Search results for: 'reinforced rubber table tip 1 1 8'

ASI Visual Display RetroFit Boards RF. RetroFit boards fit easily over existing framed boards. No need to remove existing board. Magnetic porcelain enameled steel surface. Satin anodized aluminum trim, no tray. Factory-drilled, counter-sunk holes in aluminum frame. Installation can be done in minutes. Innovative board design offers perfect solution to old board replacement or adhering skins.

Marsh Advantage

Reduces cost with less installation time. No need to remove existing board. Marker packet sent with each Marsh Retro-Fit markerboard. Installation hardware sent with board.

#6 X 3/4" Stainless Steel Sheet Metal Screws furnished.

Screw holes are slotted for adjustment

Extruded aluminum, with nylon brush

Grab Bar Installation Kit Concealed 1" Panel 3"dia SS plate stud/nut

Square Chair Turing Metal Swivel Glide with a Square Tubing measurement of 7/8" O.D. X 3/4" I.D. This metal swivel glide has a 1 1/6" base diameter and also has a ferrule. 

Stainless Steel #12 X 2-1/2" Screw 6 Lobe(T-27), 1/2" diameter head, also known as a 91909. This uses a Torx bit to drive screw.

Replacement roller for the Control-O-Roll Toilet Paper Dispensers 6-1/2" wide

The 1/4 HP Single Phase Gear Motor by Irwin is also known as Part # P6000IR.

The Irwin 1/4 HP Single Phase Gear Motor features ¼ horsepower, 115 volts, and 4 amps. It operates at a speed of 12 RPM, which is ideal for the controlled movement required in bleacher systems. This slow and steady pace ensures that the bleachers can be deployed and retracted safely, minimizing the risk of accidents or damage.

One of the standout features of the Irwin 1/4 HP Single Phase Gear Motor is its robust construction. Built to withstand frequent use, the Irwin 1/4 HP Single Phase Gear Motor is made from high-quality materials that enhance its longevity. This means less downtime for maintenance and repairs, allowing facilities to focus on their events rather than equipment issues.

Installation is simple, thanks to the Irwin 1/4 HP Single Phase Gear Motor's user-friendly design. It can be easily integrated into existing bleacher systems, making it a convenient choice for upgrades or replacements. Additionally, the Irwin 1/4 HP Single Phase Gear Motor's compact size allows it to fit into tight spaces without compromising performance.

The 1/4 HP Single Phase Gear Motor by Irwin is a fantastic choice for anyone looking to enhance their bleacher systems. With its reliable performance and durable construction, the Irwin 1/4 HP Single Phase Gear Motor stands out as a top option for schools, gyms, and auditoriums alike. Whether you are setting up for a sports event, a concert, or a community gathering, the 1/4 HP Single Phase Gear Motor by Irwin ensures that your bleachers will function smoothly and safely.

Lastly, remember that investing in quality parts—such as the Irwin 1/4 HP Single Phase Gear Motor—can significantly enhance the performance of your bleachers. The Irwin 1/4 HP Single Phase Gear Motor motor is designed for durability and efficiency, ensuring that your bleachers operate smoothly for years to come.

For any questions or assistance with your purchase of the 1/4 HP Single Phase Gear Motor by Irwin, don’t hesitate to reach out. We are here to help you make certain that your bleachers remain a safe and welcoming space for everyone.

The Roto Notched Out SS Connecting Arm with Bracket is used with older Roto Operators.  Arm measures 6-7/8" long and the die cast bracket measures 2-1/8" long.

26" Diameter Acrylic 180 Degree 1/2/ Dome Mirror. 1/2 Dome Acrylic Mirror, 26" diameter. Covers up to 200 square feet.

Marsh 1" Combo. Hook/Clip for 1" map rail. Made of extruded aluminum. Use for displaying maps and visual aids in the classroom. 

Partition panel bracket kit for 1" panel, Two eared chrome plated bracket. Part includes all security fasteners to install the brackets. Also known as 615030. 

Partition panel bracket kit for 1/2" panel, Two eared cast stainless steel plated bracket. Part includes all security fasteners to install the brackets. Also known as 615003. Global's 40-8275020. 

Tubing is 1″ diameter x 20 gauge with a satin finish. 48" Length will be as specified. Rod is held captive by flanges when installed properly. Rod may rotate in flanges if turned by hand. Correctly installed rod and flanges will support specified shower curtain(s) hung on hooks 1200-SHU or others. Rod will bend and pull from flanges if significant body weight is suspended.

Jack Nut 1/4-20

The Jack Nut is used on hollow metal doors to fasten door closers, door closer arms, exit devices and continuous hinges.

Partition Door Pull 3-1/2" Between Screws Chrome Plated

Chrome plated Zamac die cast construction. The pull measures 4-3/4" wide and projects 1" with a hole spacing of 3-1/2". The mounting holes are threaded for a 10-24 screw. Also known as a Bathroom Stall Door Pull. Manufacture part # 5400.

The Swivel Glide 5/8" O.D. with Ferrule Outside Holding Clip Nylon Base is used on American Desk, Artco Bell, Carter Craft, Krueger, Peabody and Virco Chairs. Nylon or Plastic Base Glides slide easily across floors as long as the floor is free of grit and grime.  When you do have grit or grime on the floor, it gets impregnated in the nylon and will scratch the floor.  The top freely swivels beyond 30 degree angle. Glide grips leg with outside holding clip, meaning it grabs and holds on to the outside of the leg, see more views for picture of outside holding clip.  This glide is designed for 5/8" outside diameter legs, and the base is 1-1/4" in diameter.

Wayne Bleacher Spacer 5/16" x 1/2"dia.

Partition screen urinal bracket kit for 1" thick panel, two ear bracket that is cast Stainless Steel plated. All bracket kits include security screws to mount the brackets. Also known as 615513. 

Metal Chair Swivel Glide for a chair with round tubing with measurements of 1/2" O.D. X 11/16" I.D. With Ferrule. Used on American Desk Chairs and various other manufacturers, fits 1/2" inside diameter, and 11/16" outside diameter tubing. 1 1/4" metal base. 

Chrome plated inswing door kit for square edge doors and posts. For 1" doors and 1" post. All hardware screws included for installation of these products. All hardware is a gravity close so your door self closing every time. Also known as part number 11300.

Slotless Bolt 10-24 X 1/2" for locker hooks, sides, tops, bottoms of lockers. Manufacturer part number 8633H.

Partition panel bracket kit for 1" thick panel, One eared bracket that is chrome plated. All bracket kits include security screws to mount the brackets. Also known as 615050. 

Partition Door Pull 3-1/2" Between Screws Cast Stainless Steel

Cast stainless steel construction. The pull measures 4-3/4" wide and projects 1" with a hole spacing of 3-1/2". The mounting holes are threaded for a 10-24 screw. Also known as a Bathroom Stall Door Pull. Manufacture part # 5403.

Bleacher Bolt Fastener Whiz nut 1/4-28.

aluminum bleacher clips 3-1/2".The grooves are 3" for the outer groove and 2" apart are the inner grooves. Includes bolt and nut which are zinc cadmium plated.

Cast Stainless Steel

Used on many Toilet Partition Manufacturers Plasitc Laminate stalls

40-8562304

The Republic Storage #8 locker handle was made from 1936 to 1959. This locker handle was the only locker handle Republic Storage used in that time period. However, back them they were called Berger, then Republic-Berger, then Republic Steel, now they go by Republic Storage. The locker handle is 5-3/8″ long and 1/2″ wide. The screw holes are 3-3/4″ on center. Only 500 or less in stock, special order for more than. The handle is made of a die casting that is then chrome plated. The screws to attached the handle to the locker bar are included with the handle.

Kit includes rod with exposed flanges.

Flanges fabricated of 20ga. stainless steel with a satin finish. Flanges have (3) countersunk 13/64" dia. holes to accept #10 flat or oval head screws furnished by others.

Rod is installed in straight section between two (2) mounting flanges. Rods longer than 48′′ require ceiling hanger Model No 1204-C18.

For use with standard shower curtain model No ’s 1200 or 1200-V having 48′′ length and standard hooks Model No 1200-SHU unit should be installed with rod centerline 74-1/2′′ AFF or 67′′  above tub rim to obtain 6′′ bottom overlap.

1/4-20 threaded insert for wood furniture. Used to fasten to wood leaving a flush surface. Adapts to the LA10625, LA17525P, SLA12525, and SLA12525P

VIRCO SLED BASED GLIDES Fits 1" outside diameter tubing. Glide has 3/4" base diameter. Stem diameter is 1/4" x 9/16" high.

Alcove One Ear Bracket Panel Kit for 1/4" Offset. This kit is used for panel to pilaster 1/4" offset and for 1" panel to wall bracket cast stainless steel plated. Security screws included. Also known as 615363.

Full Surface 4-1/2" Door Hinge-3 per box

Full Surface, steel construction, five knuckle, two bearing butt hinge.  Sold 3 in a box with wood and machine screws.   Available in Brushed Chrome and Paint Primed.  Ships from California.

Indoor Flag Stand - 1". These cast stands are designed to compliment any flag set. Easily movable, these are the most practical stands for general use. This flag base weighs 15 pounds. The flag stand is 12" diameter and 6" high. 

The Ives Wall Bumper Stop WS407-CVX our economically price wall bumper.  The metal ring is a wrought stainless steel, otherwise known as stamping.  It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time.   Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten.  The bumper is 2-1/2" in diameter and projects out 1".

Universal Bleacher Spring 2-1/2" long.