Search results for: 'rod brass arobert bodi and associated associates'
-
4" Kickdown Door Holder / Stop FS452
4" Kickdown Door Holder / Stop FS452
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Stainless steel spring.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip.
- Shoes are easily replaced when worn.
- FS452-4 has a door-to-floor clearance of 2" or less.
- Packed with sheet metal screws.
GJ452-4- -
Trim Protector Bar
Trim Protector Bar
A great product for applications were your door knobs and levers are getting damaged due to hand carts and other items hitting door trim. Mount this product above or below existing items on walls and doors to protect and sheild them from damage.
Material: Brass, Bronze, Stainless Steel
Material Size: 3/8" x 1-1/2"
Base: 1-3/4" x 3-1/2"
Projection: 3-1/4"GA111- -
5" Kickdown Door Holder / Stop FS452
5" Kickdown Door Holder / Stop FS452
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Stainless steel spring.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip.
- Shoes are easily replaced when worn.
- FS452-5 has a door-to-floor clearance up to 3".
- Packed with sheet metal screws.
Ives Part # FS452
GJ452-5- -
Pull Plate 5020
Pull Plate 5020
The plate is constructed of .050" wrought metal, in either solid aluminum, brass or stainless steel, with Door Pull GHE20 -8" center. Handles come with thru bolts, finish washers and the plates come with sheet metal screws that fit the countersunk holes.
GPL20B -
Norton 1600 Door Closer
Norton 1600 Door Closer
- ANSI A156.4, Grade 1
- 10-year warranty
- Non-handed
- Rack-and-pinion design
- Cast aluminum body
- Standard, separate and independent, latch, sweep
and backcheck intensity valves - 2-7/8" (73mm) projection
- Tri-Packed- packed for regular arm, top jamb and
parallel arm installations.
3/4" x 9-1/16" hole spacingOlder models may be stamped with Scoville or Eaton, which are the companies that used to own Norton.
We sometimes find 20-1624-4001, or 20-1604-4001 stamped on the back of the closer. If your door closer is stamped 20-1603-4001 or 20-1623-4001, you might want to double check the hole spacing. The 20-1603-4001 usually has a hole spacing of 3/4" x 8-3/16", you could use the International Door Closer 853 as a replacement.We ship the 1601 Norton Door Closer, which is a non size (meaning you can adjust the spring tension), which will work in place of the 1603BC, 1604BC, 1605BC and 1606BC.
1600- -
5" Kickdown Door Holder / Stop Grand Standard
5" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steel or Brass platedmade by Grand Specialties 605z 605b
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
GJ605- -
Jackson Exit Device Center Case 1085/1095
Jackson 1085 Hinge Case, also the 1095 Jackson inactive Case. Includes everything in the housing.
The housing mounting studs are 6-5/16" on centers
Jackson part # 30-982 Right Hand Body and Arm Assembly
Jackson part # 30-983 Left Hand Body and Arm AssemblyHousing Shown in Aluminum
G1085XX -
4" Kickdown Door Holder / Stop Grand Standard
4" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American MadeMade by Grand Specialties
Zinc plated steel or Brass plated
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
GJ604- -
Von Duprin 88 Active Case
Replacement Von Duprin 88 Rim Device Center Case
Includes all of the internal parts and hardware. This case works with all Exit Only, Dummy and Night Latch Trims. Call or email us if you have a Lever, Knob or Thumb Piece Trim.
Von Duprin Part # 050409
Old Part # 10166288R10- -
Floor Mounted Door Stop FS442
Ives Floor Mounted Door Stop FS442
This Floor Mounted Door Stop used to go by the name Glynn Johnson GJFB19 or FB19. When Ingersoll Rand purchased H. B. Ives in the 1990's they brought it over under the Ives Floor Mounted Door Stop FS442. Features: Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts. Accommodates door undercut up to 2". Heavy-Duty cast brass or aluminum construction. Non-marring rubber bumper. This door stop has an overall height 2-7/8". Mounted shield and screws included.
GJFB19- -
Wall Mounted Holder/Stop WS445
Wall Mounted Holder/Stop WS445
- Constructed in cast of brass or aluminum.
- Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike.
- Unit requires manual disengagement to release Hold-Open.
- Replaceable resilient, non-marring rubber tip.
WS445 is packed with expansion shield and lead shield for masonry type mounting.
GJW27- -
Pull Plate 5026
Pull Plate 5026
The plate is a solid .050" wought plate of solid aluminum, brass or stainless steel depending on the finish. The Door Pull GHE26 has 8" centers and is constructed of solid aluminum, brass or stainless steel, and is 1" in diameter, handles come with thru bolts. The plate come predrilled with counter sunk holes and sheet metal screws in matching finiish.
GPL26BW- -
Wall Bumper Heavy Duty WS402CVX
Ives Wall Bumper Heavy Duty WS402CVX
Features:
• Constructed in heavy-duty cast brass or aluminum base.
• Special retainer cup makes rubber tamper resistant.
• The WS402CVX unit is designed with a convex rubber bumper packed with screw and
drywall anchor.2-1/2" diameter with 1" projection
GJ50C- -
Floor Mounted Door Holder/Stop FS43
Ives Floor Mounted Door Holder FS43
Features:
• Automatic door holders ideal for heavy-traffic situations that require a simple,
fool-proof, Hold-Open device.
• Forged from brass.
• Unit is activated automatically when door is opened. A firm pull on door releases
the mechanism.
• Strikes accommodate different door to floor clearances.
• Model numbers are determined by strike/door-to-floor clearances.
• Holder position on door is adjustable.Door to Floor Clearance 1-5/8" to 2-11/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF43A- -
-
Pull Plate 5021
Pull Plate 5021
The plate is a .050" solid wought plate in either aluminum, brass or stainless steel depending on the finish. The Door Pull GHE21 has 6" centers, handles come with thru bolts. The plates are pre drilled with counter sunk holes and come with sheet metal screws.
GPL21A- -
Pull Plate 5010
Pull Plate 5010
The plate is .050" wought solid aluminum, stainless steel, or brass depending on the finish. The Door Pull GHE10, handles come with thru bolts. The plate has counter sunk holes and sheet metal screws in matching finish.
3" x 12" GPL312
3.5" x 15" GPL315
4" x 16" GPL416GPL10 -
Pull Plate 5810
Pull Plate 5810
7/32" thick forged plate made of solid aluminum, brass or stainless steel depending on the finish. The Door Pull GHE10, handles come with thru bolts and finish washers. The plate has counter sunk holes and sheet metal screws for mounting. 3-1/2 x 15 inch Plate only.
GPL5810- -
Wall Bumper Stop Heavy Duty WS401CCV
Ives Wall Bumper Heavy Duty WS401CCV
Features:
- Special retainer cup makes rubber tamper resistant.
- Constructed in heavy-duty cast brass or aluminum base.
- The WS401CCV unit is designed with a concave rubber bumper which avoids damage to ocks with projecting buttons, packed with wood screw and plastic anchor.
2-1/2" diameter with a 1" projection
GJ60C- -
Wall Mounted Door Holder / Stop WS40
Ives Wall Mounted Door Holder WS40
- Constructed of sturdy cast brass, or aluminum.
- Holder is mounted on wall and strike is mounted on door.
- Roller on holder rides up seats itself on strike, with a heavy duty bumper
pad deadening the sound and shock. - Universal screw pack accommodates all types wall construction.
Base Height: 2"
Base Width: 2-1/2"
Base Projection: 2-1/4"
Engaged Projection: 3-1/2"
Strike Height: 2-1/16"
Strike Width: 3/4"
Strike Projection: 2"GJW40- -
Floor Mounted Door Holder / Stop FS446
Ives Floor Mounted Door Holder FS446
Features:
- Manual type floor holder ideal for interior or exterior use.
- Cast brass or aluminum construction.
- Accommodates door undercut up to 2-1/2".
- Non-marring rubber tip.
- Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged instrike. Unit requires manual disengagement to release Hold-Open.
- Packed with expansion shield and lead shield.
Overall Height 3-3/4"
Height to Stop Center Line 2-5/8"
Diameter 2-1/2"
GJF26- -
LCN 1260 Door Closer
The LCN 1260 Series combines the best features from the previous 1070 and 1370 into a single versatile and economical cast iron closer, with dual mounting capability. The 1260 is adjustable spring sizes 1-5 and mounts to the most common commercial footprint. The 1260 also features a complete line of regular and extra duty arms, LCN’s peel-n-stick installation templates, a convenient spring adjust pointer. The Brass finish is Painted Brass.
We ship the 1261 Rw/PA
1260- -
Push Bar 1' Diameter 422
Push Bar 1' Diameter 422
Bar is made of solid aluminum, Stainless Steel or Bronze. The bar comes with thru bolts for mountingMaterial Size 1 " round
Base 1" Round
Clearance 1-1/8"
Projection 2-1/8"Please allow 4 weeks on Aluminum, Polished Brass, and Oil Rubbed Bronze. Stainless Steel and Polished Stainless Steel take about 2 weeks.
422 -
International Door Closer CI44 Series
International Door Closer CI44 Series
1. Recommended for High Traffic doors
2. Rugged Cast Iron Body with forged steel arm
3. Double heat treated steel pinion
4. All weather fluid
5. Non-handed
6. Non-sized adjustable 1-6; standard with BackcheckDirect replacement for the LCN 4040
44CI- -
Floor Mounted Door Holder/Stop FS41
Ives Floor Mounted Door Holder FS41
Features:
• Automatic door holders ideal for heavy-traffic situations that require a simple,
fool-proof, Hold-Open device.
• Forged from brass.
• Unit is activated automatically when door is opened. A firm pull on door releases
the mechanism.
• Strikes accommodate different door to floor clearances.
• Model numbers are determined by strike/door-to-floor clearances.
• Holder position on door is adjustable.Door to Floor Clearance 9/16" to 1-1/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF41A-