Ives
-
Wall Bumper Heavy Duty WS402CVX
Ives Wall Bumper Heavy Duty WS402CVX
Features:
• Constructed in heavy-duty cast brass or aluminum base.
• Special retainer cup makes rubber tamper resistant.
• The WS402CVX unit is designed with a convex rubber bumper packed with screw and
drywall anchor.2-1/2" diameter with 1" projection
GJ50C- -
Wall Bumper Stop Heavy Duty WS401CCV
Ives Wall Bumper Heavy Duty WS401CCV
Features:
- Special retainer cup makes rubber tamper resistant.
- Constructed in heavy-duty cast brass or aluminum base.
- The WS401CCV unit is designed with a concave rubber bumper which avoids damage to ocks with projecting buttons, packed with wood screw and plastic anchor.
2-1/2" diameter with a 1" projection
GJ60C- -
Wall Bumper Stop WS407-CCV
The Ives Wall Bumper Stop WS407-CCV our economically price wall bumper. The metal ring is a wrought stainless steel, otherwise known as stamping. It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time. Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten. The bumper is 2-1/2" in diameter and projects out 1".
GJ60W- -
Wall Mounted Bumper WS11
Wall Mounted Bumper WS11
- Constructed in heavy duty cast brass.
- Hexagon section on unit aids in fastening unit when expansion shield is used.
- Replaceable rubber bumpers features off-set shoulder and threaded shank
that screws into body of unit.
Furnished with wood screws for drywall mounting.
GJWB11- -
Wall Mounted Door Holder / Stop WS20
Wall Mounted Door Holder / Stop WS20
- Constructed in cast brass or aluminum.
- Replaceable rubber bumpers feature off-set shoulder and threaded shank
that screws into body of holder. - Hinged strike furnished matches body material and finish.
Furnished wood screws for drywall mounting.
GJW20- -
Wall Mounted Door Holder / Stop WS45
Wall Mounted Door Holder / Stop WS45
- Constructed of cast brass, bronze or aluminum.
- Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position.
- A heavy rubber pad cushions the shock and absorbs the sound.
- With unit mounted on door and the strike on wall, vertical adjustment is available on body.
- The strike is adjustable 45 degrees left or right, both adjustments easily accomplished at time of installation or at a later date.
WS45 strike is furnished with wood screws for drywall mounting.
GJW45A- -
Wall Mounted Door Stop WS11X
Ives Wall Mounted Door WS11X
- Constructed in heavy duty cast brass.
- Hexagon section on unit aids in fastening unit when expansion shield is used.
- Replaceable rubber bumpers features off-set shoulder and threaded shank
that screws into body of unit.
Furnished with a threaded stud and expansion shield for
masonry type mounting. 2" diameter base by 3-3/4" projection.GJWB12- -
Wall Mounted Holder/Stop WS445
Wall Mounted Holder/Stop WS445
- Constructed in cast of brass or aluminum.
- Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike.
- Unit requires manual disengagement to release Hold-Open.
- Replaceable resilient, non-marring rubber tip.
WS445 is packed with expansion shield and lead shield for masonry type mounting.
GJW27- -
Wood Door Automatic Flush Bolt FB40
Wood Door Automatic Flush Bolt FB40
H.B. Ives FB40 Series are sold has Top, Bottom or in Pairs (top and bottom). Fully automatic, inactive door is latched when active door closes, bolts retract when active door is opened. Top Bolt has no spring tension. They are non handed, but the top and bottom bolts are different. The body size is 1" wide, 8-1/2" tall and 2" deep, the bolts have a 3/4" throw with a 7/8" vertical adjustment.
Ives Part #'s
FB41P - Pairs
FB41T - Top
FB41B - BottomFB40 -
Dust Proof Strike DP1
- Designed for use with the bottom bolt of all flush bolts.
- Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes. - Strike hole is 3/4" Diameter and 1-1/8" Deep
DP1 Face Plate: 1-7/16" Diameter
Body: 1-3/16" Diameter x 1-7/8" DeepDP1- -
Dust Proof Strike DP2
- Designed for use with the bottom bolt of all flush bolts.
- Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes. - Strike hole is 3/4" Diameter and 1-1/8" Deep
DP2 Face Plate: 1-5/8" W x 3-1/2" L x 1/8" Thick
Body: 1-3/16" Diameter x 1-7/8" DeepDP2-