Search results for: 'screen door hardware latch spec list city util'
-
Cal-Royal 9800 Rim Device
The Cal-Royal 9800 Rim Device is a grade 1 Heavy Duty Exit Device. The 9800 has the same template as the 8800 and 9800 with escutcheon lever trim. The 36 inch device will be 32 inches wide and can be cut down an additional 2" to fit doors as narrow as 30 inches. The 48 inch will be 44 inches wide and can be cut down to fit doors 36 inches wide. The device is non handed, meaning it will work on a left hand reverse or right hand reverse door. Strike and mounting screws are included.
9800EO- -
Doromatic Surface Strike STK45
Doromatic Surface Strike STK45
This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the 1590, 1790 and 2090 Rim Devices. The strike base measures 1-5/16" wide by 3-1/4" high, and 1/4" thick. The three slots are 1-1/4" on center. This strike ships with the mounting screws.
US19-Black finish
STK45 -
Von Duprin Electric Strike 6113 24VDC
Von Duprin Electric Strike 6113 24VDC
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6113 has a 3/4” latch bolt throw, 6” face plate length, 1-5/8” width, and an 1-15/16” backbone depth. The lock retrofits the VD 3011 and VD 3021. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6113 -
American Sanitary Top Hinge Insert Escutcheon
American Sanitary Partitions Top Hinge Door Insert For 1"
Chrome plated Zamac die cast construction. The hinge insert outside dimensions are 2-3/16" wide by 1-5/32" deep by 1-13/16" high. The two holes have a diameter of 13/32". Also known as a Bathroom Stall Door Insert Top 1". Manufacture part # 2400.
9AM150 -
Norton 7700 Power Track Hook-Up Boxes
Norton 7700/7705PT Hook-Up Boxes come in two voltages, 24 and 120, and two configurations Hinge Side and Stop Side. Hinge Side means the track is on the side of the door that you can see the Hinges, also know as the pull side. Stop Side means the track is on the push side of the door.
PTOHB- -
Fiat Keeper Bumper Concealed
Fiat Partitions Keeper Bumper Concealed And Strike For Concealed Latches Inswing/Outswing 1-1/4"
Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a1/2" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5960
Shipped with screws for mounting.
Same as the 9S8861
9F0227 -
Accurate Top and Bottom Hinge
Accurate Partitions Top and Bottom Hinge for 1-1/4" Round Post
chrome plated
used on Accurate Metal Partitions for mounting on a 1-1/4" thick round edge pilaster.
Accurate part number 50-8517300 and 50-2517200 and 50-398660. Security screws included.
A= 1-1/2", Used prior to January 1st 2013. There is no exact replacement hinge that will work.
**Not Available anymore, see link for new doors
9HAH15 -
Padlockable Cam Lock : Black
Wood locker padlockable cam hasp in black finish. For up to 1-1/8" thick door and a 3/4" hole in the door for mounting. Known as a Hafele 235.17.300 hasp lock.
- Cylinder Length: 1-5/16in.(33mm)
- Padlockable Faceplate Size: 1-13/16in.(46mm)H x 1in.(25mm)W
- Maximum Material Thickness: 1-1/8in.(28mm)
- Hole Diameter: 3/4in. (19mm)
CAM300 -
Bobrick Surface Mounted Waste Receptacle
Bobrick B-35649 surface mounted waste receptacle in a satin finish stainless steel all welded construction. The door is secured to cabinet with a concealed full length stainless piano hinge. Equipped with a cable door swing limit and tumbler lock. Waste bin constructed of heavy gauge stainless steel. The unit is a 12 gallon capacity and is 17-3/8"w x 40-1/8"h x 8-7/8" depth.
B35649 -
SS Piano Hinge 57" 14 Gauge,1/4" Pin 20 Degree Cam Close
Partition Door Piano Hinge 57", 14 Gauge SS,1/4" Pin with 20 Degree Cam Close. This hinge keeps the door open 20 degree so the user knows there is nobody in the restroom toilet stall. This is the most Heavy Duty Continuous Full Length Hinge we sell. 14 gauge (.075" thick) stainless steel construction with a 1/4" diameter hinge pin. The hinge leafs are angle cut so your door will close with the camming action. The hinge is 3" wide when laid flat, and 57" long. Screws are spaced 11" apart and the holes are 9/32" diameter and has 6 sets of holes. Hinge can be raised up 3/8" for emergency entry. Also known as a Restroom Toilet Stall Full Length Continuous Hinge. Manufacturer part #650-9401 and 160039. The hinges must be mounted flat when door is shut. For inside swing the hinges are mounted on the inside of the stall. For the outside they must be mounted on the outside.
9A9401 -
Padlockable Cam Lock : Brushed Nickel
Wood locker padlockable cam hasp in brushed nickel zinc die cast finish. For up to 1-1/8" thick door and a 3/4" hole in the door for mounting. Known as a Hafele 235.17.600 hasp lock.
- Cylinder Length: 1-5/16in.(33mm)
- Padlockable Faceplate Size: 1-13/16in.(46mm)H x 1in.(25mm)W
- Maximum Material Thickness: 1-1/8in.(28mm)
- Hole Diameter: 3/4in. (19mm)
CAM600 -
Falcon Dor-o-Matic 3049DS Dead Stop Hold Open Arm
The Falcon Dor-o-Matic 3049DS Dead Stop Hold Open Arm is used on their SC60, SC70 and SC80 Door closers only. This arm is non-hnaded, stamped, heavy duty, hold-opn parallel arm includes a positive mechanical stop and non-adjustable forearm assembly for high volume traffic and harsh conditions.
Select Color and Function (SC60, SC70 or SC80 Door Closer Model #)
3049DS -
Surface Mounted S.S. Hinge Set- Rh In, Lh Outswing
Toilet Partition Higne Set, Rh Inswing, Lh Outswing Stamped Stainless Steel
Stainless Steel construction, 1/8" thick. Outside dimensions of the hinge are 3-5/16" wide by 2-7/8" high. The screw spacing is 2-5/16" wide by 1-1/2" high. The mounting holes are 1/4" diameter. For use on a right hand inswing door, or left hand outswing door. See "More Veiws" for the handing diagram. Also known as a Bathroom Stall Gravity Hinge Set, or Toilet Partition Surface Mounted Hinge Set. Manufacture part # 7093.
Shipped with mounting screws.
9A7093 -
Monarch 19-V Exit Device
Monarch 19-V Exit Device
Hand: Field reversible.
Functions: All functions built into “EO” device.
Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313;
Latchbolt: Top stainless steel 3⁄4" throw. Bottom square bolt 1⁄2" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
Stock Sizes: 3'0" and 4'0"
Doors: 13⁄4" thick, wood or metal.
Narrow Stile Doors: To 1-3⁄4" N.S. aluminum. With control trim–2-1⁄4" min. stile.
Projection: 2-1⁄2" max., 1-7⁄8" dogged.36" device is only 33-1/2" wide
48" device is only 43-1/2" wideG19VEO- -
ASI locker Recess Lifter Handle
ASI locker recess lifter handle in black color. The lifter attaches to the lock bar which releases the door from the frame and unlocks the door. This is an Ada locker handled and is now a standard in the locker industry. The trigger is now sold separately if this is all you need.
905100 -
Von Duprin 99 Push Bar Retrofit Kit-Pbkit
Von Duprin 99 Push Bar Retrofit Kit-Pbkit
Von Duprin's 98/99 Push Bar Retrofit Kit updates your current version touch pad, to the newest version. Used on all the Von Durpin 33A, 35A, 99 and 98's.
Von Duprin part # PBKIT
For doors 30" to 36" order the 36" size. If your door is 36" to 48" order the 48" size
G99R35 -
Comtec 8 inch Wrap Around Hinge Set
Comtec Toilet Partition 8" Wrap Around Hinge Set. Clear anodized aluminum for 1" panel and 1" door. Used by every Bathroom Toilet Stall manufacture on Solid Plastic Toilet Partitions Doors. Sometimes known as part numbers, 7978, 7988, 8974, 8984. These hinges are reversible by taking the 3 pieces apart and reconfiguring the opposite swing.
9HHGB
