Search results for: 'closer latch track thread acrylic sico'

Sico New Style Square Post Stool Tops. The new style Sico Stool Tops measure 13" diameter x 7/8" Square inside diameter. 

KTSICNCU-Dark Blue
KTSICNCR-Red
KTSICNCA-Black

Sico Part # 4012-xxx

International Door Closer 3010-JO Arm and Track

International Door Closer 3010-JO Arm and Track for Offset Top Arm Assembly Mortised Type (9/16" Depth of Top Rail). Track measures 15-1/4" long by 3/4" high by 15/16" wide.

LCN Door Closer 4040SE Track Assembly 4040SE-3038

Complete replacement LCN Sentronic Track.
Replaces all Sentronic tracks for the 3130SE, 4010SE, 4110SE and 4040SE Closers.
Track includes the roller, 4040SE-3034 and new mounting screws. The replacement track measures 21-3/4" on center for the mounting screws, which may be different then the 3130SE, 4010SE, 4110SE and older 4040SE Tracks.
Specify voltage, and color when ordering.

LCN Part # 4040SE-3038

International Door Closer 3020-VO Arm and Track

International Door Closer 3020-VO Arm and Track for Offset Top Arm Assembly Mortised Type (7/8" Depth of Top Rail). Track measures 12-5/8" long by 1/2" high by 1-1/4" wide.

Sico Old Style Stool Tops. This older style Sico Stool Top measures 12-3/4" diameter x 7-1/2" diagonally between holes. Black only.

The Sico Rubber Table Glide-Rubber Chair Tip is for use on Sico folding and non folding legs, having 1" outside diameter legs. Steel washer in base for added support.  An ideal replacement might be our reinforced Rubber Chair Tip RCT100XTC

Sico part # 178

1/2 Dome Acrylic Mirror, 18" diameter. Covers up to 150 square feet

The Norton PPTO PowerTrack for P7705 is a replacement piece for the P7705PTO Door Closer.  The Track includes the Slider, Soleniod and new mounting screws.  The PPTO Track is for the Push Side of the door, also known as the Stop Side because the track mounts on the jamb stop. Not available in 120 Volt.

Norton Part # PPTO24

Convex Acrylic Safety Mirror-Outdoor 26". 26" Diameter for distances up to 20'. Heavy duty mounting bracket(s) are included for easy installation in most locations.

Sico New Style Stool Tops. The new style Sico Stool Tops measure 13" diameter x 1" cone inside diameter. The replacement stool seats come in Dark blue, red and black. 

KTSICCU-Dark Blue
KTSICCR-Red
KTSICCA-Black

Sico Rubber Folding Table Glide for use on 3/8" outside diameter locking leg. Sico part number 177. 

Circular Convex Acrylic Safety Mirror 12". See around corners to eliminate dangerous blind hallways and intersections. Heavy duty mounting bracket(s) are included for easy installation in most locations. 12" diameter safety mirror.

The Norton PTO PowerTrack for 7705 is a replacement piece for the 7705PTO Door Closer.  The Track includes the Slider, Soleniod and new mounting screws.  The Track measures 21-1/4" long with a hole spacing of 19" on centers.   The PTO Track is for the Pull Side of the door, also known as the Hinge Side because you can see the hinges on that side. No longer available in 120 volt

Norton Part # PTO24

26" Diameter Acrylic 180 Degree 1/2/ Dome Mirror. 1/2 Dome Acrylic Mirror, 26" diameter. Covers up to 200 square feet.

The Jackson 201129 Track is used with the offset arms of the 20330 Door Closer.  The track measures 1/2 inch thick by 1-9/32 inches wide by 12-7/8 inches long. We can no longer get just the track.  This item will now include the arm.

Norton 7700 Series Power Track

The Norton Power Track Closer-Holders combine the functions of a single point electromechanical door holder with the proven reliability of a 7700 Series Door Closer. The track assembly contains an arm slide and solenoid operated hold open mechanism and is available with or without an integral smoke detector. The closer is mounted on the door. The Power Track and hook-up box are mounted to the frame face for pull side installations or the frame soffit for push side installations.

Two versions, the Master Unit (PTDO) and the Support Unit (PTO). The PTDO has an integral smoke detector. The PTO can be plugged into the PTDO or into your existing fire alarm system. Both units can be mount pull side of the closed door, or the push side, please specify when ordering. Specify voltage (24 volt or 120 volt) and color (aluminum or dark brown). Dark Brown is a 3 week lead time, Aluminum is in stock.

The PTDO Master Unit is no longer available, they were discontinued in the 2024.

Sico Plastic table glide, for use on heavy table have a 1" outside diameter leg.

Convex Acrylic Safety Mirror-Outdoor 30". 30" diameter For distances up to 30'. Heavy duty mounting bracket(s) are included for easy installation in most locations.

The Jackson 20368 is used with the 20330 Door Closer offset arms. Track measures 25/32 inches tall by 29/32 inches wide and 14 inches long.

The LCN Sentronic Door Closer 3130SE is a concealed overhead door closer

Standard 3130SE series closer shipped with a standard arm, 24V or 120V SE track (please specify), track roller, and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted. Handed for right or left swinging door. Interfaces with fire alarm systems.

LCN Sentronic Door Closer 3130SE parts are also available.

Circular Convex Acrylic Safety Mirror 18". See around corners to eliminate dangerous blind hallways and intersections, 18" diameter. Covers area's up to 15'. Heavy duty mounting bracket(s) are included for easy installation in most locations.

Convex Acrylic Safety Mirror-Outdoor 18". 18" diameter for distances up to 15". Heavy duty mounting bracket(s) are included for easy installation in most locations.

Circular Convex Acrylic Safety Mirror 26". 26" diameter covers distances up to 20' For indoor use only. Heavy duty mounting bracket(s) are included for easy installation in most locations.

The 4040SE Sentronic® is a heavy duty, non-handed, nonsized closer/holder designed to provide single point hold-open for fire and smoke barrier doors. The door is held open until current interruption releases the
holding mechanism and the door closes. Single lever (track) arm closer is specifically designed for interior doors. Choice of finishes, track functions, and installation accessories meet virtually all life safety requirements.

Norton 7700 Series Power Track Arm

Arm is shipped will all of the necessary hardware. This assembly includes the 7701ST-1AT Adjusting Head and Tube Assembly, and the 7701ST-1AR Adjusting Rod Assembly. The square shaft measures 7/16" x 7/16". The aluminum finish ships within 24 hours, dark bronze will take a little longer.

Norton Part # 7701ST-1A

Jackson Door Closer Offset Arm Package

Includes arm, track and screws

Jackson part # 20-1134-LC

The concealed 2030 Series Pacer® is a heavy duty closer designed to fit in a narrow, minimum 1 3/4” aluminum transom. The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements.

Specifications

• Standard 2030 series closer shipped with standard arm, standard track, mounting/finish plate, and wood and machine screw pack
• Sized cylinders for interior doors to 4’6” and exterior doors to 3’6”
• Handed for right or left swinging doors
• Aluminum frame requires minimum 1 3/4” (44 mm) x 4” (102 mm) tube
• Closers to meet ADA requirements
• Standard or optional custom powder coat finish
• Optional plated finish on arm, fasteners and finish plate

Sargent 1430 Powerglide Door Closer

• ANSI/BHMA A156.4 Grade 1
• 25-year warranty
• Versatile mounting applications permit standard, top jamb, parallel and track installations
• Adjustable Spring Power allows the 1431 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory.

Retrofits existing SARGENT 1230/1231 Series
Closer installations

Sargent 350 Powerglide Door Closer

• ANSI/BHMA A156.4 Grade 1
• UL Listed and cUL Listed to Canadian Safety Standards listed for use on fire doors
• 10-year warranty
• Versatile mounting applications permit standard, top jamb, parallel and track installations
• Adjustable spring power allows 351 closers a size range of 1 through 6. They are adjusted to size 3 before leaving the factory
• One door closer body for all applications, non-handed

We ship the Sargent 351 Door Closer

LCN Sentronic Door Closer 4310ME

Standard LCN Sentronic Door Closer 4310ME series closer shipped with a 24V or 120V cylinder (please specify) on a mounting plate, metal cover, Swing-Free arm, track, track roller, and wood and machine screw pack. See 4310ME Series pages 23 & 24 for options. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted with Swing-Free arm engaged. Handed for right or left swinging door. Concealed or exposed electrical connections. Built-in “On/Off” switch controls hold-open function. Swing-Free arm allows door to be moved without door closer resistance. Interfaces with fire alarm systems. LCN Sentronic Door Closer 4310ME part are also available.

Threaded Stem Single Wheel Caster -3" Wheel -3/8-16 Thread, 1 1/2" long stem. Zinc finish with black rubber wheels. Available for treads for carpet and non carpet areas. 

KK7641 for Hard Tread for Carpet

KK7462 for Soft Tread for Non Carpet Surface

Cubicle Track End Stops

Cubicle Straight Track 8' Length Only. Track carrier and curtain sold separately. 1-3/8” x 3/4” x .058” extruded 6063-T5 satin anodized aluminum.

Threaded Stem Twin Wheel Caster -2" Wheel -3/8-16 Thread, 1 1/2" long stem. Chrome hood with black wheels. Available with tread for carpet and non carpet areas. 

 KK8411 for hard tread for carpet

KK8412 for soft tread for non carpet surfaces

Sargent 281 Powerglide Door Closer

ANSI/BHMA Grade 1 (A156.4)
• Meets Buy American Act
• Ten Year Warranty
• Versatile mounting applications permit
standard, top jamb, parallel and track
installations
• UL and cUL listed for use on fire doors
• Adjustable spring power allows 281
closers a size range of 1 through 6. They
are adjusted to Size 3 before leaving the
factory
• One door closer body for all applications,
non-handed

Replaces the older Sargent 1250 and 1251 door closers, mounting holes will match

Threaded Stem Twin Wheel Caster -2" Wheel -1/4-20 Thread, 5/8" long stem. Chrome hood with black wheels. Available with tread for carpet and non carpet areas. 

KK8111 for hard tread for carpet

KK8112 for soft tread for non carpet surfaces