Search results for: 'guard 8 delux bearing door hand'
-
LCN 4040XP Hold Open Door Closer
LCN 4040XP Hold Open Door Closer
The same 4040XP Door Closer with the Hold Open Arm arm 4040XP-3049.
- Strongest Pinion Ever - At 3/4”, It’s The Super Hero Of Pinions
- Taller Bearings - 5/8”, Real Muscle Against Forced Openings And Closings
- An Overall 44% Increase In Maximum Load Capacity
- Tougher Teeth - Fight Wear And Tear
- V-Shield Seal With 20% Longer Life
- Better Wear Resistance From Sagging Doors And Warped Frames
- XP = eXtra Protection In Real-World Applications
We ship the 4041XP Hw/PA
4040H- -
Hands-Free/Foot Door Pull BM46
The Hands-Free/Foot Door Pull BM46 can be used as a ADA compliant hands-free door pull when mounted 42" above the finished floor. Or as foot pull when mounted at the bottom of the door. The Pull is 4" x 5" and is made of .090 thick stainless steel. Ships with sex bolts and screws for 1-3/4" door. Available in Brushed Stainless Steel, Flat Black Powder Coat and Dark Bronze Powder Coat.
GBM46- -
Full Mortise Two Bearing Shim Hinge
The PBB Shim Hinge is for use in Fire Doors where the doors are not square. Putting cardboard or wood shims on fire doors is prohibited, so they have come up with a solution where one of the leaves are drilled tapped and a set screw is inserted. These hinges are only available in 4.5 x 4.5 sizes in brushed chrome finish. They are sold in boxes of three hinges and come with wood and machine screws. The base metal is steel.
SHBB81 -
LCN Door Closer Cush-n-Stop Hold Open Arm
Provides hold-open function with templated stop/hold-open points.
Handle controls hold-open function.Specify your current closers model number when ordering. Not all
of the LCN closers have the same shape spindle on the door closer
cylinder. This LCN Arm is known as these part numbers: 1260-3049CNS, 1460-3049CNS, 4040-3049CNS, 4110-3049CNS3049CNS -
Door Finger Protector - Interior Push Side
Door Finger Protector - Interior Push Side
These patented door guards fold against the jamb, allowing them to swing completely 180 degrees. The guard is attached to the face of the door and frame with the provided strong adhesive tape. Clear-frosted color to compliment any color scheme. Finger-Gard for use on Interior Doors, on the push side. Available in 54" or 78" lengths
GFG-A -
Lock Guard Slim Line
- Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000)
Monolock and Unilock. - No exposed fasteners on face of unit.
- Unique design provides maximum security, virtually eliminating the
opening between door and frame at latch point. - Available in 13 Gauge Stainless Steel or 12 Gauge Steel.
1-1/2" Wide x 7" High
Stud center to center: 4-1/2"1625SL- - Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000)
-
LCN Sentronic Door Closer Arm - 4110SE-3077T
LCN Sentronic Door Closer Arm - 4110SE-3077T
LCN part # 4110SE-3077T
This arm will only work on the 4110SE. If you have another LCN Sentronic Model, we can order the arm you need. For us to do that we would need to know which model you have (4110SE, 4010SE, etc..) and the hand of the door, see diagram.
The arm shown in the picture is a 4040SE arm, the 4110SE arm is the same, but the shaft hole is an oval.
4110SE-3077T -
Hadrian Partitions Solid Plastic 8" Wrap Door Kit
Hadrain Partitions 8" wrap door kit for Solid Plastic material. Comes in anodized aluminum finish and are desgned for 1" thick material only. You will need to choose In or Out swing when ordering. Can be used as right or left hand as hinges are field reversible. To hand handing, this can be done by taking the 3 pieces apart and reconfiguring the opposite swing. See Hadrians part numbers/ known as numbers listed below. Also used with Comtec-Hiny Hiders-Scranton.
Inswing: 261005 and 261025
Outswing: 621006 and 261026
9HH621 -
LCN Sentronic Door Closer 4410ME
LCN Sentronic Door Closer 4410ME
Standard LCN Sentronic Door Closer 4410ME series closer shipped with a 24V or 120V cylinder (please specify) on a mounting plate, metal cover, regular arm, and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted. Handed for right or left swinging door. Concealed or exposed electrical connections. Built-in “On/Off” switch controls hold-open function. Interfaces with fire alarm systems.
LCN Sentronic Door Closer 4410ME parts are also available.
4410ME -
LCN Sentronic Door Closer 4310ME
LCN Sentronic Door Closer 4310ME
Standard LCN Sentronic Door Closer 4310ME series closer shipped with a 24V or 120V cylinder (please specify) on a mounting plate, metal cover, Swing-Free arm, track, track roller, and wood and machine screw pack. See 4310ME Series pages 23 & 24 for options. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted with Swing-Free arm engaged. Handed for right or left swinging door. Concealed or exposed electrical connections. Built-in “On/Off” switch controls hold-open function. Swing-Free arm allows door to be moved without door closer resistance. Interfaces with fire alarm systems. LCN Sentronic Door Closer 4310ME part are also available.
4310ME- -
LCN Door Closer Fusible Link Arm
LCN Door Closer Fusible Link Arm
Adjustable nut allows door closer arm to lock when the preselect position is reached. Fusible Link will hold door until heat melts the "Link" and then the door will shut. Used on Fire Doors to control a spreading fire.
Specify your current closers model number when ordering.
Not all of the LCN closers have the same shape spindle on the door closer
cylinder. The LCN Part #'s on this Fusible Link Arm is: 4010-3049FL, 4020-3049FL, 4110-3049FL3049FL -
Door Finger Protector - Interior Pull Side
Door Finger Protector - Interior Pull Side
These patented door guards fold against the jamb, allowing them to swing completely 180 degrees. The guard is attached to the face of the door and frame with the provided strong adhesive tape. Clear-frosted color to compliment any color scheme. Finger-Gard for use on Interior Doors, on the pull side. Available in 54" or 78" lengths.
Part number GFG3 for 54" length, and GFG4 for the 78" length
GFG-B -
LCN Door Closer Hold Open Arm
LCN Door Closer Hold Open Arm
Adjustable nut allows door closer arm to lock when the preselect position is reached.
Specify your current closers model number when ordering.
Not all of the LCN closers have the same shape spindle on the door closer
cylinder. The LCN Part #'s on this Regular Arm is: 1260-3049, 1460-3049, 4010-3049, 4020-3049, 4040-30493049-- -
Global Partitions Solid Plastic 8" Wrap Door Kit
Global partitions 8" wrap door kit for Solid Plastic material. Comes in anodized aluminum finish and are for 1" thick material only. You will need to choose in or out swing when ordering. Can be used as right or left hand as hinges are field reversible. This is done by taking the 3 pieces apart and reconfiguring the opposite swing. See manufacturers numbers listed below. Used with Global and Accurate partitions.
Inswing Door Kit: 40-8441007
Outswing door Kit: 40-8441008
9G844 -
Roval Recessed Hand Dryer
Roval Recessed Hand Dryer, 20199
This high performing hand dryer, with a drying time of less than 15 seconds, has a cover made of 18 gauge stainless steel and uniquely complements the Roval™ Collection with its bowed face and gently radiused edges. 5-year warranty.
FEATURES:
- Quick drying — less than 15 seconds
- Operates automatically using infrared sensor
- Auto-resetting thermostat
20199 -
Intermediate Hinge IP-1901 and IP-1902
Intermediate Hinge IP-1901 and IP-1902
Cast aluminum construction with steel bearings. The hinge measures 5" high by 2-1/2" wide. This hinge has a 3/4" offset. We find this hinge in the middle section of the door between the top and bottom hinges. Available in the Aluminum color and Dark Brown. See the dimensional information under more views.
Manufacture Part # IP-1901 and IP-1902
IP-1901 is for Left Hand Doors
IP-1902 is for Right Hand DoorsGIP1901- -
8" Kickdown Door Holder / Stops Grand Standard
8" Kickdown Door Holder / Stops Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelMade by Grand Specialties 608z
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
GJ608 -
LCN Door Closer Spring Cush Arm
LCN Door Closer Spring Cush Arm 3077SC
Optional, parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe.
Specify your current closers model number when ordering. Not all of the LCN closers have the same shape spindle on the door closer cylinder. The LCN Part #'s on this Regular Arm is: 1460-3077SC, 4040-3077SC, 4110-3077SC
3077SC -
International 5530S Surface Vertical Rod Device
International 5530S Surface Vertical Rod Device-Light Duty
All devices are non-handed design
Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
High shock-resistant latching mechanical design or protection from vandalism
All inside components are made of high rust-resistant alloy or heavy electroplated steelStandard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.Standard vertical rod accommodates 7’ or 8’ doors
We offer the aluminum and dark bronze finish online, the polished brass and stainless steel finishes are available.
5530S- -
Corner Guards-Clear Plastic 313 - 2-1/2" X 2-1/2" X 48"
Corner Guards-Clear Plastic 313 - 2-1/2" X 2-1/2" X 48"
.120" thick Clear polycarbonate construction with screws included for mounting. 2-1/2" legs by 48" long. Longer lengths are available, please call for pricing.
GCG313 -
LCN Door Closer Rod And Shoe
LCN Door Closer Rod And Shoe
This piece fits into the female part of all LCN Regular Arms. The old style had two concave set screws and a ball pressed into the rod. If the door over rotated the ball would pull out of the concave set screws. The new version has a pin holding the rod to the shoe which is designed to fail if the door is over rotated. This piece will work on the LCN 1260, 1460, 4010, 4020, 4030 and 4040 door closers with regular arms. Some of the really old models have multiple threaded holes, so you might have to drill a hole in the female tube. Part #'s 4040-79, 4040-79LR and 4040-79ELR. The 1260, 1460, 4010, or 4020 could replace the 4040 in those part numbers, they are the same.
79 -
Doromatic 2090 Exit Device
The Doromatic 2090 provides balanced appearance, dependable performance and economical pricing, making it a popular choice where rim exit devices are required.
Hand: Specify RHR or LHR, not reversible. See "More View"
Left Hand Reverse shown in picture
Latchbolt: 1/2" throw hardened steel.
Dogging Feature: Hex dogging standard.
Sizes: Field adjustable width, 41" crossbar standard, fits
3' 8" door width, extra length crossbars available.
Doors: 1-3/4" thick metal or wood doors, specify if wood door.
Projections: 4-3/8" extended, 2-1/2" depressed.
Stile: 1-3/4" minimum.Replacement parts are also available
Shipped with all screws and strikes.
G2090EO -
Norton Door Closer Rod and Shoe
Norton Door Closer Rod and Shoe
The Norton Rod and Shoe 7701-11 and 7701-11A come in two different lengths, 8-7/8" anc 12-1/2". The length is measured from the end of the bar to the center of the eyelet.
Norton Part #'s:
8-7/8" Long 7701-11
12-1/2" Long 7701-11A7701-11- -
LCN Door Closer Spring Cush Hold Open Arm
LCN Door Closer Spring Cush Hold Open Arm 3049SC
Optional, parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function.
Specify your current closers model number when ordering. Not all
of the LCN closers have the same shape spindle on the door closer
cylinder. The LCN Part #'s on this Regular Arm is: 1460-3049SC, 4040-3049SC, 4110-3049SC3049SC -
International Door Closer 851 Series
International Door Closer 851 Series
FEATURES
Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation. Ships with regular and parallel arm bracket3/4" x 6-3/8" mounting holes
851- -
International Door Closer 852 Series
International Door Closer 852 Series
FEATURESTwo Adjustment Valves: Closing and Latching
speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation. Shipped with regular and parallel arm bracket.3/4" x 7-3/8" mounting holes
852- -
Corner Guard 311
Fabricated from B & S 16 ga. (.050). Standard lengths are 36", 42" and 48". Custom capabilities include variations of all of the above parts including frame protectors and vertical rod protectors.
2" x 2" x 48"
Screws included for mounting
Custom sizes are available!Please allow 1 week shipping time
GCG311 -
Corner Guard 303
Fabricated from B & S 16 ga. (.050). Standard lengths are 36", 42" and 48". Custom capabilities include variations of all of the above parts including frame protectors and vertical rod protectors.
Custom sizes are available!
Screws included for mounting
GDE303