Exit Devices
Exit Devices and Hardware to Ensure Safety in Your Commercial Building
At Robert Brooke & Associates, we are known for being a top distributor of exit devices (also sometimes called panic devices) and hardware from highly-esteemed and trusted brands throughout the door security industry. The exit devices we have available can be newly installed on doors in various facilities with a constant inflow of visitor traffic. We also sell door hardware that can replace old or worn down hardware on your previously-installed devices.
Having a security system in place on doors has become crucial to the safety of visitors in a building. Whether in a school, office, or another type of building, regulars and visitors deserve to feel safe. One reason we entered into the industry was to be able to provide consumers with exit devices that can potentially minimize danger in buildings everywhere.
Our selection consists of surface vertical rod devices, concealed vertical rod devices and more. Don’t forget, we also have a wide selection of replacement hardware to keep your exit devices up-to-date and in excellent condition.
Exit Device Manufacturers
We carry several different styles of exit devices all made by reputable manufacturers. From Dorma exit devices to exit devices by Von Duprin, we have what you’ve been searching for! Plus, we have replacement door hardware for these devices from several first-rate brands in the industry. For a brief overview of each manufacturer and their products available in our selection, see below.
- Adams Rite
- Cal-Royal
- Corbin Russwin
- Detex
- Dorma Exit Devices
- Dor-O-Matic
- International Devices
- Jackson Exit Devices
- Monarch (Falcon) Exit Devices
- Sargent Exit Devices
- Exit Devices by Von Duprin
- Yale Exit Devices
High-Quality Exit Devices
Our website offers a convenient search tool so that customers are able to do a quick search for a specific item they are looking for. If there is no specific search in mind, browsing the array of panic devices will assist in narrowing down the options.
Our available selection includes surface vertical rod, concealed vertical rod, touch bar, push bar, heavy-duty exit devices and a number of other styles that you can order straight from our website. With several of these, you will have the option to choose the color, finish and size that you prefer.
Make note of whether you will need to order panic devices that work on single doors or ones that work on double doors for your installation project. Depending on the product, the panic devices on our website can work on either single or double. Reading the details will also tell you whether they are left-handed, right-handed or non-handed.
Click on the product image or text to find more dimensional and pricing information, along with the type of doors that the product can be used with. Remember to keep this information in mind when ordering your panic devices for your school, business, office, organization, athletic center or other facility.
Door Hardware for Exit Devices
We also carry an assortment of hardware for when a replacement part is needed to repair an exit device. The type of hardware that is required to make repairs to your exit device will depend on what type of device has been installed on the commercial building doors.
Dog keys, strike plate assemblies, end caps, dogging pins, mounting base kits, solenoids, lever trims, lever springs, spring retainer hubs and screws are just a few of the replacement parts that we have available in our online selection. Whatever the reason be that you require new hardware, we have the best replacement parts for you that will do just the trick. We can help you choose the best hardware to get your exit device working good as new.
Check Out Our Shipping and Handling Policy
Be sure to read our online product descriptions of each device and piece of hardware that you are interested in purchasing. The product description will have the shipping details for that particular item.
The shipping times will vary. If the Lead Time next to the product is In Stock, then the items that you chose to order will be shipped from our warehouse with no delay. The Lead Time for a product can also be a day, a week or more. In this case, your order will take longer to ship because it will be coming from the manufacturer.
Order Your Exit Devices Online
Buy your exit devices and door hardware online today! We not only have a supply of Sargent exit devices and exit devices by Von Duprin, but we also have so much more that can be shipped to you immediately.
We want to make sure that you are comfortable with your order and that any question you have is answered in a timely manner. Contact us with questions before you move forward with checking out and we will give you expert answers.
-
Doromatic Exit Device 1690/1990 Retractor
Doromatic retractor. The pinion rides inside this bracket to raise and lower the internal rods. Parts used with the retractor are the Pinion (G199005), Traveller (G199028) and the Pinion Bushing (G199046). Retractor measures 1-7/8" long by 7/8" wide by 1/4" thick.
Doromatic part # PB35 or RETRACT.101
G199035 -
Cal Royal GLS7700 Narrow Stile Rim Device
The Cal Royal GLS7700 Rim Device is for use on Aluminum Framed Glass Doors when the Stile width is 1-3/4 inch or more. The exit device ships with wood and machine screws, along with the Strike plate. The stainless steel latch bolt has a 3/4 inch throw. This device is a Grade 1, which is the heaviest duty rating.
GLS7700- -
Cal-Royal 9800 Rim Device
The Cal-Royal 9800 Rim Device is a grade 1 Heavy Duty Exit Device. The 9800 has the same template as the 8800 and 9800 with escutcheon lever trim. The 36 inch device will be 32 inches wide and can be cut down an additional 2" to fit doors as narrow as 30 inches. The 48 inch will be 44 inches wide and can be cut down to fit doors 36 inches wide. The device is non handed, meaning it will work on a left hand reverse or right hand reverse door. Strike and mounting screws are included.
9800EO- -
Command Access MLRK1-FAL17 Motorized Latch Retraction
The Command Access MLRK1-FAL17 Motorized Latch Retraction Kit With REX is for use on the Falcon Dor-o-matic 1690/1790, AHT4/5, and First Choice 3600/3700 Series Exit Devices. The unit is 24 volt with Standard : 900 mA (Avg Current Peak); 200 mA (Avg Current Hold). The unit requires 18 ga wires. The package includes: 1) Motor Mount with MM5; (1) 50944 Molex Pigtail; (1) 50030 6 Feet Lead with VD Connector; (2) 40124 10-24 x 3/8inch Phillips Screws (Silver); (2) 40125 10-24 x 3/8inch Phillips Screws (Black).
The MLRK1-FAL17 is a cost-effective and straightforward way to upgrade your Falcon 1690/1790, First Choice 3600/3700, & AHT 4/5 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty
MLRK1-FAL17 -
Cal-Royal 9000 Series Lever Trim HDESC
Cal-Royal 9000 Series Lever Trim HDESC is for use on the 9800 and 9800 Exit Devices. The Trim has a clutch mechanism to prevent breaking and two heavy duty springs to prevent sagging. Escutcheon measures 2-5/8 inches wide by 10-5/8 inches long. The lever projects out 2-7/8 inches. Key locks or unlocks lever.
HDESC- -
Corbin Russwin 677F02-9 Plastic Lever Spacer Ring
The Corbin Russwin 677F02-9 Plastic Lever Spacer Ring has an outside diameter of .780 inches and an inside diameter of .730 inches. The height is .345 of an inch, the flaired collar has an outside diameter of 1 inch. This bushing is used on the 900 Series Lever Trim on the ED4000 and ED5000 Series.
G677F02 -
Adams Rite Cylinder Dogging Assembly 31-0265-01-IP
The Adams Rite 31-0265-01-IP is used on the current versions of their devices for Cylinder Dogging. Cylinder Dogging is when you have a Mortise Cylinder to lock the device in the unlocked positions (Dogged). Very similar to the Hex Key Dogging Assembly, but the mounting plate is longer.
G31026501IP -
Doromatic Exit Device 2090 Assembly Plate
Dor-o-matic 1090/2090 Assembly Plate. This plate can be used if your current device has pulled the screws out, or you want to mount a new exit on a wood door.
Doromatic part #4270100304
G109033 -
Command Access MLRK1-JAC12 Motorized Latch Retraction for Jackson CRL 1200
The Command Access MLRK1-JAC12 Motorized Latch Retraction Kit With REX is for use on the Jackson CRL 1285 and 1295 Series Exit Devices. The unit is 24 volt with Standard : 900 mA (Avg Current Peak); 200 mA (Avg Current Hold). The unit requires 18 ga wires. The package includes: 1) Motor Mount with MM5; (1) 50944 Molex Pigtail; (1) 50030 6 Feet Lead with VD Connector; (2) 40124 10-24 x 3/8inch Phillips Screws (Silver); (2) 40125 10-24 x 3/8inch Phillips Screws (Black).
The MLRK1-JAC12 is a cost-effective and straightforward way to upgrade your Jackson 12, Kawneer 16/17 and PD16 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty.
MLRK1-JAC12 -
Doromatic 1990 and 990 Housing, and 1090 2090 Inactive Housing
Dor-o-matic Complete housing assembly for the 990/1990 and the inactive sides of the 1090/2090. Includes all components to replace your current housing. Housing measures 7-1/2" long by 1-3/16" wide, with a 6-1/4" center to center stud mounting.
See diagrams for handing.
Doromatic part #
4270902784 - right hand dark brown
4270902782 - right hand aluminum
4270902785 -right hand black
4270902778- left hand dark brown
4270902782 - left hand aluminum
4270902779- left hand blackG199001 -
Doromatic 1490 Cylinder Assembly 149CA-NL
No longer manufactured. We do have some of the PB115, which is the die cast disc that has the receiver for the rim cylinder and the plastic nub.
Doromatic 1490 Cylinder Assembly 149CA-NL
Doromatic part # 149CA-NL or 4270107272
149CA-NL
