Doors | Dark Bronze
-
Von Duprin Exit Device 88 Lever Arm Right Hand
Von Duprin Exit Device 88 Lever Arm Right Hand
Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. Includes the dog screw, wedge ring, wedge tite screw and wedge, and sometimes they come with the axle
Von Duprin Part # 050438
Old Part # 10074488R80- -
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.
Von Dupin part # 050439
Old Part # 10072988R70- -
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Replacement Grip/Handle only, screws not included. Cast bronze construction, and then plated to the selected finish. The Grip measures 15/16" wide by 6" long. The center to center hole spacing is 5-1/2". This handle works on the Von Duprin 608, 696, 880, and 990 outside trim plates.
Von Duprin Part # 972466 and 972467
Old Part # 969925 and 959122G972466- -
Von Duprin 8827-F Top Latch Cover Kit
Von Duprin 8827-F Top Latch Cover Kit - 050465
This is the Top Latch Cover for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Durpin Part # 050465
Old Part # 96120688VR30F -
Von Duprin Exit Devices 608/880/990TP Thumb Piece
Von Duprin Exit Devices 608/880/990TP Thumb Piece
Replace thumb piece only, rivet not included. Cast bronze construction, and then plated to the selected finish. 5-1/8" overall length, but note that the length is usually cut down in the field depending on the thickness of your door.
Von Duprin Part # 970488
Old Part # 960303G970488- -
LCN 4630 Low Energy Door Closer
LCN 4630 Low Energy Door Closer
The 4630 AUTO EQUALIZER is LCN’s SMART & RELIABLE electrically powered low-energy power operator. It provides easy access for people with disabilities, or the elderly. Designed primarily for manual opening applications that occasionally required automatic opening.
4631- -
LCN 4640 Low Energy Door Closer
LCN 4640 Low Energy Door Closer
The 4640 AUTO EQUALIZER is LCN’s SMART & RELIABLE electrically powered low-energy power operator. It provides easy access for people with disabilities, or the elderly. Designed primarily for manual opening applications that occasionally required automatic opening.
4642- -
LCN 4810 Door Closer Pneumatically Operated
LCN 4810 Door Closer Pneumatically Operated
The 4810 AUTO EQUALIZER is LCN’s pneumatically powered MULTI-DOOR solution. This low-energy automatic operator provides easy access for people with disabilities, or the elderly. Designed primarily for manual opening applications that occasionally require automatic opening.4811- -
LCN 4820 Door Closer Pneumatically Operated
LCN 4820 Door Closer Pneumatically Operated
The 4820 AUTO EQUALIZER is LCN’s pneumatically powered MULTI-DOOR solution. This low-energy automatic operator provides easy access for people with disabilities, or the elderly. Designed primarily for manual opening applications that occasionally require automatic opening.4820- -
LCN Sentronic Door Closer 4410ME
LCN Sentronic Door Closer 4410ME
Standard LCN Sentronic Door Closer 4410ME series closer shipped with a 24V or 120V cylinder (please specify) on a mounting plate, metal cover, regular arm, and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted. Handed for right or left swinging door. Concealed or exposed electrical connections. Built-in “On/Off” switch controls hold-open function. Interfaces with fire alarm systems.
LCN Sentronic Door Closer 4410ME parts are also available.
4410ME -
LCN Sentronic Door Closer 3130SE
The LCN Sentronic Door Closer 3130SE is a concealed overhead door closer
Standard 3130SE series closer shipped with a standard arm, 24V or 120V SE track (please specify), track roller, and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted. Handed for right or left swinging door. Interfaces with fire alarm systems.
LCN Sentronic Door Closer 3130SE parts are also available.
3130SE -
LCN SEM7820 Magnetic Door Holder
LCN SEM7820 Magnetic Door Holder
LCN SEM7820 features a metal die cast housing that is surface mounted on the floor. Tri-voltage design works with 12, 24 or 120 volts, with 35 lbs. of holding force. The magnet housing measures 5-1/8" long x 4-9/16" wide and 3-7/16" high. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 1-5/8". The total projection of both pieces is 6-3/4". Available in an aluminum or dark bronze color.
LCN Part # SEM7820
Armature extensions are available, along with replacement covers, magnets, and armatures.
SEM7820- -
LCN 4040XP-HCUSH Door Closer
LCN 4040XP-HCUSH Door Closer
The same 4040XP Door Closer with the HCUSH (Hold Open Cush) arm 4040XP-3049CNS.
- Strongest Pinion Ever - At 3/4”, It’s The Super Hero Of Pinions
- Taller Bearings - 5/8”, Real Muscle Against Forced Openings And Closings
- An Overall 44% Increase In Maximum Load Capacity
- Tougher Teeth - Fight Wear And Tear
- V-Shield Seal With 20% Longer Life
- Better Wear Resistance From Sagging Doors And Warped Frames
- XP = eXtra Protection In Real-World Applications
We ship the 4041XP-HCUSH
4040HCUSH- -
LCN 4110 HCUSH Hold Open Door Closer
Standard 4110 series closer shipped with HOLD OPEN CUSH N STOP arm, standard plastic cover, 4110-201 FIFTH SCREW SPACER and self reaming and tapping screws. Sized cylinders adjustable for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder adjustable for interior doors to 4’6” and exterior doors to 3’6”. Closer mounts parallel arm, specify right or left swinging door. 4111 cylinder meets ADA requirements. The cush hold open arm allows for a stop and hold open positions up to 110 degrees. "T" handle on arm will release door for closing, locking pin can be retracted for normal door closing operation.
We ship the 4111 HCUSH
4110HCUSH- -
LCN 4010 Fusible Link Door Closer
LCN 4010 Fusible Link Door Closer
Standard 4010 series closer is shipped with fusible link arm, standard plastic cover, and self reaming and tapping screws. Sized cylinders for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder (4011) adjustable for interior doors to 4’6” and exterior doors to 3’6”. Fusible link melts at 120 degrees and allows the door to close. Closer mounts hinge side, specify right or left swinging door. 4011 cylinder meets ADA requirements.
We ship the 4011 FL
4010FL- -
LCN 4020 Fusible Link Door Closer
LCN 4020 Fusible Link Door Closer
Standard 4020 series closer shipped with Fusible Link arm, standard plastic cover, and self reaming and tapping screws. Sized cylinders for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder adjustable for interior doors to 4’6” and exterior doors to 3’6”. Closer mounts top jamb (push side), specify right or left swinging door. 4021 cylinder meets ADA requirements.
we ship the 4021 FL
4020FL -
LCN 4110 Fusible Link Door Closer
LCN 4110 Fusible Link Door Closer
Standard 4110 series closer shipped with Fusible Link arm, standard plastic cover, 4110-201 FIFTH SCREW SPACER and self reaming and tapping screws. Sized cylinders adjustable for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder adjustable for interior doors to 4’6” and exterior doors to 3’6”. Closer mounts parallel arm, specify right or left swinging door. 4111 cylinder meets ADA requirements.
We ship the 4111 FL
4110FL -
LCN 4040XP-CUSH Door Closer
LCN 4040XP-CUSH Door Closer
The same 4040XP Door Closer with the CUSH (Non Hold Open Cush) arm or 3077CNS arm.
- • Strongest Pinion Ever - At 3/4”, It’s The Super Hero Of Pinions
- Taller Bearings - 5/8”, Real Muscle Against Forced Openings And Closings
- An Overall 44% Increase In Maximum Load Capacity
- Tougher Teeth - Fight Wear And Tear
- V-Shield Seal With 20% Longer Life
- Better Wear Resistance From Sagging Doors And Warped Frames
- XP = eXtra Protection In Real-World Applications
We ship the 4041XP-CUSH
4040CUSH- -
LCN 4040XP Hold Open Door Closer
LCN 4040XP Hold Open Door Closer
The same 4040XP Door Closer with the Hold Open Arm arm 4040XP-3049.
- Strongest Pinion Ever - At 3/4”, It’s The Super Hero Of Pinions
- Taller Bearings - 5/8”, Real Muscle Against Forced Openings And Closings
- An Overall 44% Increase In Maximum Load Capacity
- Tougher Teeth - Fight Wear And Tear
- V-Shield Seal With 20% Longer Life
- Better Wear Resistance From Sagging Doors And Warped Frames
- XP = eXtra Protection In Real-World Applications
We ship the 4041XP Hw/PA
4040H- -
LCN 4110 HEDA Hold Open Door Closer
Standard 4110 series closer shipped with EXTRA DUTY HOLD OPEN arm, standard plastic cover, 4110-201 FIFTH SCREW SPACER and self reaming and tapping screws. Sized cylinders adjustable for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder adjustable for interior doors to 4’6” and exterior doors to 3’6”. Closer mounts parallel arm, specify right or left swinging door. 4111 cylinder meets ADA requirements. The friction hold open arm allows for adjustable stop hold open positions up to 180 degrees.
We ship the 4111 HEDA
4110H- -
LCN 4040XP Door Closer
LCN 4040XP Door Closer
- Strongest Pinion Ever - At 3/4”, It’s The Super Hero Of Pinions
- Taller Bearings - 5/8”, Real Muscle Against Forced Openings And Closings
- An Overall 44% Increase In Maximum Load Capacity
- Tougher Teeth - Fight Wear And Tear
- V-Shield Seal With 20% Longer Life
- Better Wear Resistance From Sagging Doors And Warped Frames
- XP = eXtra Protection In Real-World Applications
We ship the 4041XP Rw/Pa (Regular Arm with Parellel Arm Bracket)
4040XP- -
LCN Door Closer Spring Cush Hold Open Arm
LCN Door Closer Spring Cush Hold Open Arm 3049SC
Optional, parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function.
Specify your current closers model number when ordering. Not all
of the LCN closers have the same shape spindle on the door closer
cylinder. The LCN Part #'s on this Regular Arm is: 1460-3049SC, 4040-3049SC, 4110-3049SC3049SC -
LCN SEM7850 Magnetic Door Holder
LCN SEM7850 Magnetic Door Holder
LCN SEM7850 features a metal die cast housing that is surface wall mounted. Tri-voltage design works with 12, 24 or 120 volts, with 35 lbs. of holding force. The magnet housing measures 2-13/16" wide by 4-5/8" high. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 1-5/8". The total projection of both pieces is 3-5/8". Available in an aluminum or dark bronze color.
LCN Part # SEM7850
Armature extensions are available, along with replacement covers, magnets, and armatures.
Outlet box not included
SEM7850- -
LCN SEM7830 Magnetic Door Holder
LCN SEM7830 Magnetic Door Holder
LCN SEM7830 features a die cast metal housing that is surface wall mounted. Tri-voltage design works with 12, 24 or 120 volts, with 35 lbs. of holding force. The magnet housing measures 2-13/16" wide by 4-5/8" high. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 1-5/8". The total projection of both pieces is 4-1/8". Available in an aluminum or dark bronze color.
LCN Part # SEM7830
Armature extensions are available, along with replacement covers, magnets, and armatures.
SEM7830-
