The Truth Operator Guide Bar measures 26-3/4" long with the two mounting holes at 26-1/8" on centers. The bar is constructed of extruded aluminum. The Wi10005 is the component that slides in this track. This track is mounted to the sash.
This plastic clip was used to hold the older version Guide Bar or Track. The piece measures 3/4" wide, by 5/8" high, with an 11/16" projection. The clip is made of plastic.
This nylon guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
This nylon guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
Replacement Hex Ball Drive for the Truth Telescoping Pole Crank. Hex Ball measures 11/16", overall length is 1-15/16" including female insert that fits into pole. The insert spline is 11/32" with a 1/2" diameter.
This nylon guide is used when you have multiple sash locks on your window. Inside the window, or sometimes on the surface these nylon guides keep the connecting rods in place, so you only have to actuate one lock to lock multiple locks.
The track measures 14" long, and is 11-16" wide. The stack height is 1/2". The arm marked 30128 is 6-3/4" long. And the arm stamped 30127 is 8" long. This hinge is constructed of steel that is powder coated in a tanish gray color. The common numbers found stamped on this hinge are 30128 and 30127
Also known as the Truth 25.39, this handle is constructed of a die cast metal and powder coated to the desired color. The distance between the screws is 1-3/8" on center. The handle measures 3-3/4" long, base measures 2-1/8" long. The number found on the handle is 45086 for the Right Hand, and 45085 for the Left Hand. We also find U.S. Pat. # 4,930,820
The Truth Encore Handle and Cover are used on the Encore Operators Wi5110 and Wi5010. The cover are constructed on Plastic and the Handles are die cast metal. The ones shown on the website are Right Hand and the color is Bronze. Once color is selected and hand, the different hands will appear, the color is not correct.
Truth Part Numbers 12614 (Left Hand) and 12616 (Right Hand).
The Truth 22.18 Front Mount Awning Operator spreads 20-1/8 inches pin to pin on the arms when it is in the closed position. The Front Mount hole spaceing is 7 inches on the outside holes and 6 1/8 inches on the inside holes.
Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.
Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.
Truth 24.31 casement window sash lock. The hole spacing is 3-13/16" and the "Fork" projects out 1-7/8". Housing is made of die cast metal that is then powder coated.
The Truth 11577 is used on the Encore and Maxim Awning Operators, Models Wi5100 (51.00) and Wi5110 (51.10). The operator is attached to the track by the 11647 Slide Shoe. The track measures 16 inches long by 5/8 inches wide and 5/16 inches deep.
Housing measures x 4-3/4" tall by x 3/4" wide. The hole spacing is 3-15/16" center to center. The lifting finger projects out 1-1/8"" with the cut out measuring 11-16" deep by 5/16".
The Truth 23.49 is a Dyad Operator is rear mounted. The linkage arm is 9-1/4 inches overall length, 8-3/4 inches hole to hole. The rear mounting holes are 5 inches on centers.
The Truth 11.10 Awning Operator is the most common of all the Truth Awning Operators. The arms stretch 21-1/2" in the closed position. If you arms stretch 16-1/8" order Wi1112. If your arms stretch 11-3/8" order the Wi1130.
Common numbers sometimes found on this operator are 40510, 40511, 31703 30895, 30895a and 31704. You may see just one or a couple of them on it.
The Wi11454 handle in matching color is included with the operator along with the Sash Hook Wi20008.
Truth Entrygard Dual Arm Operator. We would expect you to find 20748 on the linkage arm, which measures 2-7/8" overall length. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, and 20748. Call or email for quantity "Discount Codes".
2-7/8" linkage dimension, off set up.
Order Wi1516 if your link dimension is 3-3/4" stamped 20755. Order Wi1510 if your link dimension is 4-7/16" stamped 20810.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Replacement Pole Hook Drive for the Wi10637 for the Truth Telescoping Pole Crank. The Hook Adapter measures 1" wide, overall length is 2-3/8" including female insert that fits into pole. The insert spline is 11/32" with a 1/2" diameter.
Wi126XX
