Windows| Truth

Awning Operator Guide Bar 30568

The Truth Operator Guide Bar measures 26-3/4" long with the two mounting holes at 26-1/8" on centers. The bar is constructed of extruded aluminum. The Wi10005 is the component that slides in this track. This track is mounted to the sash.

Truth Part # 30568

Truth Encore Single Arm Operator.

Truth Encore Dual Arm Operator for Low Profile windows.  Same as the Wi5010, but has a rectangular slide on the long arm instead of the standard models square slide.

The Truth 11577 is used on the Encore and Maxim Awning Operators, Models Wi5100 (51.00) and Wi5110 (51.10). The operator is attached to the track by the 11647 Slide Shoe. The track measures 16 inches long by 5/8 inches wide and 5/16 inches deep.

The Truth Maxim 32384 Track is used on for the 50.00, 50.10 and 52.01 operators. The track is unique so the square slide 31877 fits in there perfectly.  The track measures roughly 14-7/16" long with 4 mounting holes

The Truth 22.18 Front Mount Awning Operator spreads 20-1/8 inches pin to pin on the arms when it is in the closed position. The Front Mount hole spaceing is 7 inches on the outside holes and 6 1/8 inches on the inside holes.

The Truth 50.60 Encore Dyad Operator has been in production since about 1999.   In the beginning Truth offered the Maxim and the Encore Systems.   The Maxim is being phased out and the Encore is the only one made now.   The Encore will replace all of the Maxim operators, and have the same hole spacings and operation, but they have the interchangeable handle and covers.

The Operator in the Picture is a Left Hand.

Window Operator Handing

Truth 11" Surface Rear Mounted Operator

This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller.

The Truth 13.17  has a track length of 26" and is used on Awnings Windows. Sold in right and left sets, so you get enough hinge to do one window.

The Truth Entrygard 10583 Left Hand Bracket measures 2-3/4" x 1-3/8" x 1/2".  The mounting holes are 1-5/8" on center.

The Truth Entrygard 10584 Right Hand Bracket measures 2-3/4" x 1-3/8" x 1/2".  The mounting holes are 1-5/8" on center.

The Truth-Wright Split Arm Operator is a replacement for the older Wright Operators.  Linkage arm has an overall length of 3-5/8".

Left Hand Shown in Picture, we can only get these in white.

The Truth Encore Handle and Cover are used on the Encore Operators Wi5110 and Wi5010.  The cover are constructed on Plastic and the Handles are die cast metal.  The ones shown on the website are Right Hand and the color is Bronze.  Once color is selected and hand, the different hands will appear, the color is not correct.

Truth Part Numbers 12614 (Left Hand) and 12616 (Right Hand).

Color Chart

Roto Casement Sash Lock

Housing measures x 4-3/4" tall by x 3/4" wide. The hole spacing is 3-15/16" center to center. The lifting finger projects out 1-1/8"" with the cut out measuring 11-16" deep by 5/16".

Truth Entrygard 10795 Left Hand Bracket

This bracket is usually used on the Entrygard Dual Arm Operators. This bracket is what the linkage arm attaches to on the hinge side of the with.

Truth Entrygard 10796 Right Hand Bracket

This bracket is usually used on the Entrygard Dual Arm Operators. This bracket is what the linkage arm attaches to on the hinge side of the with.

Truth 20237 Offset Window Strike only comes in Black.

Used on the 20231, 20232 and 20233 Strike Insert

Notice how the mounting screws are offset on the strike.

Truth 20236 Inline Strike Housing

Used on the 20231, 20232 and 20233 Strike Insert

Notice how the mounting screws are centered on the strike.

Angle Base 1-3/8" Window Handle Truth

Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820

Right Hand is shown in picture.

Truth 16.52 Sash Lock. A very common sash lock that tends to fail because the plastic slide breaks due to incorrect installation at the window manufacturer or being forced when there is a obstruction in the window opening. The new replacement model has a thicker plastic slide. Because the slide is thicker, the keeper, part # Wi41268 and Wi41269 might have to be shimmed with small washers.

Common numbers found on this sash lock are 21328 and 45189

Non handed (can be used on right or left hand windows).

Truth 16.27 Sash Lock. Sometimes known as the Truth Entrygard Sash Lock.

3" high x 2-9/16" deep x 1" thick.  We sometimes find the numbers 45208 or 40707 cast into this part.

Left hand sash lock shown in picture.

2-3/8" between screws

Truth 17.32 Sweep Latch

This Truth Trimline Cam Lock features a 2-1/16" hole spacing, and the distance from the center of the screw hole and the lock face is 3/8". This sweep lock is also known as a Window Cam Lock, or Double Hung Window Lock.

Truth/A.W. Anderberg 222SS 4 bar Egress Window Hinge

Used on larger casement windows to provide egress through the window.

Sold individually, these hinges are non handed

Truth/A. W. Anderberg part #35.09.00.100

Truth 14.17 Casement Hinge-Pair

The 14.17 is not that popular of a hinge. But if your track measures 14" than this is probably what you have. The hinge has a stack height of 7/16". The outside screw holes measure 12-3/8" on center. We sometimes find the number 30986 on the arm and 41498 and 41499 on the stainless steel track.

This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.

Truth Awning Window Hinge 13.13

10" Track Length

common number found stamped on this hinge are 30122A, 30121 and 31701

This hinge is sold in pairs, you get a left and right

Truth Window Hinge 14.97 Maxim

Common numbers found on this hinge are 31862, and 31858

This hinge has been manufacturered since 1999

sold in pairs (top and bottom)

Truth Window Hinge 14.12 Maxim Egress

Common number found on this hinge are 31861 and 32062

This hinge has been manufacturered since 1999.

Sold in Pairs

The Truth 14.80 hinge is the most common of the Truth Stainless Steel Casement Hinges. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.

This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.

Truth 14.77 Egress Casement window hinge. This hinge does the same thing as the Wi1475, but the window only travels 2-9/16" into the opening. This hinge is designed to meet Building Egress Code Requirements.

Common numbers found on this hinge are 30463, 30818, 40942 and 40941

Sold in pairs (top and bottom)

The Truth 14.75 hinge is the most common of the Truth Casement Hinges. The stainless steel track is 10" long, the glide is a plastic coated steel. The most common problem on this hinge is the shoe. When the hinge is installed incorrectly or not maintained the shoe could pull out the window track. Common numbers found on this hinge are 30744B, 31133C, 40942 and 40941.

This Truth hinge is used on the Wi1510, Wi1511, Wi1516, Wi1518, Wi1531, Wi1532, Wi1594 and Wi2301.

This hinge is sold in pairs (one top and one bottom). If your window is the opposite hand, the top hinge goes to the bottom and the bottom hinge goes to the top.

Truth 10.10 Lever Operated Awning Window Operator.

More than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth 10.10 Lever Operated Awning Window Operator.

Less than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth 10.11 Lever Operated Awning Operator.

Handle assembly projects less than 2"

Truth 10.11 Lever Operator Awning window operator.

Handle assembly projects more than 2"