Lockers

Padlock Staple for Lockers

Stamped steel construction with zinc plating, .087" thick. Made in the USA.

Lock Hole Filler Plate for Lockers, Hole Spacing 2-3/16"
Used for covering up the 3 holes that are used for a built in master lock. Made in the USA. Also known as 91003, 70024, bu0115, lu124.

Locker Slotless Bolt 10-24 x 3/8 for locker hinges, number plates, locker sides, tops, bottoms and more.

Slotted Head Bolt 10-24 X 1/2"

Locker Hex Nut 8-32

Slotted Head Bolt 8-32 X 1/2"

10-24 Hex Nut for Lockers

Locker Kep Nut 10-24

Locker Kep Nut 8-32

Slotless Bolt 10-24 X 1/2" for lockers.

Superior List Industries locker recess lifter only, This is for a right hand locker facing them. Left hand are available upon request.

Superior List Industries locker recess handle only, Stainless steel construction.

Pop rivet for black trigger.

Superior List Industries Locker Finger Lift, Black.

Superior List Industries locker jamb spring only.

Right hand shown in picture. Facing the locker the hinges are on the right hand side. 5/8" hole spacing, 7/8" x 1" overall size. Also known as l145, li10095.

Superior List Industries Locker Hinge. Also known as 8022, 82004, LI1001, ls691.

Right hand shown in picture. Facing the lock hinges are on the Right Hand Side.

Superior List Industries Locker Lock Bar Rivet, 3/16" x 1/2". This plastic piece helps the lock bar riding vertical to stay in place.

All Steel Equipment Locker Latch Spring. Used with 115295 rivet.

All Steel Equipment Locker Rivet For latch spring 115293. Same as 5475.

All Steel Equipment Box Locker Latch. Also known as 10501, 77013, as8805, las105.

All Steel Equipment Locker Catch. Manufactured in the USA. Also known as 10503, 77012, as8806, las107.

All Steel Equipment Locker Handle Assembly, include case, lift and screws. All UnPlated. Hole spacing 3-3/8" on case portion, over all length 4-1/4". Also known as 10101, 5100, 77002, as8801, las102. These Handles are not Plated****

All Steel Equipment Locker Handle Manufactured in the USA. Overall length 5-3/16" and 1-1/2" between screws. Includes screws. Also known as 10103, 5050, 77001, as8802, las103.

All Steel Equipment Locker Hinge Clip. Also known as 11102, 3555, 77004, as8804.

All Steel Equipment Locker Hinge. Also known as 11101, 5300, 77003, as8803, las110.

All Steel Equipment Locker Door Jamb. Overall height 1-5/8". Also known as 10301, 5555, 77005, as8809, las109. Made in the U.S.A.

All Steel Equipment Locker Padlock Eye. Also known as 10701, 5075, 77006, as8810. Dimensions are 1-1/4" wide by 1-1/4" if flat. The bend is in half 5/8". The hole spacing is 3/4" with a 5/16" hole.

All Steel Equipment Locker Door Jamb. Overall height 2-1/8". Manufactured in the USA. Also known as 5580, 77007, as8811.

All Steel Equipment Locker Screw, 8-32x 3/8"self thread.

All Steel Equipment Box Locker Latch only.

Aurora Steel Product Locker Latch Only. Also known as 20501, 7220, 81016, au6606.

Aurora Steel Product Locker Latch Pin Only. Also known as 22003, 7811, 81013, au6606, lar216.

Aurora Steel Product Locker Lift Pin Only.

Aurora Steel Product Locker Latch Coil Spring Only. Also known as 21503, 7755, 81015, au6606, lar217.