Search results for: 'goods 8 drill bar door horn'
-
Stamped SS Keeper For 1" Door, 1-7/8" Between Screws
Partition Strike And Keeper For 1" Door, 1-7/8" Between Screws, Stamped Stainless Steel
Stamped stainless steel .075" thick construction. The strike and keeper measure 2-7/8" high by 2" wide with a 1-7/8" hole spacing. The stop posts are 5/8" wide by 7/8" tall with rubber inserts. For use with 1" square edge posts. Also known as a Bathroom Stall Strike and Keeper Outswing 1". Manufacture part # 6459.
Shipped with mounting screws.
9A6459 -
Door Pull 26 1" Diameter
Door Pull 26 1" Diameter
This door handle is made of 1" round stock in either solid, aluminum, brass or stainless steel. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
1" diameter material
2-3/4" projection8" GDP810
10" GDP101
12" GDP121GHE26 -
A.W. Anderberg 301AL 4 Bar Window Hinge
A.W. Anderberg 301AL 4 Bar Window HInge, aluminum construction.
29/32" width x 5/8" stack height
Found in commercial aluminum framed hopper windows.
10" and 12" only, if you have an older larger size, please use the A.W. Anderberg 301ST or A.W. Anderberg 301SS as a replacement. You might have to shim the tracks in these cases, because the stack height is lower on the steel and stainless steel hinges. A.W. Anderberg no longer makes the larger sizes of the Aluminum Hinges due to the brittle nature of aluminum.
Sold individually, we recommend changing both hinges with you are replacing the hinge.
6-20-2012 No longer manufactured, what we have in stock, is what we have. You will have to replace with 301ST or 301SS Hinges
301AL-XX -
Interior Steel Locker Expanded Metal Lock Bar 30"
Interior Steel Equipment Locker Expanded Metal Lock bar for 30" double tier locker. Used in 1965 - 1994. Also known as 2630, is4015. This lock bar was used with a locker turn handle, the turn handle connected to the lock bar creates the bars to retract or expanding locking at the top and bottom of the locker to lock it.
EMI30 -
-
Cast SS Bottom Hinge Assembly For 7/8" Door, 1-1/4" Pilaster Sq
Toilet Partition Bottom Hinge Assembly For 7/8" Door To 1-1/4" Pilaster Square Edge Cast Stainless Steel
Cast stainless steel hinge. Hinge mounts to 1-1/4" square edge post or pilaster, for use with 7/8" thick doors. Kit includes bottom hinge, pintle, pin and insert. Also known as a Bathroom Stall Bottom Pivot Hinge Set. Manufacture part # 63013
Includes all screws.
9A3013 -
Push Bar with Offset Handle M422 x M49D
The M422 with M49D are constructed of 1-1/4 inch solid stock, with the material determined by the finish (color). The push bar has a clearance of 1-1/2 and the handle has a clearance of 1-1/2 inches. The projection is 2-3/4 on the push bar and 2-3/4 inches on the handle. The pull handle is 12 inches on center, with a 7 inch offset. The set comes with two 5/16-18 thru bolts and one 5/16 back to back conehead.
M422xM49D- -
Stamped SS Keeper For 3/4" Door, 1-7/8" Between Screws
Partition Strike And Keeper For 3/4" Door, 1-7/8" Between Screws Stamped Stainless Steel
Stamped stainless steel .075" thick construction. The strike and keeper measure 2-7/8" high by 2" wide with a 1-7/8" hole spacing. The stop posts are 5/8" wide by 7/8" tall with rubber inserts. For use with 3/4" square edge posts. Also known as a Bathroom Stall Strike and Keeper Outswing 3/4". Manufacture part # 6379.
Shipped with mounting screws.
9A6379 -
Full Mortise Two Bearing Shim Hinge
The PBB Shim Hinge is for use in Fire Doors where the doors are not square. Putting cardboard or wood shims on fire doors is prohibited, so they have come up with a solution where one of the leaves are drilled tapped and a set screw is inserted. These hinges are only available in 4.5 x 4.5 sizes in brushed chrome finish. They are sold in boxes of three hinges and come with wood and machine screws. The base metal is steel.
SHBB81 -
Cast SS Top Hinge Assembly For Sq Edge, 7/8" Door, 1-1/4" Pilaster
Toilet Partition Top Hinge Assembly For 7/8" Door To 1-1/4" Post Square Edge Cast Stainless Steel
Cast stainless steel hinge. Hinge mounts to 1-1/4" square edge post or pilaster, for use with 7/8" thick doors. Kit includes top hinges, pintle, pin and inserts. Also known as a Bathroom Stall Top Pivot Hinge Set. Manufacture part # 63023
Includes all screws.
9A3023 -
Glynn-Johnson 79 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 79 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 70 and 79 series models are constructed primarily of Brass and 300 series Stainless Steel substrates, with several components fabricated of Steel treated to resist corrosion. Models in the 70 series utilize a 1/2"-diameter stainless steel bar, while the 79 series uses a 3/4" stainless steel bar. The bar is always provided in US32D. The spring, washer and nut are provided in a clear zinc finish.
GJ790 -
WingIt Grab Bar Fastener
WingIt Grab Bar Fastener for extra strength mounting grab bars. The wingit 251-4 is designed to work for a hole 2-1/2" and 3-1/2" or deeper hollow walls with finished wall surfaces 1/4" to 1-1/2" thick. Material used is a corrosion resistant stainless steel. One require for each flange. Fasteners will support up to 300 lbs load. Also known as 251-4.
B251-4 -
Glynn-Johnson 70 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 70 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 70 and 79 series models are constructed primarily of Brass and 300 series Stainless Steel substrates, with several components fabricated of Steel treated to resist corrosion. Models in the 70 series utilize a 1/2"-diameter stainless steel bar, while the 79 series uses a 3/4" stainless steel bar. The bar is always provided in US32D. The spring, washer and nut are provided in a clear zinc finish.
GJ70
