Manufacturers| Sanymetal Toilet Partition
We are leading bathroom stall door hardware distributors. We sell bathroom stall door hardware that was manufactured by top name brands in the bathroom stall hardware commercial market today.
If you are working on renovating a commercial bathroom in a public building, you’ll want to be sure you’re using toilet stall door hardware that was produced by highly regarded stall manufacturers. This will ensure that the bathroom partition hardware that you use is tough and damage resistant for the long haul.
At Robert Brooke & Associates, we want your shopping experience to be a cinch. That’s why we have a website where you can order bathroom stall parts online from the cozy setting of your home or office.
Our warehouse and office location is Troy, Michigan, but we ship toilet partition hardware across the United States and to Canadian locations. Check the Lead Time to see if your item is in stock at our warehouse to get a rough estimate of when it will ship and then place your order. We will get started on putting together your shipment ASAP whether we currently have the items that you need at our warehouse or they are only currently available at the manufacturer’s factory.
Toilet Stall Hardware Manufacturers
Below you will find a list of the manufacturers we work with. You can gather some important info about these brands by visiting their webpage. If you already know the name of the brand that makes the bathroom stall door hardware that you need for your renovations or repairs, then you’re already halfway there.
- Accurate bathroom stall parts
- All American toilet stall door hardware
- American Sanitary stall parts
- Ampco toilet stall door hardware
- Bobrick toilet stall door hardware
- Fiat toilet stall hardware
- Flush Metal bathroom stall parts
- General bathroom stall parts
- Generic (non-brand) bathroom stall door hardware
- Global bathroom stall door hardware
- Hadrian bathroom stall door hardware
- Hiny Hiders partition parts
- Knickerbocker partition parts
- Metpar bathroom stall door hardware
- Mills partition parts
- Sanymetal bathroom stall hardware
Bathroom Stall Door Hardware Sold Online
Have you seen our extensive online selection of toilet stall hardware? You will undoubtedly have plenty of options when choosing the most suitable restroom stall door hardware for your restroom project.
Our restroom stall door hardware consists of assorted parts that will come in handy when refurbishing a public restroom or replacing a worn-out stall part in a commercial restroom. Our supply includes hinges, latches, keeper bumpers, pintles, hinge pins, hinge cams, hinge repair kits, coat hooks, pilaster shoes, door pulls, door stops and more restroom stall door hardware made by prominent manufacturers in the restroom stall industry.
Restroom Stall Door Hardware Distributors
Our company has been supplying dependable bathroom stall door hardware for more than 40 years. We have built a team made up of highly qualified and experienced professionals who have expertise in the bathroom stall hardware commercial industry.
Our team has worked with many businesses and organizations such as athletic facilities, educational institutions, convention centers and warehouses to name a few. We love providing bathroom partition hardware that our customers can feel confident when using to make necessary repairs to the commercial restrooms they are fixing up.
Our experts are hard at work supplying our customers with the best stall hardware made by respected bathroom stall part manufacturers, but we will always take the time out to assist you when you have an order question. You are welcome to contact us at Sales@RobertBrooke.com or at 1 (800) 642-2403 about your order of toilet partition hardware from our site if you require any type of assistance.
-
-
Sanymetal Keeper Bumper Concealed
Sanymetal Toilet Partition Keeper Bumper For Concealed Latches 1-1/4" Round Edge Post
Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510.
Shipped with mounting screws.
9S8801 -
Sanymetal Keeper Bumper For Concealed Latches Inswing/Outswing
Sanymetal Partitions Keeper Bumper And Strike For Concealed Latches Inswing/Outswing 1-1/4"
Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a1/2" thick and the slot is 7/16" deep. The opening to mount it on the pilaster or post is 1-1/4" by 1-1/4" This Strike and Keeper are for square post or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5960
Shipped with screws for mounting.
9S8861 -
Sanymetal Coat Hook Bumper
Sanymetal Coat Hook Bumper 3" Projection
Chrome plated Zamac die cast construction. The coat hook base measures 2" by 1-11/16" with a 1-1/8" hole spacing. The hook projects out 1-13/16". The bumper projects out 3" with a rubber insert on the tip. Also known as a Bathroom Stall Hook. Manufacture part # 4280.
Shipped with mounting screws.
9S7810 -
Chrome Plated Slide Bolt Latch 9/16" Bar To Door Clearance
Chrome Plated Slide Bolt Latch 9/16" Bar To Door Clearance
Zamac die cast construction with polished chrome plating. Base is 3-3/8" high with 2-5/8" hole spacing. Latch bolt is 3-1/8" long by 7/8" wide by 3/16" thick with a 9/16" dimension from the door to the under side of the latch bolt. The latch projects out 1-1/2" when installed on the door. Also known as a Bathroom Toilet Stall Door Slide Latch and Toilet Partition Locks. Manufacture part # 6540.
Shipped with mounting screws.
9S7431 -
Sanymetal Coat Hook Bumper
Sanymetal Partitions Coat Hook Bumper
Chrome plated Zamac die casting construction. Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4000.
9S6810B -
-
Inswing Keeper For Throw Ltc For 1-1/4" Sq Post
Inswing Partition Keeper Bumper For Throw Latch For 1-1/4" Sq Post
Zamac die cast and polished chrome plate construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 13/16" high by 1/4" deep. Commonly known as a Bathrrom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5340
Shipped with mounting screws.
9S410T -
Sanymetal Door Stop
Sanymetal Partitions Door Stop For Inswing/Outswing Flat
Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5170.
Shipped with mounting screws.
9S2704 -
Keeper For Throw Latch
Toilet Partition Keeper For Throw Latch Inswing Flat
Polished chrome plated Zamac construction. Keeper base is 2-1/2" high by 1-3/16" wide with a 1-1/2" hole spacing. Strike is 2-1/2" tall by 7/8" deep. The material 1/8" thick. The slot is 13/16" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5180.
Shipped with mounting screws.
9S2701 -
Chrome Plated Ada Throw Latch 3-1/2" Screws
Chrome Plated Partition Ada Throw Latch 3-1/2" Between Screws Latch Only
Chrome plated brass construction. Base is 4-1/2" wide by 1-1/2" high by 3/16" thick. Throw latch is 3-11/16" long by 3/4" x 3/16" thick. The latch projects from the stall door 1-3/8". Also known as a Bathroom Stall or Toilet Partiton Throw Latch. Manufacture part # 5151
Shipped with mounting screws.
9S7531 -
Sanymetal Keeper 2 Between Screws
Sanymetal Partition Keeper 2" Between Screws Inswing Flat
Polished chrome plated Zamac construction. Keeper base is 3" high by 1-1/16" wide with a 2" hole spacing. Strike is 3" tall by 7/8" deep. The material 1/8" thick. The slot is 1-1/8" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5130.Shipped with mounting screws.
9S2401
