Von Duprin Exit Devices
-
Von Duprin 9927 Rod Guide Assy
The Von Duprin 9927 Rod Guide is the latest version of the Guide. The guide includes the metal strap and the nylon bushing the rod slides through, a major improvement of the original version.
Works on all of the Von Duprin 98 and 9927's. Replaces the old style which had the cover and springs.
Von Durpin part # 112063
G99VR35- -
Von Duprin 9927 Top Latch
Von Duprin 9927 Top latch
Used on all the Von Durpin 9827 and 9927's. This latch updates your current latch if your device was installed before October 1998. If your device is newer that October 1998, then use the G050400. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050091
G99VR10 -
Von Duprin 9927 Top Vertical Rod
Von Duprin 9927 Top Vertical Rod
Please call if your door is higher than 7'1", The rod is field adjustable for doors up to 7'1". For larger doors, we have to order a Rod Extension which we do not show online yet.
Old Von Duprin part # 110573
New Von Duprin part # 050512G99VR30- -
Von Duprin 88 Active Case
Replacement Von Duprin 88 Rim Device Center Case
Includes all of the internal parts and hardware. This case works with all Exit Only, Dummy and Night Latch Trims. Call or email us if you have a Lever, Knob or Thumb Piece Trim.
Von Duprin Part # 050409
Old Part # 10166288R10 -
Von Duprin 050531 EL Dogging Rod 3'
Von Duprin 050531 EL Dogging Rod 3'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 3' designates the model it is used on. The 3' model is used on doors 36" or under. The Rod measures roughly 11" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices
Von Duprin Part # 050531, Old Part # 110007
G050531 -
Von Duprin 050532 EL Dogging Rod 4'
Von Duprin 050532 EL Dogging Rod 4'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 4' designates the model it is used on. The 4' model is used on doors 48" down to 36". The Rod measures roughly 17" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices. Use part # G050531 if your door is equal or under 36".
Von Duprin Part # 050532, Old Part # 110008
G050532 -
Von Duprin Exit Device 22, 33, And 99 Dogging Shaft 090040
The Von Duprin 22, 33, 33A, 98 and 99 dogging shaft is the current dogging shaft. And has been in production since 1998. If your device is from before 1998, then you would use the 050709. This is the piece that the dogging key would fit into. The shaft is for a 5/32" dog key. #4 on diagram
Von Duprin Part # 090040
G090040 -
Von Duprin Exit Devices 608/880/990TP Thumb Piece
Von Duprin Exit Devices 608/880/990TP Thumb Piece
Replace thumb piece only, rivet not included. Cast bronze construction, and then plated to the selected finish. 5-1/8" overall length, but note that the length is usually cut down in the field depending on the thickness of your door.
Von Duprin Part # 970488
Old Part # 960303G970488- -
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Replacement Grip/Handle only, screws not included. Cast bronze construction, and then plated to the selected finish. The Grip measures 15/16" wide by 6" long. The center to center hole spacing is 5-1/2". This handle works on the Von Duprin 608, 696, 880, and 990 outside trim plates.
Von Duprin Part # 972466 and 972467
Old Part # 969925 and 959122G972466-
