURTAIN1x48 -
Von Duprin 9927 Rod Guide Assy
The Von Duprin 9927 Rod Guide is the latest version of the Guide. The guide includes the metal strap and the nylon bushing the rod slides through, a major improvement of the original version.
Works on all of the Von Duprin 98 and 9927's. Replaces the old style which had the cover and springs.
Von Durpin part # 112063
G99VR35- -
Doromatic Exit Device 1690/1990 Rod Bearing PB3
Dor-o-Matic Rod Bearing. This is the piece that goes over the rod and fits into the traveller to take up slack.
Doromatic part # BUSH.109 or PB3
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199003 -
Curtain Rod Kit, 1" x 36"
Tubing is 1″ diameter x 20 gauge with a satin finish. 36" Length will be as specified. Rod is held captive by flanges when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.
CURTAIN1x36 -
Curtain Rod Kit, 1" x 60"
Tubing is 1″ diameter x 20 gauge with a satin finish. 60" Length will be as specified. Rod is held captive by flanges when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.
CURTAIN1x60 -
International 8730S Narrow Design Surface Vertical Rod
The International Door Closer 8730S is designed for narrow stiles. The minimum stile width is 2-19/32 inches. It will not work on a true narrow stile door witch is usually 1-3/4 inch. The 36 inch version is 33-15/32 inches and the 48 inch version is 44-3/4 inches. The device is rated Grade 1, which is the highest rating. Rods are 1/2 inch diameter tubular with rod guides. The exit ships will all screws and strikes need for instillation.
8730S- -
Curtain Rod Kit, 1" x 42"
Tubing is 1″ diameter x 20 gauge with a satin finish. 42" Length will be as specified. Rod is held captive by flanges when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.
CURTAIN1x42 -
Curtain Rod Kit, 1" x 72"
Tubing is 1″ diameter x 20 gauge with a satin finish. 72" Length will be as specified. Rod is held captive by flanges when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.
CURTAIN1x72 -
-
Norton Door Closer Rod and Shoe
Norton Door Closer Rod and Shoe
The Norton Rod and Shoe 7701-11 and 7701-11A come in two different lengths, 8-7/8" anc 12-1/2". The length is measured from the end of the bar to the center of the eyelet.
Norton Part #'s:
8-7/8" Long 7701-11
12-1/2" Long 7701-11A7701-11- -
Doromatic Exit Device 1690/1990 Top Rod Latch Assy.
Doromatic Exit Device 1690/1990 Top Rod Latch Assy.
Used on the 1490, 1690 and 1990 Concealed Vertical Rod Devices
Doromatic Part # PB130, and also 4270101806
G199025 -
Jackson 1085 Exit Device Concealed Vertical Rod
Jackson 1085 Concealed Vertical Rod Exit Device
Jackson 1085 Series Exit Device is universally recognized as the standard for aluminum storefront hardware. Made of high tensile strength aluminum.
Non Handed
Comes with 45" cross bar that is easily cut in the field, includes all screws, strikes and concealed vertical rods.Replacement parts are available, in stock!
1085EO -
-
Curtain Rod Kit, 1-1/4" x 48"
Kit includes rod with exposed flanges.
Flanges fabricated of 20ga. stainless steel with a satin finish. Flanges have (3) countersunk 13/64" dia. holes to accept #10 flat or oval head screws furnished by others.
Rod is installed in straight section between two (2) mounting flanges. Rods longer than 48′′ require ceiling hanger Model No 1204-C18.
For use with standard shower curtain model No ’s 1200 or 1200-V having 48′′ length and standard hooks Model No 1200-SHU unit should be installed with rod centerline 74-1/2′′ AFF or 67′′ above tub rim to obtain 6′′ bottom overlap.
CURT11/4x48
