Doors
-
Command Access MLRK1-JAC12 Motorized Latch Retraction for Jackson CRL 1200
The Command Access MLRK1-JAC12 Motorized Latch Retraction Kit With REX is for use on the Jackson CRL 1285 and 1295 Series Exit Devices. The unit is 24 volt with Standard : 900 mA (Avg Current Peak); 200 mA (Avg Current Hold). The unit requires 18 ga wires. The package includes: 1) Motor Mount with MM5; (1) 50944 Molex Pigtail; (1) 50030 6 Feet Lead with VD Connector; (2) 40124 10-24 x 3/8inch Phillips Screws (Silver); (2) 40125 10-24 x 3/8inch Phillips Screws (Black).
The MLRK1-JAC12 is a cost-effective and straightforward way to upgrade your Jackson 12, Kawneer 16/17 and PD16 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty.
MLRK1-JAC12 -
Command Access MLRK1-SGT Motorized Latch Retraction for Sargent 80
The Command Access MLRK1-SGT Motorized Latch Retraction Kit for Sargent 80, Cal Royal 98/22, Dorex 9500, and Arrow Series Exit Devices. The unit is 24 volt with Standard : 900 mA (Avg Current Peak); 200 mA (Avg Current Hold). The unit requires 18 ga wires.1) Motor Mount; (1) 40801 Phillips Head Screw; (1) 50030 6 Feet Power Lead; (1) 50944 Molex Pigtail; (2) 40060 Cable Tie; (2) 40059 Mounting Pad; (1) 60368/51186 Remote mm4s Module; (1) 50741 Remote Module Cable
The MLRK1-SGT is a cost-effective and straightforward way to upgrade your Sargent 80, Cal Royal 98/22, Dorex 9500, Arrow 1000 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty
MLRK1-SGT -
Command Access MLRK1-VD22 Motorized Latch Retraction for Von Duprin 22
The Command Access MLRK1-VD22 is a motorized electric latch retraction with REX for the Von Duprin 22. This motor is 24 to 28 volts and has a Standard : 900 mA (Avg Current Peak); 215 mA (Avg Current Hold). This unit requires 18 ga wire. And ships with (1) Motor Mount with MM5; (2) 40002 - 8/32 x 1/4 inch Phillips Head Screw; (1) 50030 8/Lead with vd Connector; (1) 50944 Molex Pigtail; (1) 40144 Dogging Hole Cap; (1) 50991 Fire Rated Drilling Template; (1) Replacement Dogging Tail Piece.
The MLRK1-VD22 is a cost-effective and straightforward way to upgrade your Von Duprin 22 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty
MLRK1-VD22 -
Command Access PS204 Power Supply
The PS204 power supplies input 110-120VAC and deliver (2) amps @ 24VDC to (4) PTC fused outputs. It also provides (4) solid-state input triggers, protects system relays from shorts, grounds and surges. Its linear design makes it a perfect match for electric locks, motor driven exit devices, electric strikes, and mag locks. Box measures 13 x 15.5 x 5 inches.
PS204 -
Concealed Mount Push and Pull Plate Sets
The Concealed Mount Push and Pull Plate Sets feature an 1/8 inch push plate with a 1/20 inch plate plate. The handle is surface mounted with thru mounted studs. 8 inch center handles are 3/4 inch diameter, 10 in and 12 inch center handles are 1 inch diameter.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
G74X5325B -
Concealed Surface Mounted Bolt
Fully concealed mounting design which enhances appearance and security. Furnished with universal top strike and flat bottom strike. The bolt measures 8 x 1 inches and is constructed of extruded steel with a brushed chrome finish. Ships with mounting screws, and the latch is UL listed.G597 -
Corbin 100/110/120 Door Closer
The Russwin 100, 110 and 120 in no longer available. They have been replaced by the DC6210, which has the same hole spacings and arm. You will not have to redrill or modify your door to make the DC6210 work in place of your existing 100, 110 or 120 door closers. The DC6210 has a little bit larger body due to the increased functionality of this closer. This new closer will meet all the ADA requirements.
Uses the same mounting bracket as the 100, and 2800 series.
Older models may have SL72 or MS93 cast on the cylinders. You may also find Clarksdale, MS cast on the cylinder also.
DC6210b -
-
-
Corbin Russwin 677F02-9 Plastic Lever Spacer Ring
The Corbin Russwin 677F02-9 Plastic Lever Spacer Ring has an outside diameter of .780 inches and an inside diameter of .730 inches. The height is .345 of an inch, the flaired collar has an outside diameter of 1 inch. This bushing is used on the 900 Series Lever Trim on the ED4000 and ED5000 Series.
G677F02 -
Corbin Russwin Adjusting Nut
Corbin Russwin Adjusting Nut 483F35-8
This Corbin Russwin Adjusting Nut is used on the Corbin Russwin Mortise Lever Locks. It threads into the end of the spindle. 2-3/8" overall length, 9/16" thread length, 1-15/16" bolt length. The threads are 1/4-28.
Corbin Russwin part # 483F35-8
G483F35 -
Corbin Russwin DC3210 Door Closer
Corbin Russwin DC3210 Door Closer
The mid-priced, cost-effective choice for high-traffic situations. Corbin Russwin DC3000 Series Door Closers fulfill security and life safety requirements by ensuring reliable latching for access control and fire code compliance, along with ease of operation and precise adjustability for barrier-free code compliance. Ideal for virtually all door openings and draft conditions in both new construction and renovations.
Fits on the same bracket as the 100, 110, 120, 2800, 2810 and 2820 Corbin Russwin Door Closers
Idea for interior doors.
DC3210- -
Corbin Russwin DC6210 Door Closer
Corbin Russwin DC6210 Door Closer
Corbin Russwin’s history combines high-quality product and innovative design. That tradition continues with the new Grade 1 DC6000 Series door closer, designed and engineered with quality features such as captured valves and a complete range of new arms. The DC6000 series is the perfect closer for high-use openings or openings that must meet ADA requirements, such as schools, office buildings, health care facilities, and retail complexes. The series also meets UL and UL10C positive pressure requirements for fire openings.
Uses the same mounting bracket as the 100,110, 120 and 2800, 2810 and 2820 series and also the , DC220, DC2400, and DC2600
Older models may have SL72 or MS93 cast on the cylinders.
You may also find Clarksdale, MS cast on the cylinder also.DC6210-- -
Corbin Russwin DC8210 Door Closer
Corbin Russwin DC8210 Door Closer
Applications
High-quality products and innovative designs are the foundation for the long
history and reputation of Corbin Russwin Architectural Hardware. That tradition
continues with the Grade 1 DC8000 Series door closer, the perfect choice for
high-use openings and doors that must meet ADA requirements. A variety of
arms, finishes and quality features make the easy-to-install DC8000 ideal for
schools, office buildings, health care facilities and retail complexes.DC8210- -
Corbin Russwin ED2200 Rim Exit Device
Single Door; Easy-To-Use Pushpad for Quick Egress and ADA Compliance; Low Profile and Projection for Barrier-Free Code Compliance; No Projecting Parts to Inhibit Egress; Single Point Latching. School and University; Health Care; Government and Public; Commercial and Industrial; Office and Retail; Transportation and Utilities; Hotels and Conference Centers; Religious
For 36" doors, aluminum finish only.
ED2200
