Search results for: 'casemelong handlnt truth handle 2 3/8'

Heavy Duty Toilet Partition Gravity Hinge Set Lh Outswing, Rh Inswing Stainless Steel see diagram

1/8" thick stainless steel construction. 1-1/2" hole spacing up and down and 2-3/8" right to left hole spacing. Outside dimensions are 3-1/8" wide x 3" high. Also known as Bathroom Stall Gravity Hinge Sets. Manufacture part # 7052.

Includes all screws.

3 Pole Flag Stand - 1". The cast stand creates creates a display of 1, 2, or 3 flags. Supplied with adapter sleeves for various pole diameters. Not intended for outdoor display. This flag stand weighs 34 pounds and is in memorial bronze color. 

Bobrick B-298 offers a 8" depth stainless steel shelf with options of 18" or 24" lengths. This unit is 18 gauge type 304 stainless steel with a satin finish. The front and side returns are 3/4". the front edge is hemmed for safety.

Toilet Partition Keeper For Inswing Doors 1-7/8" Between Screws Stainless Steel

14 gauge (.075" thick) stainless steel construction. Keeper is 2-7/8" high x 1-13/16" wide with 1-7/8" hole spacing. Lip is 9/16" and the slot or cut out is 7/32" x 1". Also known as Bathroom Stall Keeper Inswing. Manufacture part # 6319.

Shipped with screws.

The 459 Flush Door Pull measures 3-3/8 x 4-3/4 x 1/8 inch.  The opening size is 1-3/4 by 3-1/2 inches.  The mortised pocket would need to be 3-3/4 by 2-13/16 and 11/16 deep. The flush pull ships with mounting screws in the matching finish.

Toilet Partition 'U' Wall Bracket For 1" Thick Panel Stamped Stainless Steel

14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 1-13/16" . Leg project out 1-1/2" with the thru hole at 1-1/8" from the base. The 4 thrue holes are 1/4" diameter, two of them are the mounting holes. Also known as a Bathroom Stall U Wall Bracket. Manufacturer part # 1919.

Shipped with screws

Von Duprin 1606 Rim Device Strike for Panic Devices only.  Strike measure 1-3/8 x 2-7/8 with a 3/8 inch projection. The hole spacing is 2-1/8 inches.

The Berlin bleacher nylon glide P1501BE has an outside diameter of 3/4", a collar outside diameter of 1/2" and a inside diameter of 3/8", with a thickness of 3/8"

1-1/4" diameter materal
Offset Door Handle
Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.

Please specify either wood or metal door, and its thickness; we'll supply
appropriate fasteners.

Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes

Finishes

The Interkal Bleacher Drive Wheel is also known as 216008 or Part # P2000VI.

The Interkal Drive Wheel for Bleachers is also compatible with Vectra bleachers. With a 6" diameter x 2-7/16" width x 1" axle, it is set to suit your specific bleacher needs. The Interkal Bleacher Drive Wheel comes with a key ring for your convenience, making maintenance and replacement easy. The wheel is designed to offer durability and efficiency. Interkal Bleacher Drive Wheels are ideal for moving bleachers smoothly and safely, making them perfect for sporting events, school activities and other gatherings.

The Interkal Drive Wheel for Bleachers is made from high-quality materials that resist wear and tear, ensuring it will last through many seasons of use. Its smooth rolling action minimizes strain on the bleachers, helping to preserve its structure over time. With a robust construction, Interkal Bleacher Drive Wheels can handle heavy loads while still being easy to install. The 6" diameter ensures they perform well on a variety of surfaces, and the 1" axle allows them to be easily attached to your existing bleachers. This makes it possible to spend less time maintaining your bleachers and more time enjoying the events you host! Plus, the compact size of Interkal Bleacher Drive Wheels means they won’t take up much space when not in use, making storage easy and convenient. Whether you are a school, sports club or event organizer, the Interkal Bleacher Drive Wheel offers the reliability and functionality you need.

Don’t let cumbersome bleachers hold you back from hosting successful events. Replace or install the Interkal Bleacher Drive Wheel today and experience the difference in mobility and safety. For special inquiries regarding the Interkal Drive Wheel for Bleachers, our customer service team is ready to assist you. Make your next event a breeze with Interkal Bleacher Drive Wheels!

Penco Products door frame assembly are the whole front face of the lockers. Includes door, frame and all latching with handle choice. This takes 6-8 weeks delivery. These doors are standard louvered known as the vanguard lockers. These lockers are typically in the hallways of schools. 

color chart

Comtec Toilet Partitions 8" Ada Hinge Set, 3 Hinges Total. Clear anodized aluminum for 1" panel and 1" door. Used by every Bathroom Toilet Stall manufacture on Solid Plastic Toilet Partitions Doors. Manufacturer part #'s 7978, 7988, 8974, 8984. These hinges are reversible by taking the 3 pieces apart and reconfiguring the opposite swing.

The Aluminum Flag Wall Bracket 1/2 inch and 3/4 do not have thumb screws. This flag pole bracket Displays pole and flag at a 45 degree angle.

Non swivel glides for round tubing

5/8" outside diameter
7/16", 1/2" and 9/16 inside diameter
1-1/16" base diameter
Nickel plated metal base

3 Pole Flag Stand - 1 1/4". The cast stand creates creates a display of 1, 2, or 3 flags. Supplied with adapter sleeves for various pole diameters. Not intended for outdoor display. This Flag stand weighs 34 pounds and the color is memorial bronze. 

The Burns 618 Locking Pocket Door Latch is 2-3/4 inches tall by 2-1/2 inches deep. The mortise dimensions are 2-5/16 inches tall by 1-7/8 inch deep. Base metal is Brass or Aluminum depending on the finish.

Von Duprin 992/994 Lever Lift Spring 971573

The spring measures 1-5/8" long with a 7/16" diameter. We find two of these springs per 992 and 994 series lever trims. These springs help support the lever handle and return it to the proper position.

Von Duprin Part # 971573-00

Partition Headrail End Plug 1" X 1-1/2" HIGH

Chrome plated Zamac die cast construction. The head rail end plug measures 1" wide by 1-1/2" tall. The pegs that hold it in place project out 3/4". Also known as a Bathroom Stall Head Rail End Plug. Manufacture part # 6660.

#6 X 3/4" Stainless Steel Sheet Metal Screws furnished.

Screw holes are slotted for adjustment

Extruded aluminum, with nylon brush

 FEATURES

• Please note the factory will only sell in quantities of 10.
• Supervisory key control
• Ergonomic dial with grip ring and non-slip coating
• Automatic locking
• 7 pre-set combinations for extended usage
• 3-digit dialing combination with 5-pin tumbler key plug
• Patent pending button guard to protect lock function from overstuffed lockers
• Nut channels for easy installation
• All Built-in Combo Locks have a 10 year warranty from time of shipment
• 72 hour shipping available

APPLICATIONS

• Fits all lift handle gravity latch, multi-point lockers
• Model 1930 is for use with locker door hinged on right; similar in operation to Master Lock 1630

Medart Locker Lock Bars, Used in November 1994 - January 1998. Includes 2, 3-piece latch assemblies.

Comtec Toilet Partition 8" Wrap Around Hinge Set. Clear anodized aluminum for 1" panel and 1" door. Used by every Bathroom Toilet Stall manufacture on Solid Plastic Toilet Partitions Doors. Sometimes known as part numbers, 7978, 7988, 8974, 8984. These hinges are reversible by taking the 3 pieces apart and reconfiguring the opposite swing.

The Roto Notched Out SS Connecting Arm with Bracket is used with older Roto Operators.  Arm measures 6-7/8" long and the die cast bracket measures 2-1/8" long.

Door Pull 30

10" centers
11" overall
2-7/8" projection
1-3/4" offset

Finishes

1630 master lock built in locks.
Automatic Locking Bolt
For Lockers with handles and automatic locking bars
Locking bolt moves vertically
We will need your master key number if adding to your existing system. Master keys start with "F" and has digits after it.
1-2 week lead time

Emco D10 Aluminum Hook

Hook Information
Materials: Aluminum
Height: 2 3/4"
Width: 3/4"
Projection: 2 3/8"
Color Options: Almond Antique Brass Black Dark Brown Silver

Reinforcing Pivot Hinge - For use with 4-1/2" wide butt hinges

3/4" to center line of 4-1/2" hinge pin.
Pin uses large pin and bushing.
Used to dampen vibration and increase
strength to your full mortise butt hinges.
Constructed of heavy duty cold rolled steel.
Made of Zinc Plated Steel
Supports weights up to 300 lbs

Manufacturer part # B1923
Our part # DR1923 for Right Hand, DL1923 for Left Hand

These hinges are no longer handed, you can select right or left, but the hinges will work both ways.

Double Prong Ceiling Hook

Heavy Duty Zinc Plated Steel Wire.
2-3/4" height
3-1/2" wide
1/4" diameter wire
7/8" hole spacing

Universal Bleacher Double Pulley, 1/2"x5/8"x2-3/8"dia.

Roto Split Arm Operator

The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8"

Right Hand shown in the picture

Rubber Chair Tips For Chair Legs With An Outside Diameter Of 1-1/8". Rubber feet are for round chair legs with an outside diamter of 1 1/8". Tips are for Hampden, Krueger and Samsonite chairs. Available in Black or Gray.

The Falcon OHC100 and OHC101 Door Closer Body Only are designed for a wide variety of Doors.   The OHC100 is for use on larger exterior doors and has spring size adjustments of 3-5.   The OHC101 is designed for smaller or interior vestibule doors, with an adjustable spring size of 1-3.

Dor-o-Matic 1990 repair kit. The kit includes the following:
4 Mounting Studs
1 Hex Key 7/32"
1 Allen Key 1/8"
1 Pinion
1 Cylinder Bushing
2 Rod Bushings
1 Retractor
1 Traveller Assy

Doromatic part # 4270902091 or PBX-2

1990 parts breakdown

Global Partition Complete Solid Phenolic Between 2 Wall Partitions, Overhead braced floor mounted stalls. Standard stalls 36"x60" depth (24" door), ADA stall 60"x60" depth (36" door). All stainless steel hardware included. Doors can be either in or out swing. Up to 8 standard stalls total or 7 standard and 1 ada stall. To have an ADA stall you must select 1 ADA 24x60, plus 1 standard stall for 1 complete 60 x 60 ada stall. To have an ADA stall & standard stall, you must select 2 standard stalls and 1 ADA stall 24x60. Color Thru is 10 days and Black Core ship in 5 Days, 2-4 days travel.
Global Solid Phenolic Color Chart

The Aluminum Flag Wall Bracket 1/2 inch and 3/4 do not have thumb screws. This flag pole bracket Displays pole and flag at a 45 degree angle.

Wayne Bleacher Lower Wheel Channel Keeper 2" x 2".