Exit Devices
Exit Devices and Hardware to Ensure Safety in Your Commercial Building
At Robert Brooke & Associates, we are known for being a top distributor of exit devices (also sometimes called panic devices) and hardware from highly-esteemed and trusted brands throughout the door security industry. The exit devices we have available can be newly installed on doors in various facilities with a constant inflow of visitor traffic. We also sell door hardware that can replace old or worn down hardware on your previously-installed devices.
Having a security system in place on doors has become crucial to the safety of visitors in a building. Whether in a school, office, or another type of building, regulars and visitors deserve to feel safe. One reason we entered into the industry was to be able to provide consumers with exit devices that can potentially minimize danger in buildings everywhere.
Our selection consists of surface vertical rod devices, concealed vertical rod devices and more. Don’t forget, we also have a wide selection of replacement hardware to keep your exit devices up-to-date and in excellent condition.
Exit Device Manufacturers
We carry several different styles of exit devices all made by reputable manufacturers. From Dorma exit devices to exit devices by Von Duprin, we have what you’ve been searching for! Plus, we have replacement door hardware for these devices from several first-rate brands in the industry. For a brief overview of each manufacturer and their products available in our selection, see below.
- Adams Rite
- Cal-Royal
- Corbin Russwin
- Detex
- Dorma Exit Devices
- Dor-O-Matic
- International Devices
- Jackson Exit Devices
- Monarch (Falcon) Exit Devices
- Sargent Exit Devices
- Exit Devices by Von Duprin
- Yale Exit Devices
High-Quality Exit Devices
Our website offers a convenient search tool so that customers are able to do a quick search for a specific item they are looking for. If there is no specific search in mind, browsing the array of panic devices will assist in narrowing down the options.
Our available selection includes surface vertical rod, concealed vertical rod, touch bar, push bar, heavy-duty exit devices and a number of other styles that you can order straight from our website. With several of these, you will have the option to choose the color, finish and size that you prefer.
Make note of whether you will need to order panic devices that work on single doors or ones that work on double doors for your installation project. Depending on the product, the panic devices on our website can work on either single or double. Reading the details will also tell you whether they are left-handed, right-handed or non-handed.
Click on the product image or text to find more dimensional and pricing information, along with the type of doors that the product can be used with. Remember to keep this information in mind when ordering your panic devices for your school, business, office, organization, athletic center or other facility.
Door Hardware for Exit Devices
We also carry an assortment of hardware for when a replacement part is needed to repair an exit device. The type of hardware that is required to make repairs to your exit device will depend on what type of device has been installed on the commercial building doors.
Dog keys, strike plate assemblies, end caps, dogging pins, mounting base kits, solenoids, lever trims, lever springs, spring retainer hubs and screws are just a few of the replacement parts that we have available in our online selection. Whatever the reason be that you require new hardware, we have the best replacement parts for you that will do just the trick. We can help you choose the best hardware to get your exit device working good as new.
Check Out Our Shipping and Handling Policy
Be sure to read our online product descriptions of each device and piece of hardware that you are interested in purchasing. The product description will have the shipping details for that particular item.
The shipping times will vary. If the Lead Time next to the product is In Stock, then the items that you chose to order will be shipped from our warehouse with no delay. The Lead Time for a product can also be a day, a week or more. In this case, your order will take longer to ship because it will be coming from the manufacturer.
Order Your Exit Devices Online
Buy your exit devices and door hardware online today! We not only have a supply of Sargent exit devices and exit devices by Von Duprin, but we also have so much more that can be shipped to you immediately.
We want to make sure that you are comfortable with your order and that any question you have is answered in a timely manner. Contact us with questions before you move forward with checking out and we will give you expert answers.
-
Yale 7150 Chassis Assembly 60-7150-0005-048
$209.48Yale 7150 Chassis Assembly, Yale Part # 60-7150-0005-048
Learn More -
Command Access MLRK1-FAL17 Motorized Latch Retraction
$450.00The Command Access MLRK1-FAL17 Motorized Latch Retraction Kit With REX is for use on the Falcon Dor-o-matic 1690/1790, AHT4/5, and First Choice 3600/3700 Series Exit Devices. The unit is 24 volt with Standard : 900 mA (Avg Current Peak); 200 mA (Avg Current Hold). The unit requires 18 ga wires. The package includes: 1) Motor Mount with MM5; (1) 50944 Molex Pigtail; (1) 50030 6 Feet Lead with VD Connector; (2) 40124 10-24 x 3/8inch Phillips Screws (Silver); (2) 40125 10-24 x 3/8inch Phillips Screws (Black).
The MLRK1-FAL17 is a cost-effective and straightforward way to upgrade your Falcon 1690/1790, First Choice 3600/3700, & AHT 4/5 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty
Learn More -
Cal-Royal 9800 Alarmed Exit Device
As low as $592.20The Cal-Royal NARL9800 is a time tested heavy duty Alarmed exit device. Alarm works with a 9 volt battery.
Learn More -
Cal-Royal 9000 Series NESC Lever Trim
As low as $177.36Cal-Royal 9000 Series NESC Lever Trim features hardened steel tailpiece and heavy duty spring to prevent sagging. Standard 6-Pin Schlage C mortise cylinder included. Rigid entrance, key locks or unlocks lever.
Learn More -
Adams Rite P8800 and P8700 Latch End Cap
$64.00The Adams Rite 41-0131-119 Metal End Cap Assembly is used on the Latching Side of the device. It is used on the P8700 and P8800 Narrow Stile Pullman Exit Device.
Learn More -
Cal-Royal 9000 Series Lever Trim HDESC
As low as $278.98Cal-Royal 9000 Series Lever Trim HDESC is for use on the 9800 and 9800 Exit Devices. The Trim has a clutch mechanism to prevent breaking and two heavy duty springs to prevent sagging. Escutcheon measures 2-5/8 inches wide by 10-5/8 inches long. The lever projects out 2-7/8 inches. Key locks or unlocks lever.
Learn More -
Adams Rite P8700-P8800 Roller Strike
$32.00The Adams Rite P8700 P8800 Roller Strike is the Standard Strike for the P8000 Series Pullman Latch Exit Devices. The strike measures 2-15/16 by 1-7/16 inches with a 2 inch on center hole spacing.
Adams Rite Part Number 91-0355 or 41-0975-02 Frame Kit.
Learn More -
Yale 7000 Series Exit Device End Cap
As low as $122.22Yale 7000 Series End Cap
Yale Part # ECK7
Newer impact resistant end cap. Replaces all of the older version end caps for the Yale 7000 series.
Shown in stainless steel.
Learn More -
Corbin Russwin 677F02-9 Plastic Lever Spacer Ring
$5.08The Corbin Russwin 677F02-9 Plastic Lever Spacer Ring has an outside diameter of .780 inches and an inside diameter of .730 inches. The height is .345 of an inch, the flaired collar has an outside diameter of 1 inch. This bushing is used on the 900 Series Lever Trim on the ED4000 and ED5000 Series.
Learn More -
Corbin Russwin 650F54 Top Strike
$124.10The Corbin Russwin 650F54 is used on the ED4400, ED4800, ED5400 and ED5800 Surface Vertical Rod Devices as the Top Latch Strike. The Strike used to have a roller on it, they no longer have the roller.
Learn More -
Adams Rite Cylinder Dogging Assembly 31-0265-01-IP
$31.67The Adams Rite 31-0265-01-IP is used on the current versions of their devices for Cylinder Dogging. Cylinder Dogging is when you have a Mortise Cylinder to lock the device in the unlocked positions (Dogged). Very similar to the Hex Key Dogging Assembly, but the mounting plate is longer.
Learn More -
Von Duprin 33/35A Rim Center Case Kit Less Cover
$435.33Von Duprin 33/35A Rim Center Case Kit Less Cover
Replacement Von Duprin 33/35A Rim Device Center Case.
Von Duprin Part # 050403
Learn More -
Von Duprin 33/35A Rim Center Case Cover Kit
As low as $78.17Von Duprin 33/35A Rim Center Case Cover Kit
Replacement Von Duprin 33/35A Rim Center Case Cover Kit. Screws come with the new cover.
Von Duprin Part # 050483
Learn More -
Doromatic Exit Device 2090 Assembly Plate
$35.19Dor-o-matic 1090/2090 Assembly Plate. This plate can be used if your current device has pulled the screws out, or you want to mount a new exit on a wood door.
Doromatic part #4270100304
Learn More -
Jackson Exit Device Rod and Case Assembly
$194.04The Jackson Exit Device Rod and Case Assembly is used on 7' doors for the models 1085, 1285 and 2086 devices.
Jackson part # 30915J
Learn More -
Yale 7120 Top Concealed Latch
$104.78Top Latch for the Yale 7120 Concealed Vertical Rod Exit Device. Yale part number 60-7020-0057-000
Learn More -
Command Access MLRK1-JAC12 Motorized Latch Retraction for Jackson CRL 1200
$450.00The Command Access MLRK1-JAC12 Motorized Latch Retraction Kit With REX is for use on the Jackson CRL 1285 and 1295 Series Exit Devices. The unit is 24 volt with Standard : 900 mA (Avg Current Peak); 200 mA (Avg Current Hold). The unit requires 18 ga wires. The package includes: 1) Motor Mount with MM5; (1) 50944 Molex Pigtail; (1) 50030 6 Feet Lead with VD Connector; (2) 40124 10-24 x 3/8inch Phillips Screws (Silver); (2) 40125 10-24 x 3/8inch Phillips Screws (Black).
The MLRK1-JAC12 is a cost-effective and straightforward way to upgrade your Jackson 12, Kawneer 16/17 and PD16 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty.
Learn More -
Command Access MLRK1-SGT Motorized Latch Retraction for Sargent 80
$450.00The Command Access MLRK1-SGT Motorized Latch Retraction Kit for Sargent 80, Cal Royal 98/22, Dorex 9500, and Arrow Series Exit Devices. The unit is 24 volt with Standard : 900 mA (Avg Current Peak); 200 mA (Avg Current Hold). The unit requires 18 ga wires.1) Motor Mount; (1) 40801 Phillips Head Screw; (1) 50030 6 Feet Power Lead; (1) 50944 Molex Pigtail; (2) 40060 Cable Tie; (2) 40059 Mounting Pad; (1) 60368/51186 Remote mm4s Module; (1) 50741 Remote Module Cable
The MLRK1-SGT is a cost-effective and straightforward way to upgrade your Sargent 80, Cal Royal 98/22, Dorex 9500, Arrow 1000 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty
Learn More -
Adams Rite 8600 Actuator Assembly 31-0944-IP
$45.23The Adams Rite 31-0944-IP is the fixture that latches on to the Top Strike Plate Assembly 31-0945.
Learn More -
Adams Rite 8600 Solenoid 31-0833-IP
$276.32The Adams Rite EL8600 Solenoid 31-0833-IP is used on their Concealed Vertical Rod. It uses 28 VDC. If your Solenoid is Red or White, then you would need the EL8800 Solenoid.
Learn More -
Yale 7220 Arm and Bracket Assembly 60-7220-0030-999
$70.00Yale Upper Latch Arm and Bracket Assembly 60-7220-0030-048 for use on the 7220 Narrow Stile Concealed Vertical Rod. Used to be called the 7220 Rod and Yoke Bracket Assembly. The Latch Arm and Brackets measures 13-1/4 inches long x 5/8 inches wide.
Learn More -
Adams Rite Latch Retraction Circuit Board
$217.11The Adams Rite Latch Retraction (LR) Ciruit Board is used on devices sold after 2004. The board measures 1-3/4 inches by 2-3/4 inches.
Learn More -
Cal Royal 2200 Series End Cap
As low as $42.58Replacement End Cap and Bracket for the Cal-Royal 2200 Rim and Vertical Rod Exit Devices
Learn More -
Adams Rite 31-0619 Motorized Latch Retraction Control Board
$250.19The Adams Rite 31-0619 is the Circuit Board that controls the Motorized Latch Retraction on the 8000 and 3000 Series Exit Devices. It is also known as the PCBA: SE Main (Black).
Picture coming soon!
Learn More
