Search results for: 'glide 8 drawer burn door holder'

Ives Plunger Type Holder FS1154

Features:

• Constructed from heavy-duty cast brass or bronze.
• Plunger and internal parts are plated steel and provides a 1-1/4" throw for all types of doors.
• Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever.
• Round non-marring rubber shoe is securely fastened with a screw in flanged cup to prevent movement or loss. When worn, shoes are easily replaced.

Ives Part # FS1154

Non swivel chair glides for round tubing

3/4" outside diameter
9/16" and 5/8" inside diameter
1-1/16" base diameter
Nickel plated metal base

Non Skid Glide Cap Protective Chair Tip

This Glide Cap has a non skid rubberized bottom to prevent you chairs from sliding, while at the same time providing protection for your floor. This cap will fit on all of our Metal and Nylon Based Swivel Glides.

This Glide Cap is designed for use with our SGR Glides, or Swivel Glides Round 1-1/4" bases.

Smooth Bottom Glide Cap Protective Chair Tip

This Glide Cap has a smooth bottom to prevent your chairs from scratching your floors, while at the same time extending the life of your current glides. This cap will fit on all of our Metal and Nylon Based Swivel Glides.

This Glide Cap is designed for use with our SGR Glides, or Swivel Glides Round 1-1/4" bases.

Floor Saver Glide Cap Protective Chair Tip

This Glide Cap has a raised ring on bottom to prevent your chairs from scratching your floors, while at the same time extending the life of your current glides. The raised ring will push the dirt that is on the floor away so it will not scratch the floor. This cap will fit on all of our Metal and Nylon Based Swivel Glides.

This Glide Cap is designed for use with our SGR Glides, or Swivel Glides Round 1-1/4" bases.

Krueger Swivel Glide for 7/16" Inside Diameter and 5/8" Outside Diameter Metal Tubing Leg

This plastic swivel glide is not longer made, but you can use the SGR62AN or SGR62I as a replacement. The SGR62AN will work, but not if you are stacking your chairs. The SGR62I ( the last letter is I, as in Island) is the one you want to use if you stack your chairs for storage. See the "Related Products" on the right hand margin of the page.

1/4-20 thread Leveler swivel nylon base glide. Stop wobbling of uneven floors with this Metal Furniture Foot.  1 1/8" base diameter and 1 1/8" stem length. Screw into a thread leg hole to reach your desired height. Combine with a tnut to install in wooden furniture legs. 

3/4" Nail On Glide Felt Bottom

This nylon glide is ideal for replacing the metal caps on wooden chairs when they are on hardwood floors or tile.   Simply remove the old metal cap with a screw driver and nail on the 3/4" outside diameter felt bottom glide.

Chrome Double TP Holder

Berlin bleacher end glide. Newer version used with scissor arms.

Nylon Glide Caps-1-1/16". Fits over table and chair glides that have an outside diameter of 1-1/16".  Made of a natural white nylon, that will not color or scratch floors. Protect your floors from scratching with this Nylon Glide Cap. 

Chrome Single TP Holder for commo Tissue rolls.

VIRCO SLED BASED GLIDES Fits 1" outside diameter tubing. Glide has 3/4" base diameter. Stem diameter is 1/4" x 9/16" high.

Berlin bleacher glide for old style scissor arm.

Nylon Glide Caps-1-1/4". Fits over table and chair glides that have an outside diameter of 1-1/4".  Made of a natural white nylon, that will not color or scratch floors.

Wall Mounted Holder/Stop WS445

• Constructed in cast of brass or aluminum.
• Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike.
• Unit requires manual disengagement to release Hold-Open.
• Replaceable resilient, non-marring rubber tip.

WS445 is packed with expansion shield and lead shield for masonry type mounting.

Nylon Glide Caps-1-7/32". Fits over table and chair glides that have an outside diameter of 1-7/32".  Made of a natural white nylon, that will not color or scratch floors.

Safeglides-Brown 1" Base Diameter Nail On Glide for furniture. To install the glide, tap it into your wooden furniture.

Metail Swivel Chair Glide for a chair leg with a 3/4" O.D. X 9/16" I.D.  This chair glide has a Ferrule and Nylon Base. The nylon base is 1 1/4" in diameter. This glide is made for American Seating and Griggs. This Nylon Base Swivel glide has an internal holding clip. Chair glides are very popular in schools and institutions and move easily across smooth or carpeted floors.  Metal base glides are nickel plated and are extremely durable, but when they do wear out, they will scratch the floor.  The glide freely swivels beyond 30 degree angle. Glide grips leg with outside holding clip, meaning it grabs the out side of the leg, see more views for picture of outside holding clip. 

Metal Swivel based Chair Glides for Heywood Wakefield Chairs. This Chair glide is used on a round tubing chair leg with a  9/16" O.D. x 7/16" I.D. This glide is With Out a Ferrule. The base of this glide is 1 1/4". This glide has a clip that holds the glide on by going inside the chair leg. 

Door Pull 26 1" Diameter

This door handle is made of 1" round stock in either solid, aluminum, brass or stainless steel. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.

1" diameter material
2-3/4" projection

Finishes

8" GDP810
10" GDP101
12" GDP121

1-1/16" Nail On Glide-Nickel Base

Nail on furniture glide, 1-1/16" diameter nickel plated metal base

1-1/4" Nail On Glide-Nickel Base

Nail on furniture glide, 1-1/4" diameter nickel plated metal base

Metal Swivel Chair Glide with a 11/16" O.D. X 9/16" I.D. W/O Ferrule. Measurement is the chair leg diameters.  Used as a replacement for the American Seating glide, used on the Alert Line chairs. This chair glide has a 1 1/4"  metal base diameter. The clip at the top holds the glide on by going inside the leg.  

Swivel Glide Square tubing Leg with a  13/16" O.D. X 11/16" I.D. The base on this chair glide is 15/16" in diameter. This swivel based chair glide features a ferrule. 

Safeglides-Brown 1 1/2" Base Diameter Nail On Glide for furniture. To install the glide, tap it into your wooden furniture.

Metal Based Swivel Glide for round tubing.  9/16" O.D. X 7/16" I.D. With Ferrule. Heywood Wakefield replacement chair feet. Metal chair foot with a 1 1/4" diameter base. Metal base glides are very popular in schools and institutions and move easily across smooth or carpeted floors.  Metal base glides are nickel plated and are extremely durable, but when they do wear out, they will scratch the floor.  The glide freely swivels beyond 30 degree angle. Glide grips the inside of hollow legs with a holding clip, meaning it grabs the inside of the leg.

Recessed toilet tissue holder that is fabricated of 14 gauge type 304 stainless steel. Offers a satin finish exterior and glass blasted insterior finish. Interior diameter is 5" with 4-1/2" depth to accomodate a single standard roll of tissue tissue paper. Mounting flange is 7-1/8" (181mm) Square and features front mounting holes. Designed in mind for Behavioral Health and Detention Centers. Mounting hardware included.

Overall Dimensions:

7-1/8″ x 7-1/8″ x 4″ (181 x 181 x 102 mm)

Wall Opening: 

5-5/16″ dia. x 5″ min. depth (135 x 127 mm) 

Non-Swivel Leveler Threaded Stem Glide with metal base. Thread is 1/4-20, Base Diameter is 1 1/16" and the stem length is 1". This glide screws into a 1/4" threaded leg hole to put a selected height. Use this product to stop wobbling on an uneven floor. 

898 Mop and Broom Holder hook only. 0975 part number by American Specialties.

For handles up to 1-1/4" diameter.

Door Pull 46

12" overall
8" centers
1-1/2" x 1-1/2" base
2-3/8" projection

Finishes

Norton Door Closer Rod and Shoe

The Norton Rod and Shoe 7701-11 and 7701-11A come in two different lengths, 8-7/8" anc 12-1/2".  The length is measured from the end of the bar to the center of the eyelet.

Norton Part #'s:
8-7/8" Long  7701-11
12-1/2" Long 7701-11A

Non-Swivel Leveler Threaded Stem Glide with metal base. Thread is 5/16-18, Base Diameter is 1 1/4" and the stem length is 1". This glide screws into a 5/16" threaded leg hole to put a selected height. Use this product to stop wobbling on an uneven floor. 

Safeglides in White, 1 1/2" Base Diameter Nail On Glide for wood legs and furniture. To install the glide, tap it into your wooden furniture.

VIRCO SLED BASED GLIDES For 7/16" Sled diameter, 1-3/4" long. Clear in color. 

Marsh 1" Flag Holder for 1" map rail. Made to display your flag from a map rail. Constructed of Extruded Aluminum.