Search results for: 'screen door hardware latch seri long call urin'
-
Stair Tread Neoprene Contact Cement 400 Series
For bonding to all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo steps. A rapid drying, long range contact cement; specially formulated for Musson stair coverings. Brush on application; use on back of treads and back of nosing. Contains solvents, extremely flammable. 1 gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 5 gallon containers.
If ordering the gallon or 4 gallon pail, it will ship via freight truck. If you would prefer something that ships Fed Ex Ground, please order the 300 Stair Tread Adhesive.
400AHD -
400 Series Vinyl Stair Treads
400 Vinyl Stair Treads
Heavy gauge sharp-rib design Koroseal vinyl treads for heaviest traffic; 1/4" thick at wear area, easily trimmed to cover and fit any stair step. Install over concrete, metal, wood, terrazzo. Extra heavy thickness at the front "wear area". Meets Fed. Specs. RR-T-650E Type B. They are designed for interior use.
SPECIFICATIONS:
No. 400 Koroseal vinyl rib design stair treads 1/4" thick 12" deep; 1-1/4" square nose; contains no asbestos fiber; made of first quality homogeneous vinyl, color throughout thickness; free from imperfections which might lesson serviceability. Select standard length of 24", 30", 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid colors of Brown, Sand, Gray or Black.
VST400 -
300 Series Vinyl Stair Treads
Description
This is a very good stair tread, but not one of our favorites. The nose on this vinyl stair tread is difficult to work with in some applications. Because the nose has substantial material (thickness) it is tricky to work with. We can send you a sample, so you can see how it fits on your step. It is our lowest cost protection for stairs of homes, duplexes and apartments. Features extra heavy snap-on nose that fits either square or curved nose wood steps that are between 3/4" and 1-1/8" thick. Made in the USA.
SPECIFICATIONS:
- Koroseal vinyl rib design stair treads
- Thickness: 1/8"
- Depth: 9-5/8"
- Snap on nose
- Sizes available: 18", 24", 30", 36", 42", 48" or 72"
- Colors available: Brown, Black
VST300 -
300 Series Stair Tread Adhesive
A non-solvent based alternative to install rubber and vinyl stair treads and cove risers to concrete, wood, terrazzo, metal or marble. One gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 4 gallon containers.
300ADH -
560 Series Rubber Flooring Adhesive
For installing Rubber Floor Tiles or Rolls over suitable on-grade dry concrete floors, suspended concrete floors, or suspended wood floors. May also be used with sanded back molded rubber stair treads. Not recommended where excessive moisture exists; Non-Carcinogenic; Non-Toxic; safe for the environment and freeze thaw stable. See label for complete instructions. Ready to trowel in 1 gallon or 4 gallon cans. Covers 150 square feet per gallon.
560 -
Vinyl Backed Cocoa Mats 19 mm Thick
VINYL BACKED COCOA MATS
Vinyl-Back Cocoa Mats in Natural Golden Tan color provides safe leak proof brush action cleaning. All natural fibers from the outer husk of the coconut are fused into a vinyl backing by a unique process to create an extremely long wearing and efficient shoe cleaning surface. The vinyl-back allows trimming to fit any size or shape entrance; is skid proof, lays flat, stays in place. Tan color is colorfast. Ideal for use in recesses; cropped bristles give excellent scraping action.These mats clean grit and moisture from shoes, dry rapidly; won't mildew or rot. Mats do not generate static electricity. Mats can be easily vacuumed or washed with mild soap. Available in 15 mm (.59 inches), 19 mm (.748 inches) or 30 mm (1.18 inches) thick.
Pricing shown below is for the 19 mm thick mats. Also available in 15 mm and 30 mm thicknessCustom sizes are available, call or email for pricing
COCOA -
Vinyl Backed Cocoa Mats 15 mm Thick
VINYL BACKED COCOA MATS
Vinyl-Back Cocoa Mats in Natural Golden Tan color provides safe leak proof brush action cleaning. All natural fibers from the outer husk of the coconut are fused into a vinyl backing by a unique process to create an extremely long wearing and efficient shoe cleaning surface. The vinyl-back allows trimming to fit any size or shape entrance; is skid proof, lays flat, stays in place. Tan color is colorfast. Ideal for use in recesses; cropped bristles give excellent scraping action.These mats clean grit and moisture from shoes, dry rapidly; won't mildew or rot. Mats do not generate static electricity. Mats can be easily vacuumed or washed with mild soap. Available in 15 mm (.59 inches), 19 mm (.748 inches) or 30 mm (1.18 inches) thick.
Pricing shown below is for the 15 mm thick mats. Also available in 19 mm and 30 mm thicknessCustom size available, call or email for pricing
COCOA-15- -
355 Vinyl Stair Treads
This is another of our favorites. This vinyl stair tread features a longer nose, so the front edge of the step is covered on a standard 2 x 12 plank step. This tread is idea for the type A personality person how wants everything perfect and covered. Applications for this tread are residential, multi-family dwellings, apartment houses, and low income housing. These treads are easy to cut, clean and install. They are designed for interior use. Made in the USA.
Features:
- Extra long square nose
- Easy installation
- Easy clean
- Meets Fed. Specs. RR-T-650E Type B
- Contains no asbestos fiber
- Made of first quality homogeneous vinyl
- Color throughout thickness
- Free from imperfections which might lessen serviceability
Specifications:
- 355 Koroseal vinyl rib design stair treads by Musson Rubber
- Thickness: 1/8"
- Depth: 12"
- Nose: 1-3/4"
- Sizes available: 18", 24", 30", 36", 42", 48", 54", 60", 72", 84", 96"
- Colors available: Brown, Sand, Gray, Black
VST355 -
Aluminum Nosing 2 inch with Grit Surface
This 2-1/2" deep nosing is made from the same material as our Grit-Surface Aluminum Treads. The front edge is 1-3/4" deep (inside nose dimension is 1-1/4"). The nose has a 1-3/4" wide abrasive finish with a 3/4" tapered aluminum back edge. Both the nose and tapered edge have a 1/4" wide reflective yellow safety tape strip for additional safety. The nosing is available in abrasive colors of Black, Brown, Blue, Gray, Green, Red or Yellow. Nosing is available solid (for glue-down applications) or with countersunk holes (for screw-down applications) every 12". Nose drops 1-1/16".
SPECIFICATIONS:
Furnish and install Musson Grit-Surface Aluminum Nosings, 3/16" thick X 2-1/2" deep; cut lengths up to 10 foot long. Tread surface shall have aluminum oxide abrasives permanently bonded to a heat treated aluminum nosing with 1/4" wide reflective yellow safety strip on both the top surface (between the grit surface and aluminum) and the nose. Grit surface shall be in one of the following standard colors: Black, Brown, Blue, Gray, Green, Red or Yellow. Nosings can be supplied with two countersunk holes every 12" for screw down installation or without holes for installation with our #400 Neoprene Contact Cement.
Custom sizes are available up to 10' long
GSA2N- -
Specta Deluxe Olefin Carpet Mats
Plush and durable, this olefin cut pile carpet mat helps wipe shoes clean at the entryway. Reap benefits from the many features of this long wearing carpet mat; save money on maintenance costs. Solution-dyed olefin yarn preserves the attractive color appearance.
- 17 oz. of 100% continuous filament olefin yarn per square yard fused to a 65 mil durable solid vinyl back.
- Provides superior wiper service, ultimate floor protection, reduces maintenance.
- Traps over one gallon of water per square yard; dries faster than conventional carpet mats to lessen slippery hazard.
- Repels stains to maintain mat’s original beauty; clean with vacuum, hose or broom.
- Made in the U.S.A.
- SPECTRA-DELUXE MATS—approx. 1" vinyl border on all four sides.
SDxxx- -
Fluff-Cord Strip Tile - Continuous Strip
FLUFF-CORD STRIP TILE-CONTINUOUS STRIP
A close-nap carpet-like surface of specially processed rubber-fabric strips made from recycled heavy-duty truck and bus tires; Natural Earthtone Gray Color. Strips are heat bonded to a woven flexible backing. This creates a "dry-back" adhesive back that reacts with our non-flammable adhesive to form a stronger bond to the floor. Install this permanent entry floor mat inside or outside; cord strips act as a wiper where dirt or moisture is a problem; are non-skid, non-absorbing, resist shrinkage, deaden sound. Ideal for heavy wear areas in shopping centers, lobbies, entryways, ramps, airports, etc. Produced in longitudinal rolls 12" wide x 25' long.
Tile must be installed using manufacturer's specific installation instructions and Musson No. TT-390 Non-Flammable Environmentally Safe Adhesive.
Order Fluff-Cord Strip Rolls here
TT-12-25- -
Road Roller Matting
VINYL BACK COCOA MAT ROAD ROLLERS
Road roller mats are made with fibers from the almost indestructible outer husk of the coconut. These fibers are bonded into a vinyl backing. These vinyl back Road Roller Mats can be installed much easier than woven mats and can be easily cut to fit without the mat unraveling. If small holes are needed for installation, a sharp knife or punch will easily do the job.
Rollers are 32' 9" long and around 1-3/16" thick
RRXR -
Koroseal Vinyl Butt Type Nosing No. 101
Ribbed Koroseal Vinyl butt-type nosing for front edge of stages, bowling lane steps, platform-like floors and bar foot rests. Grooved cutting guides provide “cut-offs” to match flooring thickness. Standard 8’ lengths; easily cut to size. Install with #400 Neoprene Contact Cement or #300 Water-based Contact Adhesive.
SPECIFICATIONS:
Furnish and install No.101 Heavy Duty Koroseal Vinyl Ribbed Butt-Type Nosing; 3-1/2” deep; 1-5/16” nose depth; square adjusta-nose. Cut nosing at proper guide to butt against 1/8” (or 3/16” or 1/4”) flooring. Select from standard colors of black or brown.
Shipping - Due to shipping restrictions, this product ships in two 48" long pieces.
G101 -
375 Vinyl Stair Treads
Designed for use in apartments, urban renewal housing, housing for the elderly and housing projects. Lower initial cost, ease of installation and cleaning, and long service appeals to owner and builder. Extra thick at front; Meets Fed. Specs. RR-T-650E Type B. They are designed for interior use.
Features:
- Extra thick at front
- Easy installation
- Easy clean
- Meets Fed. Specs. RR-T-650E Type B
- Contains no asbestos fiber
- Made of first quality homogeneous vinyl
- Color throughout thickness
- Free from imperfections which might lessen serviceability
Specifications:
- 375 Koroseal vinyl rib design stair treads by R.C. Musson
- Thickness: 3/16"
- Depth: 12"
- Nose: 1-1/4" square or curved
- Sizes available: 18", 24", 30", 36", 42", 48", 54", 60", 72", 84", 96"
- Colors available: Brown, Sand, Gray, Black
VST375 -
DR-CT Diagonal Rib Carpet Tiles
DR-CT DIAGONAL RIB CARPET TILES
An attractive and functional entrance matting alternative; heavy duty modular carpet tile with excellent scraping and dirt removal properties for high traffic areas. Designed for interior use in entrances, vestibules, lobbies, between double doors, on ramps or in elevators.Install in a recess or on the surface. Our easy release adhesive allows you to remove worn or damaged tile which is easily re-adhered. Tile can be switched to decrease traffic patterns; lasts longer, looks better. Vinyl or Aluminum beveled edging available.
3/8" thick; 19-11/16" x 19-11/16" square tile; diagonal rib pattern woven of 100% polypropylene pile yarn with a bitumen backing.
SPECIFICATIONS--No. DR-CT
DR-CT Diagonal Rib Carpet Tiles made of 100% polypropylene pile yarn with a bitumen backing in areas as indicated on drawings. Tile shall be of first quality commercial grade carpet, free of surface defects. Install tile in an alternating rib parquet pattern in indicated recess with recommended easy release adhesive, (or on surface area using vinyl edging or aluminum beveled frame). Tile shall be 3/8" thick, 19-11/16" x 19-11/16" square carpet tile. Select from standard carpet colors of Cranberry, Blue, Beige, Teal, Gray, Chocolate or Charcoal.
one DR-CT Diagonal Rib Carpet Tile covers 2.69 square feet
DR-CT