Search results for: 'bars latch part 9001'

Gravity Door Coordinator 9"

When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
Non-handed.
Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Made of forged brass.
COR9G-26D for use on pairs of doors with astragal on active door over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" Brushed Chrome Finish.

Ives part # COR9G-26D 9" Arm Projection

Gravity Door Coordinator

When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
Non-handed.
Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Made of forged brass.
COR7G-26D for use on pairs of doors with astragal on active door up to 4' or with astragal on inactive door up to 3'4" or with astragal on both doors up to 2'10" Brushed Chrome Finish.

Ives part # COR7G-26D 7" Arm Projection

• Not load-bearing
• Maintains door alignment
• Non-ferrous base metal
• 3/4"(19mm) offset
• Furnished with wood and machine screws

Handing diagram

The Interkal Bleacher Wired Accupower Motor 1/4 Hp - 1 Phase is also known as K01151A100 or Part # P210709

Delivery of the Interkal Bleacher Wired Accupower Motor 1/4 Hp - 1 Phase we try to keep in stock at our facility for quick deliveries. The Interkal Bleacher Wired Accupower Motor 1/4 Hp 1 Phase is designed specifically for use in Interkal brand bleacher systems (Vectra bleachers), providing reliable power and performance. With a horsepower of 1/4, it is ideal for applications that require moderate lifting and lowering capabilities. The single-phase design ensures compatibility with standard electrical systems, making installation straightforward.

The Interkal Bleacher Wired Accupower Motor 1/4 Hp 1 Phase is built to last, featuring durable materials that can withstand the rigors of frequent use. Whether you are upgrading an existing bleacher system or replacing a worn-out motor, the Interkal Bleacher Wired Accupower Motor 1/4 Hp 1 Phase is a solid choice. For those looking to enhance their bleacher operations, the Interkal Bleacher Wired Accupower Motor 1/4 Hp 1 Phase offers smooth and efficient performance with 115 volts. With its robust design and user-friendly features, this motor not only simplifies the operation of your bleacher system, but also ensures safety and durability.

To maximize the benefits of your Wired Accupower Motor 1/4 Horsepower 1 Phase for Interkal bleachers (Vectra bleachers), regular maintenance is recommended. This includes checking connections, lubricating moving parts, and ensuring that the motor is free from debris. By taking these simple steps, you can extend the life of your Interkal Bleacher Wired Accupower Motor 1/4 Hp 1 Phase and maintain optimal performance.

If you have any questions about the installation process or compatibility with your current setup, feel free to reach out to our customer service team. We are here to help ensure that you get the most out of your Interkal Bleacher Wired Accupower Motor 1/4 Hp 1 Phase. If you ever need assistance, our dedicated support team is just a phone call or email away. We are committed to providing you with the best service possible, ensuring that your Wired Accupower Motor 1/4 Horsepower 1 Phase for Interkal bleachers systems operates smoothly and efficiently for years to come. The Interkal Bleacher Wired Accupower Motor 1/4 Hp 1 Phase is an excellent investment for anyone looking to enhance their seating arrangements. With its combination of reliability, efficiency, and ease of use, the Interkal Bleacher Wired Accupower Motor 1/4 Hp 1 Phase is sure to meet your needs and exceed your expectations.

The 1/4 HP Single Phase Gear Motor by Irwin is also known as Part # P6000IR.

The Irwin 1/4 HP Single Phase Gear Motor features ¼ horsepower, 115 volts, and 4 amps. It operates at a speed of 12 RPM, which is ideal for the controlled movement required in bleacher systems. This slow and steady pace ensures that the bleachers can be deployed and retracted safely, minimizing the risk of accidents or damage.

One of the standout features of the Irwin 1/4 HP Single Phase Gear Motor is its robust construction. Built to withstand frequent use, the Irwin 1/4 HP Single Phase Gear Motor is made from high-quality materials that enhance its longevity. This means less downtime for maintenance and repairs, allowing facilities to focus on their events rather than equipment issues.

Installation is simple, thanks to the Irwin 1/4 HP Single Phase Gear Motor's user-friendly design. It can be easily integrated into existing bleacher systems, making it a convenient choice for upgrades or replacements. Additionally, the Irwin 1/4 HP Single Phase Gear Motor's compact size allows it to fit into tight spaces without compromising performance.

The 1/4 HP Single Phase Gear Motor by Irwin is a fantastic choice for anyone looking to enhance their bleacher systems. With its reliable performance and durable construction, the Irwin 1/4 HP Single Phase Gear Motor stands out as a top option for schools, gyms, and auditoriums alike. Whether you are setting up for a sports event, a concert, or a community gathering, the 1/4 HP Single Phase Gear Motor by Irwin ensures that your bleachers will function smoothly and safely.

Lastly, remember that investing in quality parts—such as the Irwin 1/4 HP Single Phase Gear Motor—can significantly enhance the performance of your bleachers. The Irwin 1/4 HP Single Phase Gear Motor motor is designed for durability and efficiency, ensuring that your bleachers operate smoothly for years to come.

For any questions or assistance with your purchase of the 1/4 HP Single Phase Gear Motor by Irwin, don’t hesitate to reach out. We are here to help you make certain that your bleachers remain a safe and welcoming space for everyone.

Partition Door Piano Hinge 57", 14 Gauge SS,1/4" Pin with 20 Degree Cam Close. This hinge keeps the door open 20 degree so the user knows there is nobody in the restroom toilet stall. This is the most Heavy Duty Continuous Full Length Hinge we sell. 14 gauge (.075" thick) stainless steel construction with a 1/4" diameter hinge pin. The hinge leafs are angle cut so your door will close with the camming action. The hinge is 3" wide when laid flat, and 57" long. Screws are spaced 11" apart and the holes are 9/32" diameter and has 6 sets of holes. Hinge can be raised up 3/8" for emergency entry. Also known as a Restroom Toilet Stall Full Length Continuous Hinge. Manufacturer part #650-9401 and 160039. The hinges must be mounted flat when door is shut. For inside swing the hinges are mounted on the inside of the stall. For the outside they must be mounted on the outside.

Stainless Steel Partition Support Brace U Shape, Cut Adjustable Height. Constructed of 13 Gauge Stainless Steel with Satin finish. Used to support/brace the bottom of partitions and is mounted to the restroom floor. Designed to work with partition panels or pilasters to create stability. Available for material thickness of 3/4", 7/8", 1" and 1-1/4". These partitions support braces are field adjustable by cutting the tube. Ships as standard size 12-1/2" (Max Size) and can be cut down to as small as 3"(Min Size) to create floor clearance. Features a press fit bushing to set the height for the support brace. Ships with fastners. Should you have any questions about this item please let us know. Known as part numbers 135009, 135019, 135029 and 135039.

Notes

• Only Available in U Shape Design
• Field Cut Adjustable: Ships at 12-1/2"(Max) and cuttable down to 3"(Min.)
• Thickness Available Sizes: 3/4", 7/8", 1" and 1-1/4"

SLIMdri hand dryer’s uses up to 70-80 % less energy and up to 40% faster dry time than competitive surface mounted ADA dryers. Its compact and low-profile design makes this an ideal dryer for small and limited space areas. White Cover is made of Cast Aluminum and Brushed is made from Stainless Steel. Known as World Dryers part numbers L-973A and L-974A.

• Finish: White and Brushed Stainless Steel
• Universal Voltage: Uses smart technology to adapt to almost any facilities voltage. Voltage extends from 110-240v(Min. 15 Amp Recommended).
• ADA Complaint, designed to protrudes less than 4” away from wall ensuring walkway and pathway clearance.
• Touchless operation offers a More Hygienic Experience
• Utilizes Anti-microbial technology on treated surfaces to protect from bacteria, mold and fungus growth that can cause staining, odors and product deterioration.
• On/Off Heat Switch
• Auto Infrared Sensor 3 second run-on time and 60 second vandal shut-off.
• Unit Size: 10-11/16”x12.25”x3.9”
• Durable and Vandal Resistant
• 10 yr Limited Warranty, 5 yr Motor and Sensor

Door Finger Protector - Interior Push Side

These patented door guards fold against the jamb, allowing them to swing completely 180 degrees. The guard is attached to the face of the door and frame with the provided strong adhesive tape. Clear-frosted color to compliment any color scheme. Finger-Gard for use on Interior Doors, on the push side. Available in 54" or 78" lengths

Hadrain Partitions 8" wrap door kit for Solid Plastic material. Comes in anodized aluminum finish and are desgned for 1" thick material only. You will need to choose In or Out swing when ordering. Can be used as right or left hand as hinges are field reversible. To hand handing, this can be done by taking the 3 pieces apart and reconfiguring the opposite swing. See Hadrians part numbers/ known as numbers listed below. Also used with Comtec-Hiny Hiders-Scranton.

Inswing: 261005 and 261025

Outswing: 621006 and 261026

The Global Door Closer TC200 is recommended for use on all aluminum store front doors, wood or hollow metal commercial applications. It is a versatile utility closer that provides narrow styling and has a full selection of accessories to accomodate the requirement of any field installation.

In this series, our Global Door Closer TC201 is a multi-size spring model that offers adjustable power with a choice of range sizes 2-5 where high rates of closing force are required. Our TC201ADA model also offers adjustable spring power sizes 1-4 for use on interior doors requireing less than 5 lbs. of opening force and exterior doors requiring less than 8.5 lbs. This complies with ADA handicap codes and ANSI/BHMA standard requirements. Both models will retrofit most full size closers with a 9 1/16" industry standard hole patten to update any opening for code compliance.
Hole Spacing is 3/4" x 9-1/16"

Options: Specify when ordering:

• Finish - AL, DU
• Size 1-4 or 3-6

VMAX V2 hand dryer’s offer cutting edge technology, aesthetic appeal and HEPA Filtration for restroom facilities. Designed so users can place handing into drying cavity unlike traditional hand dryers that require users to place hand under dryer. Features maintenance alerts for when filter needs to be changed and when water reservoir needs emptied. High performance brushless motors allow for quiet operations and average 10-12 second hand dryer times. Known as World Dryers part number V-649A.

• ABS Plastic Silver Finish
• Voltage: 110-120v(Min. 15 AMP Recommended)
• Brushless DC Motor
• HEPA Filter, Captures 99.97% of particles, 0.3 or larger
• Intelligent LED Indicator Display, Signals when filter needs changing and when water reservoir needs to be emptied.
• 10-12 Second Dry time, Automatic Operation Infrared Sensor
• Quiet Operating, Low Sound Level
• ADA Complaint suitable for walkways and pathways
• Wider hand dryer cavity opening creates a comfortable user experience without touching sides of dryer.
• Utilizes Antimicrobial technology on treated surfaces to protect from bacteria, mold and fungus growth that can cause staining, odors and product deterioration.
• Touchless operation offers a More Hygienic Experience
• Features dedicated reservoir to collect residual water from drying hands. Designed to help prevent water build up and damage to unit and prevent wet floor hazards.
• Unit Size: 13’x26.25”x9.25”
• Replacement HEPA Filter with Odor Neutralizing Tablet Available (93-10385)
• 5 yr Limited Warranty

VERDEdri hand dryer’s are HEPA-Filtered and uses high performance motors last about 3 times longer than competing model. Manufactured to provide 30% quieter sound levels and is optimized to use only 3.16 watt-hr per use(277 VAC use 3.83 watts-hrs per use). Roughly costing the user 32 cents for every 1,000 cycles. Covers for the White, Black and Graphite finish are made from Cast Aluminum and Polished and Brushed are made from Stainless Steel. Known as World Dryers part numbers Q-162A2, Q-962A2, Q-972A2, Q-973A2 and Q-974A2.

• Finish: Black, Graphite Textured, White, Brushed Stainless Steel, Polished Stainless Steel
• Universal Voltage: Uses smart technology to adapt to almost any facilities voltage. Voltage extends from 110-277v(Min. 15 Amp Recommended).
• ADA Complaint, designed to protrudes less than 4” away from wall ensuring walkway and pathway clearance.
• HEPA Filter, Captures 99.97% of particles, 0.3 or larger
• Touchless operation offers a More Hygienic Experience
• Utilizes Anti-microbial technology on treated surfaces to protect from bacteria, mold and fungus growth that can cause staining, odors and product deterioration.
• Features sounds control between three mode settings, to accommodate sensitive spaces.
• Automatic Infrared Sensor, can dry hands in as little as 12 Second Dry Time, 45 second vandal shut-off/lock out feature.
• Unit Size: 14.5”x12.25”x3.9”
• Sound Level: 69 DBA
• Durable and Vandal Resistant
• Replacement HEPA Filter Available (93-10292K)
• Optional: Top Entry Adaptor Kit (17-10504K)
• 10 yr Limited Warranty, 7 yr Motor and Sensor

Hand Dryer designed for Behavioral Health appliactions with Anti-Ligature features, angles top, welded corners, single tube exhaust prevent looping, tying off and prying. 18 Gauge Tamper-Resistant Stainless Steel cover and flush pin-hex security screws. Designed for Behavioral Health and Detention Centers. 

Voltage Options

MH-1 (115-120V)

MH-2 (208-240V)

Accurate partitions urinal privacy wall mounted steel material are great for between two urinals, between a urinal and sink or a privacy for the entrance of the restroom. All toilet partitions ship in 48-72 hours plus 2-4 days travel. Wall hung 1" thick by 42" , 48" and 58" high panel. Available in the following widths  18, 22, 24, 28 widths. Specify part # 9SWHS-XX (where XX is the screen width) x 42", 48", 58"ht screen. Two Standard Chrome Plated Brackets included.

Accurate Steel Color Chart

Accurate Steel Instructions

The Electronic Touchless Bulk/Cartridge Soap Dispenser in white, consistently dispenses one (1-1.5ml) drop at a time. The unit operates on 3 "C" batteries for up to 80,000 cycles. The refillable reservoir may be used with quality bulk liquid soaps. The mechanism is a separate piece to prevent damage from the soap.

Hadrian Headrail Retrun Kit is designed to work with Hadrians Metal Stall Partitions. The headrail retun kit will work with 1-1/4" thickness headrails from Hadrian. Designed to work with powder coated steel and stainless steel stalls. This kit includes Brackets,Wall Anchoring Screws, Plastic Anchors, Fastening Screws and Headrail End Cap. Can be used to run across the top of partitions either between two wall or runnning from a rear wall to a pilaster. Often used in conjuction with Hadrian Headrail (60")9HR60A, (74")9HR74A and (96")9HR96A.

Manufacturer Part# 607200.

Ordering Online All Powder Coated Metal 10' Post & Panel Urinal Screen Manufactured by Global Partitions, see color chart below. For other factory colors please call for pricing. All toilet partition's ship in 48-72 hours plus 2-4 days travel. 10' Post/Panel Urinal Screen 1-3/4" square post up to 120" maximum with 58" high panel. Specify - and Part # 9SFCS-XX (where XX is width from the front of post to the wall). Width of screen 16"-76" x 58"ht, All standard chrome plated hardware included.
Color Chart

The Aluminum Bleacher End Cap is also known as Part #P7002N.

Note: We offer 7½" (P7002na), 9½" (P7002nb), and 11½" (P7002nc) width for Aluminum Bleacher End Caps. They are 1¾" thick and feature 2 bends of 1⅛" & ⁹⁄₁₆". The Aluminum Bleacher End Cap includes self taping screws. Please select the appropriate size from the dropdown menu below.

This aesthetically-pleasing Aluminum Bleacher End Cap is designed to provide a clean and finished look to your aluminum bleacher system. Made from high-quality materials, these Aluminum Bleacher Ends ensure longevity and resistance to wear and tear, making them an ideal choice for schools, sports facilities, and outdoor events.

The Aluminum Bleacher End Cap is easy to install, fitting securely onto the ends of your bleacher rows. Its sleek design not only enhances the overall appearance of your seating but also helps to prevent debris from entering the bleacher structure, maintaining a tidy environment.
Whether you're upgrading existing bleachers or installing new ones, the P7002N End Cap is a reliable solution that combines functionality with aesthetic appeal.

Consider implementing a cleaning and maintenance schedule to keep your bleachers looking their best. A clean and well-maintained environment not only enhances the aesthetic appeal but also contributes to the longevity of the materials. Simple tasks like wiping down surfaces and removing debris from the Aluminum Bleacher End Caps can make a significant difference. Whether it's comfort, accessibility, or safety concerns, replacing worn-out Aluminum Bleacher End Caps with new ones can help you prepare for future upgrades or changes involving your bleacher systems. By prioritizing maintenance, safety, and user experience by installing new Aluminum Bleacher Ends, you can ensure that your bleacher system remains a dependable and welcoming space for all events.

Please feel free to contact us for assistance with ordering the correct replacement Aluminum Bleacher End Caps for your specific needs. We are always glad to help you choose the best options for your bleacher systems. Order yours today!

Truth Entrygard Dual Arm Operator. We would expect you to find 20810 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Also known as a TH-23076 or TH-23077.

4-7/16" link dimension, offset up. For offset down, order Wi1561.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

MOST POPULAR SIZE

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

PART # HAND
WI1510R RIGHT HAND
WI1510L LEFT HAND

Truth Entrygard Dual Arm Operator

The Irwin Bleacher Drive Wheel is also known as Part # P5000IR.

The wheel is used with the Irwin & Folding Bleacher 6" Diameter x 9½" Wide x ¾" Axle with a keyway. The axle is 15⅛" long. Select one or two 20-tooth, 15-tooth, or 16-tooth sprockets.

The Irwin Bleacher Drive Wheel is durable and efficient, making it an essential component for any bleacher system. With its robust construction, the Drive Wheel for Irwin Bleachers ensures smooth operation and reliable performance, whether in a gymnasium or outdoor setting. Installation is a breeze, and with just a few simple tools, you can have your bleachers ready for action in no time. The 6" diameter and 9½" width provide stability, while the ¾" axle with a keyway ensures a secure fit. The Irwin Bleacher Drive Wheel’s design minimizes wear and tear, extending the lifespan of your bleacher system.

For maintenance, it's recommended to regularly check the Irwin Bleacher Drive Wheels for any signs of damage or wear. Keeping the Irwin Bleacher Drive Wheel clean and lubricated will help maintain optimal performance. If you need to replace a wheel, we offer the Irwin Bleacher Drive Wheel so that you can keep your bleachers in top condition. Whether you're managing a sports facility, school, or event venue, investing in quality components like the Drive Wheel for Irwin Bleachers will enhance the safety and functionality of your seating arrangements.

We recommend keeping a few spare Irwin Bleacher Drive Wheels on hand to minimize downtime in case of unexpected wear or damage. Regular maintenance checks should also include inspecting the bleacher structure itself. Look for any loose bolts, rust, or signs of structural weakness. Addressing these issues promptly can prevent larger problems down the line and provide safety for your patrons.

For questions about ordering the Irwin Bleacher Drive Wheel, feel free to reach out to our customer service team. We are always ready to assist you with any inquiries you may have regarding the Drive Wheel for Irwin Bleachers, from product specifications to shipping options.

The Interkal Bleacher Drive Wheel is also known as 216008 or Part # P2000VI.

The Interkal Drive Wheel for Bleachers is also compatible with Vectra bleachers. With a 6" diameter x 2-7/16" width x 1" axle, it is set to suit your specific bleacher needs. The Interkal Bleacher Drive Wheel comes with a key ring for your convenience, making maintenance and replacement easy. The wheel is designed to offer durability and efficiency. Interkal Bleacher Drive Wheels are ideal for moving bleachers smoothly and safely, making them perfect for sporting events, school activities and other gatherings.

The Interkal Drive Wheel for Bleachers is made from high-quality materials that resist wear and tear, ensuring it will last through many seasons of use. Its smooth rolling action minimizes strain on the bleachers, helping to preserve its structure over time. With a robust construction, Interkal Bleacher Drive Wheels can handle heavy loads while still being easy to install. The 6" diameter ensures they perform well on a variety of surfaces, and the 1" axle allows them to be easily attached to your existing bleachers. This makes it possible to spend less time maintaining your bleachers and more time enjoying the events you host! Plus, the compact size of Interkal Bleacher Drive Wheels means they won’t take up much space when not in use, making storage easy and convenient. Whether you are a school, sports club or event organizer, the Interkal Bleacher Drive Wheel offers the reliability and functionality you need.

Don’t let cumbersome bleachers hold you back from hosting successful events. Replace or install the Interkal Bleacher Drive Wheel today and experience the difference in mobility and safety. For special inquiries regarding the Interkal Drive Wheel for Bleachers, our customer service team is ready to assist you. Make your next event a breeze with Interkal Bleacher Drive Wheels!

The Hussey Bleacher Power Trac III & IV Drive Wheel is also known as 1033936 or Part # P2003HS.

The Drive Wheels Power Trac III & IV by Hussey Bleacher are 4" x 6" x 7/8". Your order from our website will include the wheel push ring.

The Hussey Bleacher Drive Wheels Power Trac III & IV are designed specifically for use with Hussey Bleacher systems, ensuring smooth and efficient operation. Made from durable materials, the Hussey Bleacher Power Trac III & IV Drive Wheel provide reliable performance and longevity, making them an essential component for maintaining your bleacher setup.

The dimensions of 4" x 6" x 7/8" make the Hussey Bleacher Power Trac III & IV Drive Wheel suitable for various applications and allow for easy maneuverability and stability. The included wheel push ring enhances functionality, ensuring that the Hussey Bleacher Power Trac III & IV Drive Wheels stay securely in place during use. Moreover, the wheels are designed with safety in mind. The secure fit provided by the wheel push ring minimizes the risk of accidents, allowing users to operate the bleachers with confidence.

Whether you are replacing old wheels or upgrading your current system, the Hussey Bleacher Drive Wheels Power Trac III & IV are a smart choice. They are easy to install and compatible with a range of bleacher models, making them a versatile option for schools, sports facilities, and event venues. Installation is straightforward, with clear instructions included to guide you through the process. Even those with minimal technical skills can easily replace or upgrade their Hussey Bleacher Power Trac III & IV Drive Wheel, making it a hassle-free experience.

Don't let worn-out wheels hold you back. Upgrade to the Hussey Bleacher Drive Wheels Power Trac III & IV today and enjoy the peace of mind that comes with reputable performance. For any questions or assistance, feel free to reach out through the contact information provided on our website. Your bleachers deserve the best, and with the Drive Wheels Power Trac III & IV by Hussey Bleacher, you can be certain they are always ready to serve your needs.

For more information, visit the link provided. Your bleachers are always ready for action with the trusty Hussey Bleacher Power Trac III & IV Drive Wheel!

https://www.rbahelp.com/tag/melting-bleacher-drive-wheel/

Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748.  Call or email for quantity "Discount Codes".

2-7/8" linkage dimension, off set up.

Order Wi1516 if your link dimension is 3-3/4" stamped 20755.
Order Wi1510 if your link dimension is 4-7/16" stamped 20810.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

Left hand shown.

Part # Hand
WI1515R Right Hand
WI1515L Left Hand

Truth Entrygard Casement Operator

The Interkal Bleacher Gearmotor 1/2 Hp 3 Phase is also known as 652545, 652589-01 or k01151c600, or New Part # 652617-01c/187245

This Gear Motor 1/2 Hp for Interkal Bleachers (Vectra Bleachers) is a common motor used with this brand’s bleacher systems and is usually in stock for quick delivery. The Interkal Bleacher Gearmotor 1/2 Hp 3 Phase is designed for use in various applications, particularly in powering bleachers and other seating systems. With its powerfully built structure and efficient performance, the Interkal Bleacher Gearmotor 1/2 Hp 3 Phase ensures smooth operation and longevity. Standout features include:

• 208 to 230 volts
• 12 RPM
• Outstanding durability that protects against wear and tear
• Its compatibility with various Interkal bleacher systems makes it a versatile option for schools, sports facilities, and event venues.
  
  

Overall, the Interkal Bleacher Gearmotor 1/2 Hp 3 Phase stands out as a reliable and efficient solution for managing bleacher systems, enhancing the experience for spectators. Whether for a school gymnasium, a sports arena, or an outdoor event space, the Interkal Bleacher Gearmotor 1/2 Hp 3 Phase is a dependable choice that meets the demands of modern seating solutions. For optimal performance of the Interkal Bleacher Gearmotor 1/2 Hp 3 Phase, regular maintenance is recommended, including checking electrical connections and ensuring the motor is free from debris.

Customer support is readily available to assist with troubleshooting and repairs, ensuring that facilities can maintain their operations smoothly and providing peace of mind for buyers. Investing in the Interkal Bleacher Gearmotor 1/2 Hp 3 Phase means investing in quality and efficiency. Whether you are upgrading an existing system or installing new bleachers, this Gear Motor 1/2 Hp for Interkal Bleachers (Vectra Bleachers) is sure to meet your needs and exceed your expectations. Don’t miss out on the opportunity to enhance your facility’s capabilities—order your Interkal Bleacher Gearmotor 1/2 Hp 3 Phase today and experience the difference!

Ives Floor Mounted Door Holder FS40

This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

Door to Floor Clearance 1/2" or less
Holder Dimensions 3" Wide x 3-11/16" High

Truth Entrygard Dual Arm Operator. We would expect you to find 20755 on the linkage arm, which measures 3-3/4" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20755.  Call or email for quantity "Discount Codes".

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

3-3/4" link dimension, offset up. For offset down order Wi1520

Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
Order Wi1515 if your link dimension is 2-7/8" stamped 20748.

Left hand shown.

PART # HAND
WI1516R RIGHT HAND
WI1516L LEFT HAND

Truth Entrygard Dual Arm Operator