Not sure what you have? Send us a picture to Sales@RobertBrooke.com
0
My Cart
item(s) - $0.00

In stock orders placed now will be shipped next business day.

Shop By
Manufacturer
  1. Arrow
  2. Bilco
  3. Brass Accents
  4. Burns Manufacturing
  5. Corbin Russwin
  6. Finger-Gard
  7. Global Door Controls
  8. International Door Closer
  9. Ives
  10. Kawneer
  11. Lockwood
  12. Mag Engineering
  13. Markar
  14. National Guard Products
  15. PBB
  16. Progressive
  17. Rixson
  18. Sargent
  19. Security Latch
  20. Von Duprin Exit Devices
  21. Yale
Price
  • 6 340

Door Hardware

Selling commercial and residential Door Hardware to schools and institutions for the past 50 years.  We offer  Corner Guards, Kick Plates, Pull and Push Plates in all different sizes and finishes at wholesale pricing.

Grid  List 

Desc
  1. 30.52 $30.52
    SKU: LG1

    The Lock Guard with Security Pin is ideal to cover the latchbolt area of the door, lock and frame, with the added protection of a security pin to prevent separation of the door and door frame.  The plate is through bolted with carriage bolts and nuts, which are included with the guard.  The plate is constructed of 13 gauge stainless steel.  The plate measures 3" wide and 11-1/2" high, with a center to center on the mounting bolts of 10-1/2".

  2. 16.6 $16.60
    SKU: 1625NL
    • Narrow design unit for use on rose or escutcheon 3-1/2" or less.
    • For use with Type 86 Mortise and Type 161 Cylinder Locks
      (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
    • No exposed fasteners on face of unit.
    • Unique design provides maximum security, virtually eliminating the opening
      between door and frame at the latch point.
    • Available in 13 Gauge Stainless Steel or 12 Gauge Steel

    1-1/2" Wide x 9-1/2" High
    Stud center to center: 8-1/2”

  3. 17.7 $17.70
    SKU: 1625
    • Ideally suited for use with rose or escutcheon 2-3/4" wide or less.
    • For use with Type 86 Mortise and Type 161 Cylindrical Locks
      (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
    • No exposed fasteners on face of unit.
    • Unique design provides maximum security, virtually eliminating the
      opening between door and frame at the latch point.
    • Available in 13 Gauge Stainless Steel or 12 Gauge Steel.

    2-1/2" Wide x 9-1/2" High
    Stud center to center: 8-1/2"

  4. 16 $16.00
    SKU: 1625SL
    • Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000)
      Monolock and Unilock.
    • No exposed fasteners on face of unit.
    • Unique design provides maximum security, virtually eliminating the
      opening between door and frame at latch point.
    • Available in 13 Gauge Stainless Steel or 12 Gauge Steel.

    1-1/2" Wide x 7" High
    Stud center to center: 4-1/2"

  5. 57 $57.00
    SKU: GDA8145

    Full Mortise Double Acting Spring Hinge

    Used mainly for commercial kitchen doors,  or any commercial double swinging door.   Sold in sets of 2 hinges, they will handle doors up to 75 lbs that are 1-3/4" thick.   If you door weighs between 75 and 107 lbs, you should use 3 hinges.  The door flange is designed for a standard 4-1/2" x 4-1/2" template mortise.   Hinges ship with wood and metal mounting screws.

  6. 120 $120.00
    SKU: DSO

    The Barracuda Model DSO is for Out Swinging 36" Doors and provides up to 550 pounds of security.   It is constructed of heavy duty steel with a durable powder coated finish.  The bar goes across the door frame and grabs the lever or knob set with an adjustable clamp.  To secure the door, simply turn the handle until it is secured.  They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4".  This device ships with all of the hardware and a wall mounting rack for storage.   

    Barracuda Part # DSO-1 and DSO-2

  7. 120 $120.00
    SKU: DSI

    The Barracuda DSI is designed for In Swinging 36" Doors.  The user places the deive on the floor and slides the metal plates under the door.   Then pushing outward on the handles engages the plates to the exterior door jamb.   Then you simply install the locking pin to barracade the door.   The device is manufactured of heavy-duty steel that is then coated in a durable powder coat paint.   It will work on just about any door and comes in 6 different versions depending on your jamb width.   It is lightweight and comes with a storage mounting rack, along with all the the needed hardware for installation.

    Barracuda Part Number
    4-3/4"  DSI-2
    5-3/4"  DSI-1
    6-3/4"  DSI-3
    7-3/4"  DSI-4
    8-1/4"  DSI-5
    8-3/4"  DIS-6

  8. 130 $130.00
    SKU: DSO-PB

    The Barracuda DSO-PB is for use on Out Swinging 36" Doors with Exit Devices.  It is constructed of heavy duty steel with a durable powder coated finish.  The bar goes across the door frame and grabs the mounting cleat with an adjustable clamp.  To secure the door, simply turn the handle until it is secured.  They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4".  This device ships with all of the hardware and a wall mounting rack for storage. 

  9. 22 $22.00
    SKU: GAM385A

    4-1/4" long

    Dorma part # AM385A

  10. 51.2 $51.20
    SKU: GA07-P5401

    Decorative Pull Plate A07-P5401

    Quaker Push & Pull Collection
    Featuring 2-3/4" x 10" Plates
    • All BRASS Accents finishes are hand-rubbed and assembled in USA.
    • Sold as complete set including matching mounting screws.
    • Top surface 2" x 9-3/8".

  11. 34 $34.00
    SKU: GA07-P5400

    Quaker Push & Pull Collection
    Featuring 2-3/4" x 10" Plates
    • All BRASS Accents finishes are hand-rubbed and assembled in USA.
    • Sold as complete set including matching mounting screws.
    • Top surface 2" x 9-3/8".

  12. 15 $15.00
    SKU: GHE10

    Door Pull 10

    This door pull has 5-1/2" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 6-1/4". The projection is 2" and the clearance is 1-1/2". Also known as a Door Handle or Door Grip. This handle ships with thru bolts and finish washers.

    Finishes

  13. 24 $24.00
    SKU: GHE11

    Door Pull 11

    This door pull has 8" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 9-1/4". The projection is 2-1/8" and the clearance is 1-1/2". Also known as a 8" Center Door Grip or Door Handle. This handle is shipped with thru bolts and finish washers.

    Finishes

  14. 19.2 $19.20
    SKU: GHE12

    Door Pull 12

    This handle has a 5-1/2" centers hole spacing and is 6" overall. It has 2" projection with 1-3/8" clearance and the base is 5/8" x 1-1/4". Also known as a Door Handle or Door Grip. Shipped with thru bolts and finish washers.

    Finishes

  15. 36.8 $36.80
    SKU: GHE39

    Door Pull Offset 1" Diameter 39

    This door handle is made of 1" round stock in either solid, alumunum, brass or stainless steel. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Offset Door Handle or Door Grip, and Storefront door handle.

    1" diameter material
    2-3/4" projection
    2-3/4" offset

    Finishes

  16. 12 $12.00
    SKU: IDC97V

    Door Sweep 1" Long Rubber

    Extruded aluminum rail with a 1" gray rubber seal. Available in aluminum or dark bronze. Screws included.

    International Part # IDC-97V

  17. 228 $228.00
    SKU: M422xM39

    1-1/4" diameter materal
    Offset Door Handle
    Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.

    Please specify either wood or metal door, and its thickness; we'll supply
    appropriate fasteners.

    Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes

    Finishes

  18. 7.5 $7.50
    SKU: GPH50

    Push Plate 50-Most Common

    .050" thick 4 bevel edge

    Finishes

    3 x 12" GPH312
    3.5 x 15" GPH315
    4 x 16" GPH416
    6 x 16" GPH616
    4 x 20" GPH420
    8 x 16" GPH816

  19. 36 $36.00
    SKU: G60045

    Half Mortise 4-1/2" Door Hinge-Box of 3

    Steel construction, five knuckle, two bearing, square edge, Half Mortise 4-1/2" Door Hinge.  Sold in boxes of 3 hinges, ships from California.   Available in Brushed Chrome and Paint Primed (gray).

  20. 36 $36.00
    SKU: G80045

    Full Surface 4-1/2" Door Hinge-3 per box

    Full Surface, steel construction, five knuckle, two bearing butt hinge.  Sold 3 in a box with wood and machine screws.   Available in Brushed Chrome and Paint Primed.  Ships from California.

  21. 40 $40.00
    SKU: G70045

    Half Surface 4-1/2" Door Hinge-Box of 3

    Steel construction, five knuckle, two bearing, square edge, Half Surface 4-1/2" Door Hinge.  Sold in boxes of 3 hinges, ships from California.   Available in Brushed Chrome and Paint Primed (gray).

  22. 18 $18.00
    SKU: G100XX

    • For standard weight doors
    • Low frequency usage
    • Packed with wood and metal screws
    Not for use with a door closer.

    Sold in boxes of 3
    Shown in brushed brass

  23. 32.85 $32.85
    SKU: G200XX

    • For medium weight doors
    • Medium frequency usage
    • 2 ball bearing
    • Packed with wood and metal screws

    Sold in boxes of 3
    Shown in brushed chrome

  24. 53.85 $53.85
    SKU: G300XX

    • For heavy weight doors
    • High frequency usage
    • 4 ball bearing
    • Packed with wood and metal screws

    Sold in boxes of 3 Hinges
    Shown in brushed chrome

Grid  List 

Desc