Search results for: 'circa 1990 creat wood db hini pella window ca'
-
Monarch 19-V Exit Device
Monarch 19-V Exit Device
Hand: Field reversible.
Functions: All functions built into “EO” device.
Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313;
Latchbolt: Top stainless steel 3⁄4" throw. Bottom square bolt 1⁄2" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
Stock Sizes: 3'0" and 4'0"
Doors: 13⁄4" thick, wood or metal.
Narrow Stile Doors: To 1-3⁄4" N.S. aluminum. With control trim–2-1⁄4" min. stile.
Projection: 2-1⁄2" max., 1-7⁄8" dogged.36" device is only 33-1/2" wide
48" device is only 43-1/2" wideG19VEO- -
International 7300 Rim Device
International 7300 Rim Device
Modern flat touch bar Rim Panic exit device. This series offers durability, safety and meets the security demand and access control needs of today. Series 7300 Rim Panic exit devices are used with Narrow, Medium and Wide aluminum door and Hollow Metal and Wood Door applications. Series 7300 is non-handed, Field Reversible for LHRB or RHRB doors. Outside Unlatching and Dogging by Cylinder Key or Dogging by Hex Key in Touch Bar. Standard Units for 36” and 48” in widths (cut bar to fit). Can be used on 30” wide doors.
7301- -
Wall Clock Guard
Wall Clock Guard 17" Clock Guard Hexagon, Aluminum. Use with 16" Atomic Clock Selling Atomic Clocks for the past 20 years. Atomic clocks are designed to keep accurate time by using the governments signal in Boulder Colorado which resets all the atomic clocks all over the USA every night. Double sided ceiling or wall hung clocks are great for the hallways of schools, churches or hospitals. 14" and 16" wall hung clocks are great for classrooms and even gyms. The clock guard is perfect for your school's gym clock guard to protect your atomic clock. We do not recommend using in basements with no windows. It is best to have above ground with a window for better reception.
GUARD18 -
Truth Split Arm Operator 15.30
Truth Split Arm Operator 15.30
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
Left hand shown. Coppertone only, White is no longer available
Common numbers found on this operator is 31850
WI1530 -
Comtec 8 inch Wrap Around Hinge Set
Comtec Toilet Partition 8" Wrap Around Hinge Set. Clear anodized aluminum for 1" panel and 1" door. Used by every Bathroom Toilet Stall manufacture on Solid Plastic Toilet Partitions Doors. Sometimes known as part numbers, 7978, 7988, 8974, 8984. These hinges are reversible by taking the 3 pieces apart and reconfiguring the opposite swing.
9HHGB -
2500 Series Electronic RFID Lock, Card Access Only
Zephyr lock 2500 Series Electronic RFID Locks are some of our most secure and versatile electronic locks. They have been engineered to work on all standard metal single point, box locker, gravity latch/multipoint, phenolic, and wood laminate lockers. Furthermore, they are designed to meet the same security levels as used in Banking Smart cards, comply with all ADA guidelines for ADA accessibility, and can be used in a variety of applications.
- Unique card key with same security level as used in banking Smart Cards
- Complies with ADA guidelines for ADA accessibility
- Engineered to work on all standard metal single point, box locker, gravity latch/multipoint lockers
- Ideal for wood, phenolic, plastic and laminate lockers
- Supervisory access and override with control and management cards.
- Programmable for both shared use and permanent use
- High impact polycarbonate housing
- Audit trail allows facility to track user history
- New user cards available in the event card is lost
- Battery Powered; Requires (4) AA batteries offering life cycle of 10,000 – 20,000 uses depending on programming.
- Low battery audible warning signal
- External battery powered emergency device offered to allow access to lock if low battery signal is missed and battery life ends
- 1 year warranty from the time of shipment
- Permanent use will lock automatically
- Share use will not lock automatically
- Extension kits for mounting on 1/2″ or 3/4″ material
- RFID access through cards, mini cards, key fobs, and wristbands
- Athletic, student & swimming facility lockers
- OEM equipment
- Health, fitness, golf & country clubs, day spas, wellness centers; hotel & resort lockers
- Employee lockers
- Evidence lockers
2500 -
Fenestra Casement Operator-3-1/4"
Fenestra Casement Operator
This Fenestra Casement Window operator is a replica of a version made in the 1920's to 1950's. This version is made of a die cast material, that is then powder coated in an aluminum finish. If you want bronze color, your best bet is to purchase some bronze spray paint and paint them. Ships with mounting screws and handle.Left hand shownRO727- -
Adams Rite EX88 Rim Exit Device
The Adams Rite EX88 Interlocking Rim Exit Device is designed for heavy duty use on narrow stile aluminium door applications. The EX88 has a unique latch bolt design that interlocks with the frame of the door. This device is non handed, requires a minimum stile width of 2" and will work on aluminum, hollow metal or wood doors.The device is constructed of extruded aluminum with matching metal angled end caps. To order specify your door width, and the color.
EX88- -
Push Bar w/Handle 422X26
1" diameter material
Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.
Please specify either wood or metal door, and its thickness; we'll supply
appropriate fasteners.Please allow 3-4 weeks on Aluminum and Dark Bronze, and 2 weeks on the other finishes
422x26 -
Comtec Aluminum 6" Outswing Keeper Bumper For 1"
Comtec Toilet Partition Aluminum 6" Outswing Strike And Keeper For 1" Post Or Pilaster
Clear Anodized aluminum construction. Strike and Keeper is 6" high by 1-15/16" wide. The three mounting screws are 2" on center apart. Also known as a Bathroom Stall Strike and Keeper outswing1". Used mostly on Solid Plastic (HDPE) Toilet Parttions. Known as 5878.
Shipped with mounting screws.
9HSOSA -
Turbo Dri Jr Surface mounted High Speed Dryer
Compact high-speed hand dryer for applications where less space is available. 5-year warranty. 9-25/32" W x 6-5/8" H x 5-7/16" D
FEATURES- Quick drying — less than 15 seconds
- Operates automatically using infrared sensor
- Auto-resetting thermostat
- 60-second automatic shut off
- Cover fabricated of heavy-duty, one-piece-formed stainless steel
9a0198 -
Push Bar W/Offset Grip 422X39
1" diameter materal
Offset Door Handle
Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.
Please specify either wood or metal door, and its thickness; we'll supply
appropriate fasteners.Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes
422X39 -
Monarch 25-R Series Rim Exit Device
Monarch 25-R Series Rim Exit Device
Hand: Non-handed.
Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN.
Strikes: 299 strike standard.
Latchbolt: Stainless steel, 3⁄4" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out..
Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
Projection: 2-3⁄4" maximum, 2" dogged.
Mounting Height: 40-1⁄4" from CL to finished floor.
Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard.
ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.Call for pricing on non listed finishes
2 week lead time25EO- -
Stair Tread Neoprene Contact Cement 400 Series
For bonding to all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo steps. A rapid drying, long range contact cement; specially formulated for Musson stair coverings. Brush on application; use on back of treads and back of nosing. Contains solvents, extremely flammable. 1 gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 5 gallon containers.
If ordering the gallon or 4 gallon pail, it will ship via freight truck. If you would prefer something that ships Fed Ex Ground, please order the 300 Stair Tread Adhesive.
400AHD -
Push Bar With Offset Grip M422XM39
1-1/4" diameter materal
Offset Door Handle
Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.
Please specify either wood or metal door, and its thickness; we'll supply
appropriate fasteners.Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes
M422xM39 -
LCN 2030 Door Closer
The concealed 2030 Series Pacer® is a heavy duty closer designed to fit in a narrow, minimum 1 3/4” aluminum transom. The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements.
Specifications
- Standard 2030 series closer shipped with standard arm, standard track, mounting/finish plate, and wood and machine screw pack
- Sized cylinders for interior doors to 4’6” and exterior doors to 3’6”
- Handed for right or left swinging doors
- Aluminum frame requires minimum 1 3/4” (44 mm) x 4” (102 mm) tube
- Closers to meet ADA requirements
- Standard or optional custom powder coat finish
- Optional plated finish on arm, fasteners and finish plate
2030 -
ASI Visual Display 9800 Natural Cork Aluminum Frame
Peb-Tac Plus Bulletin Boards
Reliable posting surface of tan natural cork laminated to fiberboard. Cork’s natural resilience makes it the ideal material for display purposes. Available in satin-anodized aluminum or solid oak trim.
PEB-TAC PLUS BULLETIN BOARDS
H x W
Aluminum
Wood
1 1/2" x 2'
AN-182
WN-182
2' x 3'
AN-203
WN-203
2'91/2"
x 3'91/2"AN-304
WN-304
3' x 4'
AN-304-LG
3' x 5'
AN-305
WN-305
4' x 4'
AN-404
WN-404
4' x 5'
AN-405
WN-405
4' x 6'
AN-406
WN-406
4' x 8'
AN-408
WN-408
4' x 10'
AN-410
WN-410
4' x 12'
AN-412
WN-412
4' x 16'
AN-416
WN-416
ANxxxx -
Comtec Aluminum 6" Inswing Strike And Keeper For 1" Post
Comtec Toilet Partition Aluminum 6" Inswing Strike And Keeper For 1" Post Or Pilaster
Clear Anodized aluminum construction. Strike and Keeper is 6" high by 1-15/16" wide. The three mounting screws are 2" on center apart. The slot is 3/8" deep by 1-1/2" high. Also known as a Bathroom Stall Strike and Keeper Inswing 1". Used mostly on Solid Plastic (HDPE) Toilet Parttions. Some manufacture part #'s are 5778, HSISA, and 650-2873.
Shipped with mounting screws.
9HSISA -
Falcon-Doromatic 1690 Exit Device
The design of the Doromatic 1690 is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The Doromatic 1690 may also be used to retrofit a Doromatic 1990 Series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. The 1690NL Cylinder Assembly (169CA) is required if you wish to use a key cylinder on the exterior, SEE RELATED PRODUCTS toward the bottom of this page.
1690EO -
GSA9 Aluminum Stair Treads
Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".
Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.
Purchase the 9" model here.
GSA9 -
GSA75 Aluminum Stair Treads
Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".
Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.
Purchase the 7-1/2" model here.
GSA75- -
International 7100 Concealed Vertical Rod Device
International 7100 Concealed Vertical Rod Device
Modern flat touch bar Concealed Vertical Rod Device Panic exit device. This series offers durability, safety and meets the security demand and access control needs of today. Series 7300 Rim Panic exit devices are used with Narrow, Medium and Wide aluminum door and Hollow Metal and Wood Door applications. Series 7300 is non-handed, Field Reversible for LHRB or RHRB doors. Outside Unlatching and Dogging by Cylinder Key or Dogging by Hex Key in Touch Bar. Standard Units for 36” and 48” in widths (cut bar to fit). Can be used on 30” wide doors.
7101- -
Bobrick Automatic Wall Mounted Soap Dispenser
B-2012 Bobrick automatic wall mounted soap dispenser in stainless steel with satin finish. Corrosion resistant valve dispenses a variety of liquid soaps and disinfectants. The valve is a sensor activated and does not require contact, just motion. The unit has lockable housing shall be equipped with a clear acrylic refill indicator window and is hinged for refilling. This unit holds 30 fluid ounces bulk fill.
B2012 -
Hadrian Plastic Floor Mounted Privacy Screens
Hadrian HDPE solid plastic floor mounted privacy screen is great for a commercial setting with low maintenance. Floor mounted privacy's are 55" height by 14" width through 58" wide panels. All solid plastic Hadrian colors ship out in 5 business days and are 2-4 day travel for deliveries. 5"x70" pilaster and standard aluminum brackets are included with choice of continuous aluminum or stainless full length brackets.
9SFAPXXH -
LCN Sentronic Door Closer 4410ME
LCN Sentronic Door Closer 4410ME
Standard LCN Sentronic Door Closer 4410ME series closer shipped with a 24V or 120V cylinder (please specify) on a mounting plate, metal cover, regular arm, and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted. Handed for right or left swinging door. Concealed or exposed electrical connections. Built-in “On/Off” switch controls hold-open function. Interfaces with fire alarm systems.
LCN Sentronic Door Closer 4410ME parts are also available.
4410ME -
Hadrian Wall Privacy Screen With Pedestal
Hadrian Wall Mounted Privacy Screen's with pedestal for extra strength. Powder coated are available in 58" heights by 18" or 24" wide. Standard chrome brackets with pedestal are included. Wall hung screens are great for between urinals or a sink and urinal. All colors ship out in 12 business days, then 2-4 day travel delivered any where in the usa. we also offer continuous aluminum and stainless steel brackets for extra support.
9SWHSHP -
Roval Recessed Hand Dryer
Roval Recessed Hand Dryer, 20199
This high performing hand dryer, with a drying time of less than 15 seconds, has a cover made of 18 gauge stainless steel and uniquely complements the Roval™ Collection with its bowed face and gently radiused edges. 5-year warranty.
FEATURES:
- Quick drying — less than 15 seconds
- Operates automatically using infrared sensor
- Auto-resetting thermostat
20199 -
ASI Matte Black Liquid Soap Dispenser 48oz
ASI Matte Black liquid soap dispenser is surfaced mounted and holds 48 oz of soap. Refill window is tamper resistant with concealed fastening and offers vandal resistant top hinges filler. The product is stainless steel with a matte black powder coated finish. With a matte black finish this product offers a more sophisticated and bold look while being aesthetically appealing to the eye.
Dimensions
7-1/4” x 6-1/2” x 3-11/16” (184 x 165 x 94 mm)
Spout Projection: 15/16”
Soap Requirements:Proper usage of this dispenser requires, that only soap within the following range for viscosity and pH may be used.
Viscosity Range (mPa·s or cP): 100 – 2.5k
pH Range: 5.5 ~ 8.0
B10-9343-41 -
Monarch 24-R Series Rim Exit Device
Hand: Non-handed.
Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN.
Strikes: 299 strike standard.
Latchbolt: Stainless steel, 3⁄4" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out..
Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
Projection: 2-3⁄4" maximum, 2” dogged.
Mounting Height: 40-1⁄4" from CL to finished floor.
Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard.
ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.Call for pricing on non listed finishes
2 week lead time24EO-- -
Bobrick Phenolic Corner Partitions
Bobrick SCRC solid phenolic material in a Corner Partition layout with overhead braced floor mounted stalls. Standard stalls 36" x 60" depth (24" door), ADA stall are 60" x 60" depth (36" door). All standard stainless steel hardware included with option of full stainless channels and piano hinges. Doors can be either in or out swing to choose from. Up to 8 standard stalls total or 7 standard and 1 ada stall. To have an ADA stall you must add Ada to add 24" to a standard stall of 36" to create 60" width, plus 1 standard stall for 1 complete 60x60 ada stall. To have an ADA stall & standard stall, you must select 2 standard stalls and add Ada 24". 1080 & 1090 series phenolic ship in 3-4 weeks plus travel time.
PHICB -
World Dryer VMax V2 HEPA-Filtered Hand Dryer
VMAX V2 hand dryer’s offer cutting edge technology, aesthetic appeal and HEPA Filtration for restroom facilities. Designed so users can place handing into drying cavity unlike traditional hand dryers that require users to place hand under dryer. Features maintenance alerts for when filter needs to be changed and when water reservoir needs emptied. High performance brushless motors allow for quiet operations and average 10-12 second hand dryer times. Known as World Dryers part number V-649A.
- ABS Plastic Silver Finish
- Voltage: 110-120v(Min. 15 AMP Recommended)
- Brushless DC Motor
- HEPA Filter, Captures 99.97% of particles, 0.3 or larger
- Intelligent LED Indicator Display, Signals when filter needs changing and when water reservoir needs to be emptied.
- 10-12 Second Dry time, Automatic Operation Infrared Sensor
- Quiet Operating, Low Sound Level
- ADA Complaint suitable for walkways and pathways
- Wider hand dryer cavity opening creates a comfortable user experience without touching sides of dryer.
- Utilizes Antimicrobial technology on treated surfaces to protect from bacteria, mold and fungus growth that can cause staining, odors and product deterioration.
- Touchless operation offers a More Hygienic Experience
- Features dedicated reservoir to collect residual water from drying hands. Designed to help prevent water build up and damage to unit and prevent wet floor hazards.
- Unit Size: 13’x26.25”x9.25”
- Replacement HEPA Filter with Odor Neutralizing Tablet Available (93-10385)
- 5 yr Limited Warranty
WD-VM-V649A -
Emco U Wall Rack
Emco U Wall Rack
This utility shelf will solve your need for additional storage above an existing shelf or in a storage room by itself. Perfect for the lower grade classrooms at just above floor level for storage of boots and other items.
Height: 12" (305mm)
Length: 2' to 50'+
Projection: 11 1/2" (292mm)
Slat Color Options:
Bronze Extruded Aluminum, Satin (Silver) Aluminum,
Light Oak, Medium Oak, Unfinished Oak, WalnutPlease Call 1-800-642-2403 for the Wood Grain Slat Pricing
EM-U-XX -
400 Series Vinyl Stair Treads
400 Vinyl Stair Treads
Heavy gauge sharp-rib design Koroseal vinyl treads for heaviest traffic; 1/4" thick at wear area, easily trimmed to cover and fit any stair step. Install over concrete, metal, wood, terrazzo. Extra heavy thickness at the front "wear area". Meets Fed. Specs. RR-T-650E Type B. They are designed for interior use.
SPECIFICATIONS:
No. 400 Koroseal vinyl rib design stair treads 1/4" thick 12" deep; 1-1/4" square nose; contains no asbestos fiber; made of first quality homogeneous vinyl, color throughout thickness; free from imperfections which might lesson serviceability. Select standard length of 24", 30", 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid colors of Brown, Sand, Gray or Black.
VST400 -
Alpine Hemlock Commercial Hand Dryer
Alpine Hemlock Commercial Hand Dryer
- 10 second dry time. Faster then other competitive high speed hand dryers
- Hardwired or plug-in for quick installation
- Beautiful design and color
- 95% Savings over the cost of paper towels
- Blue light for users drying efficiency
- 5 Year limited warranty
- Choice of 7 splendid colors
9A400