Manufacturers
-
Norton PTO Track for 7705 PowerTrack
The Norton PTO PowerTrack for 7705 is a replacement piece for the 7705PTO Door Closer. The Track includes the Slider, Soleniod and new mounting screws. The Track measures 21-1/4" long with a hole spacing of 19" on centers. The PTO Track is for the Pull Side of the door, also known as the Hinge Side because you can see the hinges on that side.
Norton Part # PTO24 or PTO120
PTO24-- -
Norton PPTO Track for P7705 PowerTrack
The Norton PPTO PowerTrack for P7705 is a replacement piece for the P7705PTO Door Closer. The Track includes the Slider, Soleniod and new mounting screws. The PPTO Track is for the Push Side of the door, also known as the Stop Side because the track mounts on the jamb stop.
Norton Part # PPTO24 or PPTO120
PPTO24-- -
Sargent 1330 Door Closer
Sargent 1330 Door Closer
Grade 1 requirement, non sized and non handed, heat treated rack and pinion for longer life, separate closing, latching, back check and power adjustments, and a 10 year warranty. The aluminum color is in stock, dark bronze finish may take a few days to ship.
We ship the 1331-JUO
3/4" x 12" hole spacing1330- -
Sargent 1430 Door Closer
Sargent 1430 Powerglide Door Closer
- ANSI/BHMA A156.4 Grade 1
- 25-year warranty
- Versatile mounting applications permit standard, top jamb, parallel and track installations
- Adjustable Spring Power allows the 1431 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory.
Retrofits existing SARGENT 1230/1231 Series
Closer installations1430- -
Sargent 281 Door Closer
Sargent 281 Powerglide Door Closer
ANSI/BHMA Grade 1 (A156.4)
• Meets Buy American Act
• Ten Year Warranty
• Versatile mounting applications permit
standard, top jamb, parallel and track
installations
• UL and cUL listed for use on fire doors
• Adjustable spring power allows 281
closers a size range of 1 through 6. They
are adjusted to Size 3 before leaving the
factory
• One door closer body for all applications,
non-handedReplaces the older Sargent 1250 and 1251 door closers, mounting holes will match
281- -
Sargent 350 Door Closer
Sargent 350 Powerglide Door Closer
- ANSI/BHMA A156.4 Grade 1
- UL Listed and cUL Listed to Canadian Safety Standards listed for use on fire doors
- 10-year warranty
- Versatile mounting applications permit standard, top jamb, parallel and track installations
- Adjustable spring power allows 351 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory
- One door closer body for all applications, non-handed
We ship the Sargent 351 Door Closer
350- -
Sargent Door Closer Heavy Duty Compression Holder Arm
Sargent Door Closer Heavy Duty Compression Holder Arm
Forged Steel Arm 11-1/4" long, non handed, will work left or right for Parallel Armed Sargent Closers. Permits 105 degree opening with built in compression stop and holder mechanism.
Sargent Part # 25-CPSH
25-CPSH- -
Yale 2300 Door Closer-Discontinued
Yale 2300 Door Closer
- Spring size 2, 3, 4, 5
- Separate and independent valve for sweep speed and latch speed
- Adjustable backcheck standard
- Regular, top jamb, parallel mount
- 5-year limited warranty
- ANSI/BHMA A156.4 Grade 3
3/4" x 9-1/16" hole spacing
In April of 2023 Norton Yale have discontinued the 2300 and 9300. The Norton 1600 will be sent in place of the 2300. Same Hole Spacing, but adjustable spring tension.
2300- -
Yale 3300 Door Closer
Yale 3300 Door Closer
- Adjustable spring sizes 1 thru 6
- Rack-and-pinion design
- 1-1/4" (32mm) diameter piston
- 5/8" (16mm) diameter pinion journals
- Cast aluminum body
- Standard, separate and independent, latch,
sweep and backcheck intensity valves - Staked valves
- Molded plastic cover standard
This door closer replaces the older 3301BF closers. The new version is Barrier Free Complaint.
3/4" x 12" hole spacing, the cylinder is sometimes cast 20-3301-1001 on the back of the cast aluminum
cylinder.3300- -
Yale 3500 Door Closer
Yale 3500 Door Closer
- Adjustable spring sizes 1 thru 6
- Rack-and-pinion design
- 1-1/4" (32mm) diameter piston
- 5/8" (16mm) diameter pinion journals
- Cast aluminum body
- Standard, separate and independent, latch,
sweep and backcheck intensity valves - Staked valves
- Molded plastic cover standard
We ship the model # 3501, this closer replaces the 3501BF. The new version meets the Barrier Free compliance codes.
3500- -
Yale 4400 Door Closer
Yale 4400 Door Closer
- Non-handed
- Rack-and-pinion design
- Cast aluminum body
- 2-1/8" (54mm) projection
- 1-1/2" (38mm) diameter piston
- 5/8" (16mm) diameter pinion journals
- Staked valves
- Standard, separate and independent, latch, sweep and
backcheck intensity valves - Backcheck positioning valve
- NorGlide® fluid
- Molded plastic cover
- All standard arm applications allow doors to swing 180°,
conditions permitting - Self-drilling screws
- Full-size template
- 10-year limited warranty
2-3/8" x 6-3/4" hole spacing. This door closer replaces the 4400BF. This newer version is Barrier Free Compliant.
4400- -
Yale 50 Series Door Closer
Yale 50 Series Door Closer
- ANSI A156.4, Grade 1
- 10-year warranty
- Non-handed
- Rack-and-pinion design
- Cast aluminum body
- 1-3/8" (35mm) diameter piston
- 5/8" (16mm) diameter pinion journals
- Standard, separate and independent, latch, sweep
and backcheck intensity valves - 2-7/8" (73mm) projection
- Tri-Packed- packed for regular arm, top jamb and
parallel arm installations. - All standard arm applications allow
Older models may be stamped with Scoville or Eaton, which are the companies that used to own Norton
We some times find 20-0054-4001 or 20-0254-4001 stamped on the back of the closer50- -
Dorma 8900 Series
The heavy-duty 8900 Series non-handed surface applied closer
with adjustable spring power and backcheck positioning adjustment.
The 8900 has intensity adjustable hydraulic backcheck
that will take effect at approximately 65º. The 8900 has two
independent, noncritical adjustment valves to control sweep and
latch closing speeds. The backcheck positioning valve maintains
an effective backcheck range on parallel arm applications. The
8916 will be available with field adjustable spring power from size
1 to 6 for barrier-free requirements.8900- -
International 8000 Series End Cap
The International 8000 Series End Cap is used on the hinge side of the the exit device. This cap includes the mounting bracket and the mounting screws. It is constructed of a die cast metal for years of service. The piece measures 2-3/8" by 2-1/4" by 1-1/2". This end cap is used on the International Door Closer models, 8510S, 8610S, 8710S, 8810S, 8620S, 8530S, and 8650S devices, along with the same devices ending in F.
INT8600EC- -
LCN 1370 Quick Fix Plate
The LCN 1370 was a door closer made in the late 1990's to 2006 or so. The closer had a special mounting plate that made installation very quick. Many people have this door closer in use and now they are starting to fail. The LCN 1370-18QF Quick Fix Plate converts the mounting holes of the 1370 to a standard template closer, which is 3/4" x 9-1/16". By using this plate you will not have to redrill holes in your door. The plate measures 2 by 10-1/4 inches with tapped holes that measure 3/4 x 9-1/16 inch.
1260-18QF-