Search results for: 'stripping stall on oper 2'
-
7520R Service Weight Smooth Rubber Treads Square Nose
The 7520R is a smooth surface rubber stair tread. These treads come in Square and Round Nose, this page is for the Square Nose, for Round Nose search 7520RRD. The treads are 1/8" thick along the entire depth of the treads, and have a nose that drops down 1-9/16". For the Grit Stripped version you would order the 220 or the 2520. The 220 comes with two 3/4" grit strips, the 2520 would be the visually impaired version with one 2" wide strip. They are designed for interior use.
7520R -
Truth Window Operator 15.32
Truth Single Arm Window Operator. This new style replaces the older traditional size shown in the diagrams.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
We sometimes find 45251 cast on the housing, and 40051 and 40052 stamped on the arm
Left hand shown. The Wi11454 handle in matching color is included with the operator.
WI1532 -
Truth Maxim Dyad Window Operator 50.50
The Truth 50.50 Dyad Window Operator was Manufactured from 1999 to 2019. It was also known as a TH-24082, TH-24083, TH-24182, or TH-24183. We are now shipping the Wi5060 as a replacement with matching color Encore Handle and Cover 12614/12616.
We sometimes find the number 31876 stamped on this operator.
WI5050 -
Truth Window Operator 15.31
Truth Single Arm Window Operator. This new style replaces the older tradiational size shown in the diagrams.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
We sometimes find the number 45251 cast on the housing, and 40049 and 40050 stamped on the arms. This operator has a Nylon Wheel or Roller.
Left hand shown. The Wi11454 handle in matching color is included
WI1531 -
Truth Entrygard Window Operator Offset Down 15.61
Truth Entrygard Dual Arm Operator. We would expect you to find 20810 or 20544 on the linkage arm, which measures 4-7/16" overall length. This is the most common size we find in use. Other common numbers we would expect to find are 31538, 31539, 30841, 30842, 30472, 30470, 20810, or 20544. Call or email for quantity "Discount Codes".
For offset up, order Wi1510.
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Part # Hand
WI1561R Right Hand
WI1561L Left HandTruth Entrygard Dual Arm Operator
WI1561- -
GS620D Square Nose Rubber Stair Tread
The GS620D Rubber Stair Tread with Grit Stripping. The GS620D is only available in the square nose. This tread offers an 1/8" nose thickness, has an adjustable and tapered nose. You have two choices on the Grit Stripping, the Visual Impaired 1-2" wide or 2-3/4" wide grit tape strips. They are designed for interior use.
GS620DSN -
Casement Operator 11" Arm
Casement Window Operator 11" Arm
Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.
RO269-70 -
Truth Entrygard Window Operator - Stainless Steel 15.14
Truth Entrygard Dual Arm Window Operator. This operator is the same as the Wi1510, except are arms are made of stainless Steel
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.
Common numbers found on this operator are 30758 RH , 30757 LH, 30852, 20812, and 30767
Left hand shown.
WI1514 -
GS780R Raised Disc Rubber Stair Tread
The GS780R Rubber Stair Tread is a Raised Disc. It features an adjustable nose that drops down 1-9/16". The nose is 1/8" thick. You have two choices on the Grit Stripping, the Visual Impaired 1-2" wide or 2-3/4" wide grit tape strips. They are designed for interior use.
GS780R -
Aluminum Nosing 2 inch with Grit Surface
This 2-1/2" deep nosing is made from the same material as our Grit-Surface Aluminum Treads. The front edge is 1-3/4" deep (inside nose dimension is 1-1/4"). The nose has a 1-3/4" wide abrasive finish with a 3/4" tapered aluminum back edge. Both the nose and tapered edge have a 1/4" wide reflective yellow safety tape strip for additional safety. The nosing is available in abrasive colors of Black, Brown, Blue, Gray, Green, Red or Yellow. Nosing is available solid (for glue-down applications) or with countersunk holes (for screw-down applications) every 12". Nose drops 1-1/16".
SPECIFICATIONS:
Furnish and install Musson Grit-Surface Aluminum Nosings, 3/16" thick X 2-1/2" deep; cut lengths up to 10 foot long. Tread surface shall have aluminum oxide abrasives permanently bonded to a heat treated aluminum nosing with 1/4" wide reflective yellow safety strip on both the top surface (between the grit surface and aluminum) and the nose. Grit surface shall be in one of the following standard colors: Black, Brown, Blue, Gray, Green, Red or Yellow. Nosings can be supplied with two countersunk holes every 12" for screw down installation or without holes for installation with our #400 Neoprene Contact Cement.
Custom sizes are available up to 10' long
GSA2N- -
Hadrian Stainless Steel Corner Stalls
Hadrian stainless steel corner bathroom partitions floor mounted overhead braced stalls with a smooth surface. Standard stalls 36" x 60" depth (24" door), ADA stall 60" x 60" depth (36" door). Standard chrome plated alloy hardware included. Doors can be either in or out swing. Up to 8 standard stalls total or 7 standard and 1 ada stall. All toilet partitions ship in 48-72 hours plus 2-4 days travel. To have an ADA stall you must select 1 ADA 24x60, plus 1 standard stall for 1 complete 60x60 ada stall. To have an ADA stall & standard stall, you must select 2 standard stalls and 1 ADA stall 24x60.
SSICH -
Truth Maxim Operator-50.01 Low Profile
The Truth 50.01 Maxim Dual Arm is one of the more popular new style operators from Truth. They are only been around since 1999, but were discontinued in 2020. The Truth 50.11 is an exact replacement, and it ships with the 12614 or 12616 Encore Handle and Cover.
Common numbers sometimes found on this operator are 31876 and 41011.
>WI5001 -
Truth Split Arm Window Operator 15.26
Truth Split Arm Window Operator 15.26
To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.
White and Bronze only
We only have the Traditional Housing for the Right Hand Bronze operator.
WI1526 -
Accurate Partition Alcove Stalls in Steel
Accurate Commercial Partition Alcove Handicap Stalls in Powder Coated Steel overhead braced floor mounted compartments. The alcove stall includes 36" door, 2 pilasters and panel to make up the distance. Accurate Doors can be either in or out swing. All partition hardware included with standard chrome hardware for the door kits and brackets. All toilet partitions ship in 48-72 hours plus 2-4 days travel. New Style slide latch with indicator in chrome plated version included. New Door style are Integrated for no gap off doors.
PCSALCOVEA -
Truth 22.17 Pivot Shoe Roto Awning Operator
Truth 22.17 Awning Window Operator
Surface mounted Truth Awning Window Operator. The arms span 13-1/4” from rivet to rivet. The mounting holes measure 6-7/8” on the outside screws center to center, and 6” center to center on the two inside mounting screws.
Truth Part # 22.17
Wi2217- -
Hadrian Stainless Steel Free Standing Stalls
Hadrian stainless steel free standing bathroom partitions floor mounted overhead braced stalls with a smooth surface. Standard stalls 36" x 60" depth (24" door), ADA stall 60" x 60" depth (36" door). Standard chrome plated alloy hardware included. Doors can be either in or out swing. Up to 8 standard stalls total or 7 standard and 1 ada stall. All toilet partitions ship in 48-72 hours plus 2-4 days travel. To have an ADA stall you must select 1 ADA 24x60, plus 1 standard stall for 1 complete 60x60 ada stall. To have an ADA stall & standard stall, you must select 2 standard stalls and 1 ADA stall 24x60.
SSFSH -
Truth 11.43 Awning Operator
Truth 11.43 Awning Operator
Arms are 8-3/8" long, and measures 20-3/4" across when the arms are in the closed position.
Awing Operator, we usually find 31545 stamped on the arm, they used to be a cadmium plated steel, now they are powder coated. We also find 21221 on it.
WI1143- -
Truth 22.10 Pivot Shoe Roto Awning Operator
Truth 22.10 Awning Window Operator.
Surface mounted Truth Awning Window Operator. The arms span 24-7/8" when in the closed postion. The mounting screws are 7" on center on the outside screw holes and 6" on center on the inside holes. Plastic Glides are not available separately, they are riveted in place.
Truth Part # 22.10
WI2210 -
Truth 11.44 Awning Operator
Truth 11.44 Awning Operator
Arms are 13-3/8" long, and the span of the arms when in the closed position, arms opposing each other, is 28-1/8" (Hole to Hole)
Awing Operator, we usually find 40759, 40760, and 21221 stamped on the arms, they used to be a cadmium plated steel, now they are powder coated.
WI1144- -
Truth Window Operator Surface Mount 11" Front Mount
Truth Window Operator Surface Mount 11"
This Truth Surface Mounted Window Operator is usually used on commercial aluminum windows. It features an 11" long arm, measured from the center of the housing to the center of the metal roller. The outside mounting screw holes are 4-3/4" a part and the inter screws are 3-7/8" on center.
Right Hand Shown, in Aluminum
Right Hand Aluminum Wi36223AL
Left Hand Aluminum Wi36222AL
Right Hand Bronze Wi36223BR
Left Hand Bronze Wi36222BR
Right Hand White Wi36223W
Left Hand White Wi36222WWi3622X