Doors| Von Duprin Exit Devices
-
Von Duprin 8827-F Top Latch Kit
Von Duprin 8827-F Top Latch Kit 050462
This is the Top Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Durpin Part # 050462
Old Part # 10267688VR10F -
Von Duprin 99 Push Bar Retrofit Kit-Pbkit
Von Duprin 99 Push Bar Retrofit Kit-Pbkit
Von Duprin's 98/99 Push Bar Retrofit Kit updates your current version touch pad, to the newest version. Used on all the Von Durpin 33A, 35A, 99 and 98's.
Von Duprin part # PBKIT
For doors 30" to 36" order the 36" size. If your door is 36" to 48" order the 48" size
G99R35 -
Von Duprin Exit Device 990NL Trim
The Von Duprin 990NL Trim is the standard NIght Latch Trim for the 99 and 98 Series devices. The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish. The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws. The stanchions coming off the back of the plate line up with the center case mounting screws. The Rim Cylinder shown in the picture is not included.
Von Duprin Part # 990NL-R&V
99NL -
Von Duprin 990DT Trim
The Von Duprin 990DT Trim is the standard Dummy Trim for the 99 and 98 Series devices. The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish. The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws. The stanchions coming off the back of the plate line up with the center case mounting screws.
Von Duprin Part # 990DT-R&V
99DT- -
Von Duprin Exit Device 8827 Top Latch Case
Von Duprin 8827 Top Latch Case for non fire rated doors. This is the part that may be causing your bottom latch to drag on the floor. The Top Latch does all the work on the Von Duprin 8827. When the Top Latch is retracted, it holds the rods in the retracted postion.
Von Duprin part # 050460
Old Part # 10175088VR10 -
Von Duprin Exit Device 88 Lever Arm Right Hand
Von Duprin Exit Device 88 Lever Arm Right Hand
Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. Includes the dog screw, wedge ring, wedge tite screw and wedge, and sometimes they come with the axle
Von Duprin Part # 050438
Old Part # 10074488R80- -
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.
Von Dupin part # 050439
Old Part # 10072988R70- -
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Replacement Grip/Handle only, screws not included. Cast bronze construction, and then plated to the selected finish. The Grip measures 15/16" wide by 6" long. The center to center hole spacing is 5-1/2". This handle works on the Von Duprin 608, 696, 880, and 990 outside trim plates.
Von Duprin Part # 972466 and 972467
Old Part # 969925 and 959122G972466- -
Von Duprin 9927 Top Latch
Von Duprin 9927 Top latch
Used on all the Von Durpin 9827 and 9927's. This latch updates your current latch if your device was installed before October 1998. If your device is newer that October 1998, then use the G050400. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050091
G99VR10 -
Von Duprin 9927 Bottom Latch
Von Duprin 9927 Bottom latch
Replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050401. Mounting screws are included.
Includes screws and bracket
Von Duprin Part # 050090
G99VR55 -
Von Duprin Exit Device 2227 Bottom Latch 050090
Von Duprin 2227 Bottom latch.
Replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.
Includes screws and bracket
Von Duprin Part # 050090
G22VR120 -
Von Duprin Exit Device 2227 Top Latch 050091
Von Duprin 2227 Top latch
This latch is used on devices shipped before October 1998, see related products for the new style latch if your device is newer. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050091
G22VR10 -
Von Duprin Exit Device 3327 Top Latch 050400
Von Duprin 22, 33, and 9927 Top latch
This latch is used on the 2227, 3327A, and 9927 Surface Vertical Rod Devices. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws. The mounting bracket is sometimes included, and sometimes they are not. Call us and we will check.
Von Duprin Part # 050400
G050400 -
Von Duprin Exit Device 3327 Bottom Latch 050401
Von Duprin 22, 33, 9927 Bottom latch.
Used to replace the bottom latch on the Von Duprin 2227, 3327A, and 9927 on devices shipped after October 1998.
Includes screws and sometimes the bracket
Von Duprin Part # 050401
G050401 -
Von Duprin 8827-F Top Latch Cover Kit
Von Duprin 8827-F Top Latch Cover Kit - 050465
This is the Top Latch Cover for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Durpin Part # 050465
Old Part # 96120688VR30F -
Von Duprin Exit Device 2227 Top Vertical Rod
Von Duprin 2227 Top Vertical Rod.
The standard top rod will fit a 7'1" door, if your door is higher than 7'1", you will need to top rod extension. The top rod is field adjustable to fit any door less than 7'1". Please call if your door is higher than 7'1"
Von Duprin part # 109361
G22VR60- -
Von Duprin Strike 385A
Von Duprin Strike 385A
The Von Duprin 385A Strike is used on the floor for the Von Duprin 2227, 8827, 9827 and 9927 Surface Vertical Rods. The strike face plate outside dimensions are 2-1/4" x 2-1/4" with an inside dimension of 1-1/8" by 1". This floor strike features a bolt that can be cemented into the floor. Zinc plated finish.
385A