Search results for: 'holder boot bottom 304'
-
Cast SS Bottom Hinge Assembly For 1" Door, 1-1/4" Pilaster Sq Edge
Toilet Partition Bottom Hinge Assembly For 1" Door, 1-1/4" Pilaster Square Edge Cast Stainless Steel
Cast stainless steel construction. Set includes bottom hinge, pin and door insert. Also known as a Bathroom Toilet Stall Bottom Hinge Kit. Manufacture part #63033.
Shipped with mounting screws.
9A3033 -
Von Duprin 8827-F Bottom Latch Kit
Von Duprin 8827-F Bottom Latch Kit 050463
This is the Bottom Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Durpin Part # 050463
Old Part # 10268188VR170F -
Bobrick Angle Frame Tilt Mirror 18x30
Bobrick Angle Frame Tilt Mirror, series B-294 18x30 two position tilt mirror. This mirror is Ada approved for commercial restrooms. The outside channel is 3/4"x3/4" and is type 304 stainless steel frame. This mirror has a 7" from top wall and the bottom is mounted to wall. Standard 1/4" plate glass is used.
B294-18x30 -
Floor Mounted Door Holder/Stop 536
Material: Cast Brass or Bronze with Black Bumper Size: 2-1/2" diameter Base x 3-7/8" High Finishes: US4 brushed brass
US10B dark bronze
US26 polished chrome
US26D brushed chrome
US3 polished brassANSI: L01371 Standard Fasteners: (1) lead anchor
(2) #10 × 1" SMS
(1) #10 × 1" SMS with plastic anchor
(1) 5/16-18 × 2-1/2" stud
(1) 5/16-18 × 2-1/2" hanger boltGJ536- -
Cast SS Bottom Hinge Assembly For 7/8" Door, 1-1/4" Pilaster Sq
Toilet Partition Bottom Hinge Assembly For 7/8" Door To 1-1/4" Pilaster Square Edge Cast Stainless Steel
Cast stainless steel hinge. Hinge mounts to 1-1/4" square edge post or pilaster, for use with 7/8" thick doors. Kit includes bottom hinge, pintle, pin and insert. Also known as a Bathroom Stall Bottom Pivot Hinge Set. Manufacture part # 63013
Includes all screws.
9A3013 -
Cast SS Top & Bottom Hinge Assembly For 1" Door To 1" Post Sq Edge
Toilet Partition Top & Bottom Hinge Assembly For 1" Door To 1" Post Square Edge Cast Stainless Steel
Cast stainless steel hinge. Hinge mounts to 1" square edge post or pilaster, for use with 1" thick doors. Kit includes top and bottom hinges, pintle, pin and inserts. Also known as a Bathroom Stall Pivot Hinge Set. Manufacture part # 63153
Includes all screws.
9A3153 -
General Bottom Hinge For 1-1/4" Sq Edge
General Toilet Partition Bottom Hinge For 1-1/4" Sq Edge Pilaster Or Post Chrome Plated
Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a General Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3290
Shipped with mounting screws.
a=1-5/8"
91000P -
American Sanitary Bottom hinge Insert For 1 Door
American Sanitary Partition Bottom hinge Insert For 1" Door
Chrome plated Zamac die casting. The door insert outside measurements are 2-5/16" wide by 1-5/32" deep by 1-3/16" tall. The inside dimensions are 1" and the hex hole measures 3/4". The round hole measures 5/16". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 2490
9AM240 -
Metpar Bottom Door Insert For 7/8" Door
Metpar Partitions Bottom Door Insert For 7/8" Door
Chrome plated Zamac die cast construction. The door insert measures 2-5/16" wide by 1" wide by 1-3/16" high. The hex shaped hole is 5/8" and the round hole is 7/32" diameter. The material or rim is 5/16" high. Also known as a Bathroom Stall Door Insert Bottom 7/8". Manufacture part # 1530.
9CP325. -
Knickerbocker Bottom Hinge 1-1/4 Round Edge
Knickerbocker Partitions Bottom Hinge 1-1/4" Round Edge
Chrome plated Zamac die cast construction. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" to center hole with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3420.
a=1-11/16"
9K0230 -
Ampco Bottom Hinge
Chrome plated Zamac die cast construction. The hinge U channel measures 2-1/4" high by 1-1/4" deep with an insert depth of 1-5/16". The hole spacing is 1-1/2" on center. The hinge lug projects out 1-11/16" by 1/2" thick with a hole diameter of 5/16". Also known as a AMPCO Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3130.
Shipped with mounting screws.
a=1-11/16"
9F0214N -
General Bottom Hinge 1-1/4" Round Edge
General Partitions Bottom Hinge 1-1/4" Round Edge Post
Chrome plated Zamac die cast construction. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010.
Shipped with mounting screws.
A=1-7/6"
91000B -
Flush Metal Partitions Bottom Door Insert For 7/8" Door
Flush Metal Partitions Bottom Door Insert For 7/8" Door
Chrome plated Zamac die cast construction. The door insert measures 2-5/16" wide by 1" wide by 1-3/16" high. The hex shaped hole is 5/8" and the round hole is 7/32" diameter. The material or rim is 5/16" high. Also known as a Bathroom Stall Door Insert Bottom 7/8". Manufacture part # 1530.
9FL775 -
Bottom Hinge For 1-1/4 Round Edge
Bottom Partition Hinge For 1-1/4" Round Edge Post Or Pilaster
Chrome plated Zamac die cast construction. The hinge measures 1-1/4" deep by 2-1/8" high by 1-7/16" wide. The U part of the hinge measures 2-1/8" high by 1-1/4" deep with a slot depth of 11/16". The hole spacing is 1-1/2". The lug projects out 1-3/32" and is 1/2" thick with a 5/16" diameter hole. Also known as a Bathrrom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 4040. Used on Ampco and Metpar Metal Partitions.
Shipped with mounting screws.
A=1-7/16"
9C3004 -
Accurate Top and Bottom Hinge
Accurate Partitions Top and Bottom Hinge for 1-1/4" Round Post
chrome plated
used on Accurate Metal Partitions for mounting on a 1-1/4" thick round edge pilaster.
Accurate part number 50-8517300 and 50-2517200 and 50-398660. Security screws included.
A= 1-1/2", Used prior to January 1st 2013. There is no exact replacement hinge that will work.
**Not Available anymore, see link for new doors
9HAH15 -
Ampco Bottom Door Insert For 7/8" Door
Chrome plated Zamac die cast construction. The door insert measures 2-5/16" wide by 1" wide by 1-3/16" high. The hex shaped hole is 5/8" and the round hole is 7/32" diameter. The material or rim is 5/16" high. Also known as a Bathroom Stall Door Insert Bottom 7/8". Manufacture part # 1530.
9CP325 -
Cast Stainless Steel Bottom Hinge for 1-1/4" Sq Edge
Cast Stainless Steel Bottom Hinge for 1-1/4" Sq Edge
Cast stainless steel construction. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a General Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3293.
Shipped with mounting screws.
a=1-5/8"
This is a replacement for the Zamac Die Cast hinges for General, American Sanitary, Flush Metal and Fiat Partitions.
9A3293 -
Global Bottom Hinge for Flat Surface Mount
Global Partitions Bottom Hinge For Surface Mount. Chrome plated Zamac die cast construction. Used with powder coated steel and stainless steel partition doors. Pivot hinge is 2-3/16" tall by 1-1/2" wide. The hole spacing is 1-1/2" on center. The lug projects out 1-9/16" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Manufacture part # 3010, 111710. Also used with Flush Metal and General Partitions. Shipped with mounting screws. A=1-9/16". Also used with Accurate Partition doors after January 2013.
9G0201 -
ASI Security Grab Bar, Front Mount
Security Front Mount Grab Bar fabricated with 18 gauge, 1-1/2" diameter tubing and flanges are 1/8" (3mm) thick stainless steel type 304 satin finish. The Closure Plate is 1/8" (3mm) thick and is welded the the bottom side of the grab bar. Closure plate is constructed of 12 gauge stainless steel. Unit has 3 holes on each flange for exposed mounting. Each flange is " in diameter Special Closure Plate is designed for Security and Anti-Ligature applications. Designed in mind for Behavioral Health and Detention Centers.
A10D -
Generic 8 inch Bottom Hinge Repair Kit, Plastic Rod
Generic Plastic Rod Fits most manufactures like Global, Hadrian, Accurate Toilet Partitions. Also known as a Bathroom Stall 8" Bottom Repair Kit. These might not fit exactly. Shave off two sides to make smaller. The configuration is the same for all manufactures, some just a little wider in the diameter. Manufacture part # 8465
9HHGB-BOTTOM -
ASI Matte Black Stainless Steel Mirror Inter-Lok Frame Angle
ASI Matte Black inter-lok frame angle frame mirror is constructed of 3/4"x5/8 roll formed 18 gauge 304 type stainless steel. Product offers welded corners, one piece back plate attached to the frame with theft resistant locking device and concealed hanging brackets that locks to the top and bottom of frame. The product is stainless steel with a matte black powder coated finish. With a matte black finish this product offers a more sophisticated and bold look while being aesthetically appealing to the eye.
B10-0600 -
Bobrick Fixed Position Tilt Mirror
Bobrick fixed position tilt mirrors known as B-293 series. These mirrors are ADA approved and are required for commercial restrooms that provide handicap accessibility. The frame is type 304 stainless steel with beveled edges of the frame hug the mirror. This provides a gapless fit for improved appearance and safety when cleaning. The product is a plate glass. The mirror extends 4" from the wall at the top and tapers down to 1" at the bottom.
B293 -
Stainless Steel Fixed Tilt ADA Mirrors
Introducing American Specialties Fixed Ada Tilt Mirrors. Constructed of plate glass and type 304 stainless steel. Frames are roll formed to make the 1/2” x 1/2” x 1/2” channel, the corners are then mitered and secured with stainless steel rivets, with a #4 satin finish. 15 Year warranty against silver spoilage. The mirror taper from 4" at the top to 1" at the bottom. 4 keyhole slots in back of mirror unit connect to the screws on the wall. Also known as 0535 series mirrors.
9A53 -
Emco U Wall Rack
Emco U Wall Rack
This utility shelf will solve your need for additional storage above an existing shelf or in a storage room by itself. Perfect for the lower grade classrooms at just above floor level for storage of boots and other items.
Height: 12" (305mm)
Length: 2' to 50'+
Projection: 11 1/2" (292mm)
Slat Color Options:
Bronze Extruded Aluminum, Satin (Silver) Aluminum,
Light Oak, Medium Oak, Unfinished Oak, WalnutPlease Call 1-800-642-2403 for the Wood Grain Slat Pricing
EM-U-XX -
ASI Security Grab Bar, Chase Mount
Security Chase Mount Grab Bar fabricated with 18 gauge, 1-1/2" diameter tubing and flanges are 1/8" (3mm) thick stainless steel type 304 satin finish. The Closure Plate is 1/8" (3mm) thick and is welded the the bottom side of the grab bar. Closure plate is constructed of 12 gauge stainless steel. Unit has 3 rods welded to the back of the flange for wall mounting. Each flange is " in diameter Special Closure Plate is designed for Security and Anti-Ligature applications. Designed in mind for Behavioral Health and Detention Centers.
*** DISCOUNTINUED SIZES 36", 42" AND 48" IN 2024-25 ***
A10E -
Global Bottom Hinge for Flat Surface Mount Stainless Steel
Global Partitions Bottom Hinge For Surface Mount. Stainless Steel die cast construction. Used with powder coated steel and stainless steel partition doors. Pivot hinge is 2-3/16" tall by 1-1/2" wide. The hole spacing is 1-1/2" on center. The lug projects out 1-9/16" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Manufacture part # 3010, 111710, 111713. Also used with Flush Metal and General Partitions. Shipped with mounting screws. A=1-9/16". Also used with Accurate Partition doors after January 2013.
9G0204
