Exit Devices
Exit Devices and Hardware to Ensure Safety in Your Commercial Building
At Robert Brooke & Associates, we are known for being a top distributor of exit devices (also sometimes called panic devices) and hardware from highly-esteemed and trusted brands throughout the door security industry. The exit devices we have available can be newly installed on doors in various facilities with a constant inflow of visitor traffic. We also sell door hardware that can replace old or worn down hardware on your previously-installed devices.
Having a security system in place on doors has become crucial to the safety of visitors in a building. Whether in a school, office, or another type of building, regulars and visitors deserve to feel safe. One reason we entered into the industry was to be able to provide consumers with exit devices that can potentially minimize danger in buildings everywhere.
Our selection consists of surface vertical rod devices, concealed vertical rod devices and more. Don’t forget, we also have a wide selection of replacement hardware to keep your exit devices up-to-date and in excellent condition.
Exit Device Manufacturers
We carry several different styles of exit devices all made by reputable manufacturers. From Dorma exit devices to exit devices by Von Duprin, we have what you’ve been searching for! Plus, we have replacement door hardware for these devices from several first-rate brands in the industry. For a brief overview of each manufacturer and their products available in our selection, see below.
- Adams Rite
- Cal-Royal
- Corbin Russwin
- Detex
- Dorma Exit Devices
- Dor-O-Matic
- International Devices
- Jackson Exit Devices
- Monarch (Falcon) Exit Devices
- Sargent Exit Devices
- Exit Devices by Von Duprin
- Yale Exit Devices
High-Quality Exit Devices
Our website offers a convenient search tool so that customers are able to do a quick search for a specific item they are looking for. If there is no specific search in mind, browsing the array of panic devices will assist in narrowing down the options.
Our available selection includes surface vertical rod, concealed vertical rod, touch bar, push bar, heavy-duty exit devices and a number of other styles that you can order straight from our website. With several of these, you will have the option to choose the color, finish and size that you prefer.
Make note of whether you will need to order panic devices that work on single doors or ones that work on double doors for your installation project. Depending on the product, the panic devices on our website can work on either single or double. Reading the details will also tell you whether they are left-handed, right-handed or non-handed.
Click on the product image or text to find more dimensional and pricing information, along with the type of doors that the product can be used with. Remember to keep this information in mind when ordering your panic devices for your school, business, office, organization, athletic center or other facility.
Door Hardware for Exit Devices
We also carry an assortment of hardware for when a replacement part is needed to repair an exit device. The type of hardware that is required to make repairs to your exit device will depend on what type of device has been installed on the commercial building doors.
Dog keys, strike plate assemblies, end caps, dogging pins, mounting base kits, solenoids, lever trims, lever springs, spring retainer hubs and screws are just a few of the replacement parts that we have available in our online selection. Whatever the reason be that you require new hardware, we have the best replacement parts for you that will do just the trick. We can help you choose the best hardware to get your exit device working good as new.
Check Out Our Shipping and Handling Policy
Be sure to read our online product descriptions of each device and piece of hardware that you are interested in purchasing. The product description will have the shipping details for that particular item.
The shipping times will vary. If the Lead Time next to the product is In Stock, then the items that you chose to order will be shipped from our warehouse with no delay. The Lead Time for a product can also be a day, a week or more. In this case, your order will take longer to ship because it will be coming from the manufacturer.
Order Your Exit Devices Online
Buy your exit devices and door hardware online today! We not only have a supply of Sargent exit devices and exit devices by Von Duprin, but we also have so much more that can be shipped to you immediately.
We want to make sure that you are comfortable with your order and that any question you have is answered in a timely manner. Contact us with questions before you move forward with checking out and we will give you expert answers.
-
Exit Device Dog Key 5/32" X 2-1/8" Long
Exit Device Dog Key 5/32" X 2-1/8" Long
Used on Von Duprin 55 and 88 Exit Devices, Corbin Russwin Exit Device, Yale Exit Device and Dor-o-Matic exit devices. This Hex Dog Key is not long enough for the Von Duprin 33, 34, 33A, 35B, 98 or 99 Exit Devices.
also known as Hex Key, Dog Key, Allen Key, Dogging Key
88R60-SHORT -
Von Duprin 55 End Case
The Von Duprin 55 End Case is the housing on the hinge side of the door. The function of this housing is to lift the cross bar, and support the function of the Active Case. If your housing is on the right side when standing inside looking out, then you would order the Right Hand Case. The package includes the housing, springs and back plate, the arm is not included. The current part number on this part is 050196 and 050197, the old part number is 111931 and 111932.
55R30 -
Yale 7100 Series Latch Assembly
Yale 7100 Series Latch Assembly
This latch assembly is used on non fire rated doors, meaning panic devices that you can not dog open with the allen key or key cylinder. Non fire rated doors are usually exterior doors.
Yale Part # 60-7000-0419-048
Note the position of the Hub for this Assembly is the 7100
G6070000419048 -
Yale 7100F Series Latch Assembly
Yale 7100F Series Latch Assembly
This Yale Latch Assembly is used on fire rated panic devices. A fire rated panic is a device were you can not lock the latch in the open position. It is used on doors were the engineers want the door to latch every time it closes to contain a fire.
Yale Part # 60-7000-0425-048
Note the Hub Position of this latch is the 7100
G6070000425048 -
Corbin Russwin ED2200 Rim Exit Device
Single Door; Easy-To-Use Pushpad for Quick Egress and ADA Compliance; Low Profile and Projection for Barrier-Free Code Compliance; No Projecting Parts to Inhibit Egress; Single Point Latching. School and University; Health Care; Government and Public; Commercial and Industrial; Office and Retail; Transportation and Utilities; Hotels and Conference Centers; Religious
For 36" doors, aluminum finish only.
ED2200 -
Dor-O-Matic 2390 231CA Cylinder Kit
The Dor-O-Matic 2390 231CA Cylinder Kit converts your 2390 exit only to a Night Latch or Hold Back function key lock. All the hardware is included in the package to convert your device, except for the Mortise Cylinder. Housing measures 4-1/2" tall by 1-11/16" wide with a 1-1/8" projection. We send the 231CA which includes the Schlage B502-191 Cam. The 239CA is the same kit, but without the Schlage Cam.
Discontinued item, we only have a few left in Dark Bronze.
231CA- -
Cal Royal 4400 Exit Device
The Cal Royal 4400 Rim Exit Device has a Grade 2 rating. The device features a 3/4" Latchbolt, Roller Strike and a 1" diameter Crossbar. The device comes in a brushed chrome and dark bronze finish, and comes with either a 36" or 48" crossbar. You would need a 4-1/2" minimum stile width.
CR4400- -
Doromatic Surface Strike STK45
Doromatic Surface Strike STK45
This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the 1590, 1790 and 2090 Rim Devices. The strike base measures 1-5/16" wide by 3-1/4" high, and 1/4" thick. The three slots are 1-1/4" on center. This strike ships with the mounting screws.
US19-Black finish
STK45 -
Von Duprin Exit Device Old Style Dogging Assembly
The Von Duprin 050709 Dogging Assembly is used to update the Von Duprin 22, 33, 35, 98 and 99 device shipped before 1997. The dogging key on this assembly is 5/32", and you would want to use the longer version of our 88R60 dog key.
Von Duprin Part # 050709
Old Part # 050153G050709 -
International 8710S Narrow Design Rim Device
The International Door Closer (IDC) 8710S is a narrow design rim device. The minimum stile width has to be 2-19/32 inches. The device features a 3/4 inch throw deadlocking latchbolt, hex key dogging, and ships with machine screws and strike. The device is Grade 1 Rated, which is the highest rating possible. The 36 inch device is 33-15/32 long and the 48 is 44-3/4 inches.
8710S- -
International 8730S Narrow Design Surface Vertical Rod
The International Door Closer 8730S is designed for narrow stiles. The minimum stile width is 2-19/32 inches. It will not work on a true narrow stile door witch is usually 1-3/4 inch. The 36 inch version is 33-15/32 inches and the 48 inch version is 44-3/4 inches. The device is rated Grade 1, which is the highest rating. Rods are 1/2 inch diameter tubular with rod guides. The exit ships will all screws and strikes need for instillation.
8730S-
