Search results for: '1 1 4 5 wall brace'

Toilet Seat White Regular 16-5/8" x 14-1/4" no cover white

Toilet Seat Black Regular 16-5/8"" X 14-1/4" wide. No cover.

Torque Head Barrel Nut Shoulder Screw for 1-3/16" - 1-3/8" gripping. Use with torque driver bit T27 for toilet partition security screws. 10-24 thread chrome plated and uses a 6 lobe  head torque. Both pieces included.

Cast stainless steel 5-1/2" double door pulls, for 3/4" thick doors. Also known as 900112 Replaced by 630112. Overall width is 6-3/4" and has hole spacing of 5-7/8" between screws.

Two Hole 1-3/8" Window Handle 9/32" Lockup Most Popular

This window handle is constructed of cast white bronze with a brushed nickel finish. The handle has a 1-3/8" hole spacing with 9/32" lock up dimension. This window handle is one of our most popular.

Right Hand shown in Picture

Concealed Partition Latch Keeper Bumper 1" Square Edge Cast Stainless Steel

Cast stainless steel construction. The strike and keeper measures 2-1/2" tall by 1-15/16" wide by 1-17/32 deep. The mounting holes are 1-1/2" on center. The stop measures 7/8" wide by 17/32" deep with a rubber insert bumper. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1". Manufacture part # 5733.

Shipped with mounting screws.

Safeglides in White, 1 1/2" Base Diameter Nail On Glide for wood legs and furniture. To install the glide, tap it into your wooden furniture.

Project In Handle With Ring Pull -1-3/8" hole spacing with a 7/16" lock-up C Dimension

Cast white bronze with a brushed nickel finish

The Norton 7700PT Slider measures 2-1/16" long by 1-1/4" wide and 5/8" thick, excluding the metal clip on the back.

Drawer Pull 4" Centers Stainless Steel. Stainless steel wire pull with the measurement 4-1/4" wide x 1-1/4" projection. The 8-32 screws are included.

Angle Base 1-3/8" Window Handle-1/2 Drop With Ring Pull

Cast white bronze with a brushed nickel finish

The Hussey Bleacher 1/2 Horsepower Motor Single Phase is also known as 1033934 or Part # P2019HS.

The Hussey Bleacher 1/2 Horsepower Motor 1 Phase is designed for reliable performance in various applications, particularly in sports and entertainment settings where bleachers are involved. Its robust construction ensures durability, making it suitable for both indoor and outdoor use. When you are upgrading existing equipment or installing new bleachers, the Hussey Bleacher 1/2 Horsepower Motor Single Phase is an excellent choice for maintaining safety and functionality.

The Hussey Bleacher 1/2 Hp Motor 1 Phase is a 115 volt motor that provides ample power to operate bleacher systems efficiently with 1/2 horsepower, allowing for smooth and quiet operation. With a speed of 1725 RPM, the Hussey Bleacher 1/2 Horsepower Motor Single Phase delivers the necessary torque to handle the demands of raising and lowering seating arrangements.

Installation of the Hussey Bleacher 1/2 Horsepower Motor Single Phase is straightforward, and the motor is compatible with Hussey's gearboxes, specifically the 70:1 and 60:1 models, ensuring seamless integration into existing systems. This Hussey Bleacher Motor Single Phase is used with Power III and Power Trac IV (Single Phase). Whether you're upgrading an old motor or installing a new one, the Hussey Bleacher 1/2 Horsepower Motor Single Phase is a dependable choice that meets industry standards.

For maintenance, regular checks on the motor's connections and lubrication of moving parts will help prolong its lifespan. With proper care, this motor can provide years of reliable service, making it a valuable investment for any facility. Overall, the Hussey Bleacher 1/2 Hp Motor 1 Phase is an outstanding option for anyone looking to enhance the functionality of their bleacher systems. Order the Hussey Bleacher 1/2 Horsepower Motor Single Phase online today!

#6 X 3/4" Stainless Steel Sheet Metal Screws furnished.

Screw holes are slotted for adjustment

Extruded aluminum, with nylon brush

The Burns 618 Locking Pocket Door Latch is 2-3/4 inches tall by 2-1/2 inches deep. The mortise dimensions are 2-5/16 inches tall by 1-7/8 inch deep. Base metal is Brass or Aluminum depending on the finish.

Window Strike 1/8" Thick Offset

1-3/8" hole spacing x 1/8" thick

white bronze construction with nickel plating

The 460 ADA Flush Pull measures 5 inches by 5 inches  and is made of 1/8 inch material.  The opening size is 3-1/2 inches by 3 inches. The pull is fastened to the door with 10-24 by 5/8 inch security torx with barrel nuts.  The pull is designed for 1-3/4 thick doors, please specify if your door is thicker than 1-3/4 inches.  Available in Brushed and Polished Stainless Steel and also Powder Coated Flat Black and Dark Bronze.

3 Prong 5/8" Slide For Wood Furniture

5/8" base diameter. Metal base slide for wood furniture. You should use a diameter that aproximately half the diameter of furniture leg.

Universal Bleacher Pulley Fastener 1-5/8" in overall length. The shoulder part is 3/4"x1/2" diameter and uses a 1/4" allen head bolt.The thread is 3/8-16.

Roto Casement Sash Lock

Housing measures x 4-3/4" tall by x 3/4" wide. The hole spacing is 3-15/16" center to center. The lifting finger projects out 1-1/8"" with the cut out measuring 11-16" deep by 5/16".

Hand Dryer designed for Behavioral Health appliactions with Anti-Ligature features, angles top, welded corners, single tube exhaust prevent looping, tying off and prying. 18 Gauge Tamper-Resistant Stainless Steel cover and flush pin-hex security screws. Designed for Behavioral Health and Detention Centers. 

Voltage Options

MH-1 (115-120V)

MH-2 (208-240V)

Republic Steel Locker Screw 8-32 X 1/2" 8-32 X 1/2"

one way screw #10 x 5/8" long, 11/32" head x 3/16" tread. Use a flat head screw driver to install.

Project In Window Handle 1-3/8"

This window handle has a hole spacing of 1-3/8" with a 7/16" lock up C Dimension. The handle is constructed of cast white bronze with a brushed nickel finish.

Bleacher Bolt Fastener Type L, 5/16-24 x 2" Long.

Rubber Crutch Tips For 1" Round Chair Legs. This chair tip fits round chair legs with an outside diameter of 1" and it is available in black or white.

Black CRT100B

White CRT100

Corner Guards-Clear Plastic 313 - 2-1/2" X 2-1/2" X 48"

.120" thick Clear polycarbonate construction with screws included for mounting. 2-1/2" legs by 48" long. Longer lengths are available, please call for pricing.

Bobrick B-3961 recessed convertible paper towel dispenser with waste receptacle in a satin finish stainless steel. Touch free pull towel mechanism dispenses 12" length per pull of universal of 8" wide and up to 8" diameter.. Removable leak-proof waste container has a 12 gal. capacity. Rough wall opening 15-7/8"w x 54-5/8"ht x 4" minimum depth.

Von Duprin 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4-3/4" (121mm). The Von Duprin 9875 device has a smooth mechanism case and the Von Duprin 9975 device has a grooved case. The mortise lock device is non-handed

Toilet Partition Stainless Steel Continuous Angle Bracket, 71, 18 Gauge.

Stainless Steel Construction 18 gauge. Angle bracket is 1" wide by 2-1/4" height and 71" long. Holes are typically spaced every 13-1/2" vertically. This bracket is also known as a Full Length Toilet Partition Continuous Angle or L Bracket. Angle bracket has rounded edge radius. Designed to attach pilasters and/or panels to walls. Continuous brackets help eliminate sightline into stalls.

*Fasteners not Included *

Manufacture part # 182689

Flush Metal Partitions Bottom Hinge For 1-1/4" Round Edge Post

Chrome plated Zamac die cast construction. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010.

Shipped with mounting screws.

A=1-7/6"

Norton Door Closer Rod and Shoe

The Norton Rod and Shoe 7701-11 and 7701-11A come in two different lengths, 8-7/8" anc 12-1/2".  The length is measured from the end of the bar to the center of the eyelet.

Norton Part #'s:
8-7/8" Long  7701-11
12-1/2" Long 7701-11A

Double Roll 9" Jumbo Roll
Universal All Brand 9" Jumbo Tissue with 3-3/8" Cores,
White Impact Resistant Plastic Back.

Dimensions & Weight:

• Width: 20-1/4"
• Height: 11-3/4"
• Depth: 5-1/2"
• Weight: 3.75 lbs

Capacity: Two 9" Rolls (3-3/8" Core)
F Model - Two 9" Rolls (2-1/4" - 3-3/8" Core)

Key Type: 1