Push Pull Bars | Burns Manufacturing | Aluminum

1" diameter materal
Offset Door Handle
Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.

Please specify either wood or metal door, and its thickness; we'll supply
appropriate fasteners.

Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes

Finishes

1" diameter material
Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.

Please specify either wood or metal door, and its thickness; we'll supply
appropriate fasteners.

Please allow 3-4 weeks on Aluminum and Dark Bronze, and 2 weeks on the other finishes

Finishes

1-1/4" diameter materal
Offset Door Handle
Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.

Please specify either wood or metal door, and its thickness; we'll supply
appropriate fasteners.

Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes

Finishes

The 422 x 422 Push Bar Set is constructed of 1 inch diameter solid stock, and is shipped to your specified center to center dimensions. The push bar has a 1-1/8 clearance and 2-1/8 inch projection. The set ships with back to back fasteners.

The M422 x M422 Push Bar Set is constructed of 1-1/4 inch diameter solid stock, and is shipped to your specified center to center dimensions. The push bar has a 1-1/2 clearance and 2-3/4 inch projection. The set ships with back to back fasteners.

The 422 with 49D are constructed of 1 inch solid stock, with the material determined by the finish (color). The push bar has a clearance of 1-1/8 and the handle has a clearance of 1-1/2 inches. The projection is 2-1/8 on the push bar and 2-1/2 inches on the handle. The pull handle is 12 inches on center, with a 7 inch offset. The set comes with two 5/16-18 thru bolts and one 5/16 back to back conehead.

The M422 with M49D are constructed of 1-1/4 inch solid stock, with the material determined by the finish (color). The push bar has a clearance of 1-1/2 and the handle has a clearance of 1-1/2 inches. The projection is 2-3/4 on the push bar and 2-3/4 inches on the handle. The pull handle is 12 inches on center, with a 7 inch offset. The set comes with two 5/16-18 thru bolts and one 5/16 back to back conehead.

Push Bar 1' Diameter 422
Bar is made of solid aluminum, Stainless Steel or Bronze. The bar comes with thru bolts for mounting

Material Size 1 " round
Base 1" Round
Clearance 1-1/8"
Projection 2-1/8"

Please allow 4 weeks on Aluminum, Polished Brass, and Oil Rubbed Bronze. Stainless Steel and Polished Stainless Steel take about 2 weeks.

The 422SB Push Bar is the same as our popular 422, except it only has a single bend. The bar is made of 1 inch diameter solid aluminum, brass, bronze or stainless steel. It has a projection of 2-1/8 inches with a clearance of 1-1/8 inches. The bar is fastened to the door with a 5/16-18 thru bolt. Each bar is custom made to order.

Push Bar with Posts has a 1 inch diameter push bar and the mounting posts are 7/8 inch round. The bar has a clearance of 1-1/2 inches and a projection of 2-1/2 inches. Base material is either aluminum, brass, bronze or stainless steel depending on the finish. To order specify the Color (finish), Mounting Center to Centers, Bar overall length, and Door Thickness.

Push Bar with Posts has a 1-1/4 inches diameter push bar and the mounting posts are 1 inch round. The bar has a clearance of 1-1/2 inches and a projection of 2-3/4 inches. Base material is either aluminum, brass, bronze or stainless steel depending on the finish. To order specify the Color (finish), Mounting Center to Centers, Bar overall length, and Door Thickness.

The 418/418S is constructed of 3/8 x 1-1/2 inch of aluminum, brass, bronze or stainless steel bar stock. It projects out 2 inches and has a clearance of 1-1/2 inches. It is available with and without a mounting pad. The mounting pad would measure 1 x 3 x 1/8 inch. The bars are shipped with mounting fasteners.