Partition Parts| Generic
Robert Brooke & Associates is a leading commercial bathroom stall hardware parts provider with over 35 years of experience in the stalls and toilet partition hardware industry. We have worked with various organizations throughout the years to provide them with everything they need for their commercial restrooms including bathroom partition hardware. We have had the pleasure of distributing bathroom stall hardware for schools, churches, athletic centers and other facilities with heavy restroom traffic.
We sell a variety of bathroom stall hardware including but not limited to brackets, coat hooks, door pulls, hinges, latches, keepers and stoppers. For high-quality, affordable commercial bathroom stall hardware, look no further than Robert Brooke & Associates.
Restroom Stall Parts Manufacturers
If you like to purchase bathroom stall hardware and equipment from reputable brands, you’ll be pleased to know that we carry hardware from some of the most trusted restroom stall hardware manufacturers in the industry. You can be confident when placing your order with us knowing that we only sell restroom stall parts from highly respected brands.
The manufacturers that we distribute parts from produce strong and durable bathroom stall hardware that lasts for a long time. These are United States and Canadian companies whose main focus is manufacturing quality-made restroom stall hardware for consumers. A few of these restroom stall hardware brands also have an extended inventory that includes washroom accessories.
As suppliers of the Grade A products that these brands create, we are used to seeing satisfied customers who order bathroom stall hardware from our online store. Let us know if you come up with any questions about one of the restroom stall parts brands and we will assist you promptly.
Our Bathroom Stall Parts Supply
We have many parts to choose from in our supply of bathroom partition hardware. Be sure to choose the correct bathroom stall hardware before you place your order.
A specific brand of bathroom stall door hardware might only be of good use on that specific brand of stall, so check the name tag on your toilet stalls before shopping for your parts. For example, you will only be able to use an Accurate Bolt Latch Slide Pin on metal stalls that were manufactured by the Accurate brand.
We also sell other bathroom stall door hardware that will only work on stalls made out of a specific material. The Flush Metal Top Hinge Pin ⅜ inch X 3-¼ inch is one example of restroom stall hardware that was made to be used on laminate stalls. You will find that some of the other bathroom partition hardware we carry should only be used on laminate stalls.
There are some bathroom stall parts that we sell that will work with more than one brand of partitions. For example, the Cast Stainless Steel Slide Bolt Latch that is 1-½ inch W X 3-¼ inch L, 2-¾ inch between screws is a piece of stainless steel bathroom stall hardware that can be used on both Accurate and Global stalls.
We have pages and pages of bathroom stall hardware to look through. If you already know exactly what restroom stall hardware you need, then you might want to make it easier by narrowing your search in our Search Bar. To get more information on our supply of bathroom stall parts, please visit our RBA Partitions and Parts Catalog.
Questions About Bathroom Stall Hardware
Please direct your bathroom stall hardware related inquiries to our main office by phone call or email. The team at Robert Brooke & Associates is ready to answer your questions about the bathroom stall door hardware that we carry.
Please contact us during business hours so that we can help you out if you get stuck on something while shopping our bathroom stall door hardware selection. Call our phone at 1 (800) 642-2403 or send an email to one of our professionals at Sales@RobertBrooke.com.
-
Chrome Plated Bottom Hinge Assembly For 1" Door, 1-1/4" Pilaster Sq
Toilet Partition Bottom Hinge Assembly Chrome Plated For 1" Thick Door, 1-1/4" Pilaster Square Edge
Polished chrome plated zamac die cast construction. Kit includes Bottom Hinge, Pintle, Nylon Cam, and Bottom Hinge Door Insert. Bottom hinge measures 2-1/4" high by 1-1/4" wide with screw spacing of 1-1/2". Mounting lug projects out 1-1/4". Also known as a Bathroom Stall Bottom Hinge Kit. Manufacture part number 63710.
Screws are also included.
9A3710 -
Cast SS Keeper Bumper For 1" Sq Post Outswing
Partition Keeper Bumper For 1" Square Post Outswing Cast Stainless Steel
Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5723.
Shipped with mounting screws.
9A5723 -
Partition Headrail 1-1/4"X65" Type B
Partition Anti-Grip Headrail 1-1/4" X 62" Type B Aluminum
Extruded anodized aluminum construction. The cross section measures 2-3/4" high by 1-11/32" by 65" long. The part that fits on top of the pilaster is 1-1/4" wide by 3/4" deep. The wall thickness on this part is 3/64". Also known as a Bathroom Stall Headrail. Manufacture part # 80052.
Also know as Part# 9THS621-1/4, 9THSSXX, and 9THLXX.
9HR62B2 -
Cast SS Ada Door Handle 3"H X 5-1/8"L
Partition Ada Door Handle 3-3/8" Projection X 5-1/2" Wide Cast Stainless Steel
Cast stainless steel construction. This handle a ADA compliant. The handle base is 2" diameter with 3 mounting holes on each base. The handle is made of 3/8" daimeter material. The under clearance for the handle is 3". Also known as a Bathroom Stall Door Pull. Manufacture part # 6253.
9A0625 -
Cast SS Door Stop 2" High
Partition Door Stop 2" High Cast Stainless Steel
Cast stainless steel construction. The door stop base is 2-1/8" diameter with a 1-19/32" hole spacing. The stop projects out 2" with a rubber insert on the end of the stop. Also known as Bathroom Stall Door Stop. Manufacture part # 4123.
9A4123 -
Chrome Plated One Ear Bracket For 1-1/4" X 1-1/2" x 2-1/2"
If your toilet partition (bathroom stall) wall bracket is cast 1840, then you have the One Ear Wall Bracket for 1-1/4″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 2-3/4″ long with 1-1/2″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall One Ear Bracket, Toilet Partition One Ear Bracket, Single Leg Bracket or Wall Bracket.
9A0184 -
Cast SS Two Ear Bracket For 7/8" Panel
Partition Two Ear Wall Bracket For 7/8" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 3-1/2" with 2-3/4" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall Two Ear Wall Bracket, or Two Ear 7/8". Manufacture part # 1633
Shipped with mounting screws.
9A1633 -
Aluminum Bracket Two Ear 1" Panel 1-1/2" x 2-3/4"
Toilet Partition Bracket Two Ear For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 1-1/2" high by 3-3/4" wide, with mounting screws at 2-3/4" on center. Legs project out at 2-3/4" with the thru hole at 2-1/2" for the back of the base. The legs are 1" apart. Also known as a Bathroom Stall Two Ear Wall Bracket and Toilet Partition Two Wing Wall Bracket. The manufacturers part numbers are 1754, 650-1839, and 40-8445210. Bracket is shipped with all the fasteners.
9A1754 -
Stamped SS Continuous 'U' Bracket 1 x 1-3/8 X 57
Toilet Partition Continuous 'U' Wall Bracket For 1" Thick Panel 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 1-1/8" x 57" long. Legs project out 1-1/2" with the thru hole at 1-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall Continuous U Wall Bracket. Manufacturer part # 2369.
Screws included with bracket.
9A2369 -
Chrome Plated Top Hinge Assembly For 7/8" Door, 1-1/4" Pilaster Sq
Toilet Partition Top Hinge Assembly For 7/8" Thick Door, 1-1/4" Pilaster Square Edge Chrome Plated Polished chrome plated zamac die cast construction. Kit includes Top Hinge, Pintle, Nylon Cam, and Top Hinge Door Insert. Bottom hinge measures 2-1/4" high by 1-1/4" wide with screw spacing of 1-1/2". Mounting lug projects out 1-1/4". Also known as a Bathroom Stall Bottom Hinge Kit. Manufacture part number 63020. Screws are also included.9A3020 -
Cast SS Keeper Bumper For 1-1/4" Sq Post Outswing
Partition Keeper Bumper For 1-1/4" Square Post Outswing Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5213.
Shipped with mounting screws.
9A5213 -
Chrome Plated Keeper Bumper Flat Stop 1-1/2" Screws
Chrome Plated Toilet Partition Keeper Bumper Flat Stop 1-1/2" Between Screws
Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-13/16" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. The slot is for the concealed latch is 7/8" high by 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5240
Shipped with mounting screws.
9A5240 -
Cast SS Door Pull 3-1/2" Between Screws
Partition Door Pull 3-1/2" Between Screws Cast Stainless Steel
Cast stainless steel construction. The pull measures 4-3/4" wide and projects 1" with a hole spacing of 3-1/2". The mounting holes are threaded for a 10-24 screw. Also known as a Bathroom Stall Door Pull. Manufacture part # 5403.
9A5403 -
Partition Headrail 1-1/4"X 95" Type B
Partition Anti-Grip Headrail 1-1/4" X 95" Type B Aluminum. Extruded anodized aluminum construction. The cross section measures 2-3/4" high by 1-11/32" by 95" long. The part that fits on top of the pilaster is 1-1/4" wide by 3/4" deep. The wall thickness on this part is 3/64". Also known as a Bathroom Stall Headrail. Manufacture part # 80052.
9HR98B2 -
Door Stop Pilaster Mounted Polished Stainless Steel
Door Stop, Pilaster Mounted, 2-1/2" X 4-1/4", Door Stop Pilaster Mounted Polished Stainless Steel
Polished Stainless Steel Construction. The door stop base is 3" wide by 1-1/4" high with a 2-5/16" hole spacing. The stop projects out 2-1/2" and has a rubber insert in it. This door stop is usually mounted on the pilaster or post. Also known as a Bathroom Stall Door Stop. Manufacture part # 4155.
9A4151 -
Torx driver bit T27
Torx driver bit T27 for toilet partition security screws. These torq heads screws are used with brackets that hold the partitions together. This torx bit is for a T27 size and is hollow for a screw with a pin sticking out in the middle of head of the screw and uses a 1/4" shank bit.
TBIT -
Chrome Plated Two Ear Bracket For 3/4" x 1-1/2" x 2-1/2"L
If your toilet partition (bathroom stall) wall bracket is stamped 1620, then chances are you have the Two Ear Wall Bracket for 3/4″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 3″ long with 2-7/32″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall (toilet partition) Two Ear Bracket or Wall Bracket
9A0162 -
Cast SS Two Ear Urinal Bracket 1" X 1-1/2" X 2-1/2"
Toilet Partition Two Ear Urinal Wall Bracket For 1" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" centers on the mounting holes. The bracket legs project out 2-1/2" with the thru hole at 2-1/8" from the back of the base. Walls are 1/8" thick. Also know as a Bathroom Stall Partition Urinal Screen Bracket - Two Ear 1". Manufacture part # 1613.
Ships with mounting screws.
9A1613 -
Aluminum Bracket Two Ear For 1" Panel, 3" H X 2-3/4" L
Toilet Partition Bracket Two Ear For 1" Thick Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3" high by 3-3/4" wide with the mounting holes 2-3/4" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The 8 holes are 1/4" diameter. All wall thicknesses are 1/8". This bracket is sometimes known as a Bathroom Stall Two Ear Wall Bracket, or Toilet Partition Two Ear Wall Bracket. The manufacturers part number is 2264 and 650-1839. This bracket ships with all the needed fasteners.
9A2264 -
Stamped SS Continuous One Ear Bracket 1" x 2-1/2" X 54"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel x 54" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-1/2" x 54" long. Mounting holes are 1-15/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2879.
9A2879 -
Chrome Plated Bottom Hinge Assembly For 7/8" Door, 1-1/4" Pilaster
Toilet Partition Bottom Hinge Assembly For 7/8" Door, 1-1/4" Pilaster
Polished chrome plated zamac die cast construction. Kit includes Bottom Hinge, Pintle, Nylon Cam, and Bottom Hinge Door Insert. Bottom hinge measures 2-1/4" high by 1-1/4" wide with screw spacing of 1-1/2". Mounting lug projects out 1-1/4". Also known as a Bathroom Stall Bottom Hinge Kit. Manufacture part number 63010.
Screws are also included.
9A3010 -
Chrome Keeper Bumper Flat Stop 1-1/2" Outswing
Chrome Plated Toilet Partition Keeper Bumper Flat Stop 1-1/2" Between Screws, For Outswing
Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-5/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5260
Shipped with mounting screws.
9A5260 -
Cast SS Keeper Bumper Inswing 1" Post Sq Edge
Partition Keeper Bumper Inswing 1" Post Square Edge Cast Stainless Steel
Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. The slot is 5/16" deep by 1-1/2" high. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing 1". Manufacture part # 5623.
Shipped with mounting screws.
9A5623 -
Pilaster Anchoring Device For 3/4"And Thicker & Up To 6 "Width
Toilet Partition Pilaster Anchoring Device
Zinc plated steel construction. For 3/4" thick and larger Pilaster Posts and 3" wide and larger pilaster posts. The brackets are 11/16" wide. Also known as a Bathroom Stall Pilaster Post Anchoring Pack. All the screws are included in the package.
9A1056 -
Cast SS Door Pull Cast S.S. 2-3/4"
Partition Door Pull 2-3/4" Between Screws Cast Stainless Steel
Cast stainless steel construction. Door pull measures 4-1/16" wide by 13/16" projection with a 2-3/4" hole spacing. The holes are threaded for a 8-32 screw. Also known as a Bathroom Stall Door Pull. Manufacture part # 6203.
9A6203 -
S.S. Door Stop, Pilaster Mounted, 2-1/2" X 4-1/4"
Door Stop, Pilaster Mounted, 2-1/2" X 4-1/4", Stainless Steel.
Cast Stainless Steel construction. The door stop base is 3" wide by 1-1/4" high with a 2-5/16" hole spacing. The stop projects out 2-1/2" and has a rubber insert in it. This door stop is usually mounted on the pilaster or post. Also known as a Bathroom Stall Door Stop. Manufacture part # 4153.
9A4153 -
Continuous Aluminum Door Stop for 1" panel Inswing
Toilet partition continuous aluminum door stop for 1" panel Inswing doors. This product is clear anodized aluminum. This full length door stop with block the gap between the door and the post next to it. For an inswing the slot is 3/8"x1-1/4" wide for the slide latch to latch it. The door keeper and strike is 54" in length and has 5 holes spaced at 13" apart and starts at 1" from the top and the bottom. Also known as 134304 strike & keeper channel. Includes all hardware.
9A134304
