Search results for: 'holder boot bottom 304'
-
LCN SEM7830 Magnetic Door Holder
LCN SEM7830 Magnetic Door Holder
LCN SEM7830 features a die cast metal housing that is surface wall mounted. Tri-voltage design works with 12, 24 or 120 volts, with 35 lbs. of holding force. The magnet housing measures 2-13/16" wide by 4-5/8" high. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 1-5/8". The total projection of both pieces is 4-1/8". Available in an aluminum or dark bronze color.
LCN Part # SEM7830
Armature extensions are available, along with replacement covers, magnets, and armatures.
SEM7830- -
LCN SEM 7850-828 Armature for Magnetic Door Holder
LCN SEM7850-828 Armature for Magnetic Door Holder
LCN SEM7850-828 features a metal die cast construction armature. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 2-5/8". Available in an aluminum or dark bronze color.
LCN Part # SEM7850-828
Armature extensions are available, along with replacement covers, magnets, and armatures.
SEM7850-828- -
LCN SEM7840 Magnetic Door Holder
LCN SEM7840 Magnetic Door Holder
LCN SEM7840 features a metal die cast housing that is surface wall mounted. Tri-voltage design works with 12, 24 or 120 volts, with 35 lbs. of holding force. The magnet housing measures 2-13/16" wide by 4-5/8" high. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 1-5/8". The total projection of both pieces is 2-5/8". Available in an aluminum or dark bronze color.
LCN Part # SEM7840
Armature extensions are available, along with replacement covers, magnets, and armatures.
Outlet box not included
SEM7840- -
Glynn-Johnson 79 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 79 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 70 and 79 series models are constructed primarily of Brass and 300 series Stainless Steel substrates, with several components fabricated of Steel treated to resist corrosion. Models in the 70 series utilize a 1/2"-diameter stainless steel bar, while the 79 series uses a 3/4" stainless steel bar. The bar is always provided in US32D. The spring, washer and nut are provided in a clear zinc finish.
GJ790 -
Wall Mounted Holder/Stop 531
Material: Cast Brass or Bronze with Black Bumper Size: 2-1/2" diameter Base x 3-5/8" Projection Finishes: US26 polished chrome
US26D brushed chrome
US3 polished brass
US4 brushed brass
US10B dark bronzeANSI: L02021 Standard Fasteners: (1) 5/16-18 × 2-1/2" stud
(2) #10 OH SMS
(1) #10 × 1" OH SMS with plastic anchor
(1) lead anchor
(1) 5/16-18 × 2-1/2" hanger boltGJ531- -
Glynn-Johnson 70 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 70 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 70 and 79 series models are constructed primarily of Brass and 300 series Stainless Steel substrates, with several components fabricated of Steel treated to resist corrosion. Models in the 70 series utilize a 1/2"-diameter stainless steel bar, while the 79 series uses a 3/4" stainless steel bar. The bar is always provided in US32D. The spring, washer and nut are provided in a clear zinc finish.
GJ70 -
Fiat Bottom Door Insert
Fiat Partitions Bottom Door Insert For 1" Doors
Chrome plated Zamac die cast construction. The bottom door insert measures 2-1/8" by 1" by 13/16". The insert has one hole, which is 7/32" diameter. The square hole is 29/32" wide by 1". Also known as a Fiat Bathroom Stall Door Insert Bottom 1". Manufacture part # 4700.
9F0317 -
Doromatic Exit Device 1690/1990 Bottom Rod
Dor-o-Matic 1690/1990 bottom rod. Connects panic bar to the bottom latch
Doromatic Part # 4270101825 PB25 and GPB25
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199024B -
Chrome Plated Bottom Hinge Assembly For 1" Door, 1-1/4" Pilaster Sq
Toilet Partition Bottom Hinge Assembly Chrome Plated For 1" Thick Door, 1-1/4" Pilaster Square Edge
Polished chrome plated zamac die cast construction. Kit includes Bottom Hinge, Pintle, Nylon Cam, and Bottom Hinge Door Insert. Bottom hinge measures 2-1/4" high by 1-1/4" wide with screw spacing of 1-1/2". Mounting lug projects out 1-1/4". Also known as a Bathroom Stall Bottom Hinge Kit. Manufacture part number 63710.
Screws are also included.
9A3710 -
Bobrick Bottom Door Insert
Bobrick Partition Bottom Door Insert For 1" Door
Chrome plated Zamac die casting. The door insert outside measurements are 2-5/16" wide by 1-5/32" deep by 1-3/16" tall. The inside dimensions are 1" and the hex hole measures 3/4". The round hole measures 5/16". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 2490
9AM240. -
Falcon Monarch Bottom Bolt Guide Assembly
Falcon Monarch Bottom Bolt Guide Assembly
The Falcon Monarch Bottom Bolt Guide Assembly 650387 is used the 19-V, 24-V, 25-V and the XX-V Bottom Rod. The Guide Assembly measures 1-7/8" tall by 1" wide and projects 1-9/16" at the widest projection. The Bottom Bolt Guide is made of zinc plated steel.
Falcon Monarch Part # 650387
G650387 -
5" Kickdown Door Holder / Stop Grand Standard
5" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steel or Brass platedmade by Grand Specialties 605z 605b
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
GJ605- -
Bobrick Bottom Hinge
Bobrick Partitions Bottom Hinge For 1" Square Edge Post Or Pilaster
Chrome plated Zamac die cast construction. The hinge mounting U channel measures 2-1/8" high by 1" deep with an insert depth of 1". The hole spacing is 1-1/2" on centers. The hinge lug projects out 1-9/16" by 1/2" thick with a 5/16" diameter hole. Also known as a Bobrick Bathroom Stall Pivot Hinge - Bottom 1". Manufacture part # 3260, 650-8843.
Ships with mounting screws.
9BR843 -
Von Duprin Exit Device 2227 Bottom Latch 050090
Von Duprin 2227 Bottom latch.
Replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.
Includes screws and bracket
Von Duprin Part # 050090
G22VR120





































