Manufacturers| American Sanitary Toilet Partition
We are leading bathroom stall door hardware distributors. We sell bathroom stall door hardware that was manufactured by top name brands in the bathroom stall hardware commercial market today.
If you are working on renovating a commercial bathroom in a public building, you’ll want to be sure you’re using toilet stall door hardware that was produced by highly regarded stall manufacturers. This will ensure that the bathroom partition hardware that you use is tough and damage resistant for the long haul.
At Robert Brooke & Associates, we want your shopping experience to be a cinch. That’s why we have a website where you can order bathroom stall parts online from the cozy setting of your home or office.
Our warehouse and office location is Troy, Michigan, but we ship toilet partition hardware across the United States and to Canadian locations. Check the Lead Time to see if your item is in stock at our warehouse to get a rough estimate of when it will ship and then place your order. We will get started on putting together your shipment ASAP whether we currently have the items that you need at our warehouse or they are only currently available at the manufacturer’s factory.
Toilet Stall Hardware Manufacturers
Below you will find a list of the manufacturers we work with. You can gather some important info about these brands by visiting their webpage. If you already know the name of the brand that makes the bathroom stall door hardware that you need for your renovations or repairs, then you’re already halfway there.
- Accurate bathroom stall parts
- All American toilet stall door hardware
- American Sanitary stall parts
- Ampco toilet stall door hardware
- Bobrick toilet stall door hardware
- Fiat toilet stall hardware
- Flush Metal bathroom stall parts
- General bathroom stall parts
- Generic (non-brand) bathroom stall door hardware
- Global bathroom stall door hardware
- Hadrian bathroom stall door hardware
- Hiny Hiders partition parts
- Knickerbocker partition parts
- Metpar bathroom stall door hardware
- Mills partition parts
- Sanymetal bathroom stall hardware
Bathroom Stall Door Hardware Sold Online
Have you seen our extensive online selection of toilet stall hardware? You will undoubtedly have plenty of options when choosing the most suitable restroom stall door hardware for your restroom project.
Our restroom stall door hardware consists of assorted parts that will come in handy when refurbishing a public restroom or replacing a worn-out stall part in a commercial restroom. Our supply includes hinges, latches, keeper bumpers, pintles, hinge pins, hinge cams, hinge repair kits, coat hooks, pilaster shoes, door pulls, door stops and more restroom stall door hardware made by prominent manufacturers in the restroom stall industry.
Restroom Stall Door Hardware Distributors
Our company has been supplying dependable bathroom stall door hardware for more than 40 years. We have built a team made up of highly qualified and experienced professionals who have expertise in the bathroom stall hardware commercial industry.
Our team has worked with many businesses and organizations such as athletic facilities, educational institutions, convention centers and warehouses to name a few. We love providing bathroom partition hardware that our customers can feel confident when using to make necessary repairs to the commercial restrooms they are fixing up.
Our experts are hard at work supplying our customers with the best stall hardware made by respected bathroom stall part manufacturers, but we will always take the time out to assist you when you have an order question. You are welcome to contact us at Sales@RobertBrooke.com or at 1 (800) 642-2403 about your order of toilet partition hardware from our site if you require any type of assistance.
-
American Sanitary Slide Bolt Latch
American Sanitary Slide Bolt Latch Chrome Plated.
Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.
Shipped with mounting screws.
9AM500 -
American Sanitary Keeper Bumper Inswing
American Sanitary Toilet Partitions Keeper Bumper For 1-1/4" Inswing Square Edge Pilaster Or Post
Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110
Shipped with mounting screws.
9AM450 -
American Sanitary Top Hinge
American Sanitary Toilet Partition Top Hinge For 1-1/4" Square Edge Pilaster Or Post
Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a American Sanitary Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3790
A=1-5/8"
9AM175 -
American Sanitary Top Hinge Pin 3/8" x 3-1/4"
American Sanitary Top Hinge Pin For Laminate Partitions
Threaded steel construction. The top pin measures 3/8" diameter by 3-1/4" long with 5/16-18 threads. It has a screw driver flat slot on one end. Also known as a Bathroom Stall Door Top Hinge Pin. Manufacture part # 98584.
9AM125 -
American Sanitary Top Hinge Insert Escutcheon
American Sanitary Partitions Top Hinge Door Insert For 1"
Chrome plated Zamac die cast construction. The hinge insert outside dimensions are 2-3/16" wide by 1-5/32" deep by 1-13/16" high. The two holes have a diameter of 13/32". Also known as a Bathroom Stall Door Insert Top 1". Manufacture part # 2400.
9AM150 -
American Sanitary Nylon Cam
American Sanitary Partitions Nylon Cam
Natural nylon construction. The nylon cam head diameter is 7/8" with an inside diameter of 11/16". The cylinder diameter is 3/4" and has an overall length of 1-11/32". For use with a 5/8" diameter pintle. Also known as a Bathroom Stall Door Hinge Cam. Manufacture part # 98245.
9AM220 -
American Sanitary Bottom hinge Insert For 1 Door
American Sanitary Partition Bottom hinge Insert For 1" Door
Chrome plated Zamac die casting. The door insert outside measurements are 2-5/16" wide by 1-5/32" deep by 1-3/16" tall. The inside dimensions are 1" and the hex hole measures 3/4". The round hole measures 5/16". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 2490
9AM240 -
American Sanitary Pintle 5/8"
American Sanitary Pintle 5/8" Diameter
Steel and white nylon construction. The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175.
Shipped with nut and lock washer.
9AM270 -
American Sanitary Bottom Hinge
American Sanitary Toilet Partition Bottom Hinge For 1-1/4" Pilaster Post Chrome
Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a American Sanitaryl Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3290
Shipped with mounting screws.
a=1-5/8"
9AM280 -
American Sanitary Coat Hook Bumper
American Sanitary Partitions Coat Hook Bumper
Chrome plated Zamac die casting construction. Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4000.
9AM325 -
American Sanitary Keeper Bumper
American Sanitary Partitions Keeper Bumper For 1-1/4" Outswing Square Edge Pilaster Or Post
Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210
Shipped with mounting screws.
9AM415
