Manufacturers| Ampco Toilet Partition
We are leading bathroom stall door hardware distributors. We sell bathroom stall door hardware that was manufactured by top name brands in the bathroom stall hardware commercial market today.
If you are working on renovating a commercial bathroom in a public building, you’ll want to be sure you’re using toilet stall door hardware that was produced by highly regarded stall manufacturers. This will ensure that the bathroom partition hardware that you use is tough and damage resistant for the long haul.
At Robert Brooke & Associates, we want your shopping experience to be a cinch. That’s why we have a website where you can order bathroom stall parts online from the cozy setting of your home or office.
Our warehouse and office location is Troy, Michigan, but we ship toilet partition hardware across the United States and to Canadian locations. Check the Lead Time to see if your item is in stock at our warehouse to get a rough estimate of when it will ship and then place your order. We will get started on putting together your shipment ASAP whether we currently have the items that you need at our warehouse or they are only currently available at the manufacturer’s factory.
Toilet Stall Hardware Manufacturers
Below you will find a list of the manufacturers we work with. You can gather some important info about these brands by visiting their webpage. If you already know the name of the brand that makes the bathroom stall door hardware that you need for your renovations or repairs, then you’re already halfway there.
- Accurate bathroom stall parts
- All American toilet stall door hardware
- American Sanitary stall parts
- Ampco toilet stall door hardware
- Bobrick toilet stall door hardware
- Fiat toilet stall hardware
- Flush Metal bathroom stall parts
- General bathroom stall parts
- Generic (non-brand) bathroom stall door hardware
- Global bathroom stall door hardware
- Hadrian bathroom stall door hardware
- Hiny Hiders partition parts
- Knickerbocker partition parts
- Metpar bathroom stall door hardware
- Mills partition parts
- Sanymetal bathroom stall hardware
Bathroom Stall Door Hardware Sold Online
Have you seen our extensive online selection of toilet stall hardware? You will undoubtedly have plenty of options when choosing the most suitable restroom stall door hardware for your restroom project.
Our restroom stall door hardware consists of assorted parts that will come in handy when refurbishing a public restroom or replacing a worn-out stall part in a commercial restroom. Our supply includes hinges, latches, keeper bumpers, pintles, hinge pins, hinge cams, hinge repair kits, coat hooks, pilaster shoes, door pulls, door stops and more restroom stall door hardware made by prominent manufacturers in the restroom stall industry.
Restroom Stall Door Hardware Distributors
Our company has been supplying dependable bathroom stall door hardware for more than 40 years. We have built a team made up of highly qualified and experienced professionals who have expertise in the bathroom stall hardware commercial industry.
Our team has worked with many businesses and organizations such as athletic facilities, educational institutions, convention centers and warehouses to name a few. We love providing bathroom partition hardware that our customers can feel confident when using to make necessary repairs to the commercial restrooms they are fixing up.
Our experts are hard at work supplying our customers with the best stall hardware made by respected bathroom stall part manufacturers, but we will always take the time out to assist you when you have an order question. You are welcome to contact us at Sales@RobertBrooke.com or at 1 (800) 642-2403 about your order of toilet partition hardware from our site if you require any type of assistance.
-
Ampco Bottom Cam Housing Chrome Plated
Ampco Partitions Bottom Cam Housing Chrome Plated
Chrome plated Zamac die cast construction. The housings outside dimensions are 3-1/8" wide by 1-5/32" deep by 1-7/16" high. The screw hole is 7/32" diameter. The square slot is 1" by 15/16". The square bulge were the screw is located is 1-1/2" by 1-5/32". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4060
91005BC. -
Ampco Coat Hook Bumper
Chrome plated Zamac die casting construction. Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4000.
96200B -
Door Stop 2" High
Partition Door Stop 2" Projection
Chrome plated Zamac die cast construction. The door stop base is 2-1/8" diameter with a 1-19/32" hole spacing. The stop projects out 2" with a rubber insert on the end of the stop. Also known as Bathroom Stall Door Stop. Manufacture part # 4120.
9A0412 -
Outswing Keeper Bumper, 1-1/4" Round Edge
Outswing Keeper Bumper, 1-1/4" Round Edge
Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5570.
Shipped with mounting screws.
9A5570 -
Inswing Keeper Bumper 1-1/4" Round Edge
Toilet Partition Inswing Keeper Bumper 1-1/4" Round Edge Post
Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 1/4" deep. The opening to mount it on the round edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5580
Shipped with screws for mounting.
9A5580 -
Outswing Keeper Bumper, 1-1/4" Post Sq Edge
Outswing Keeper Bumper, 1-1/4" Post Sq Edge
Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-13/16" deep. The strike is 1/2" thick with rubber insert. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5970
Shipped with screws for mounting.
9A5970 -
Keeper Bumper Inswing 1-1/4"
Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5980
Shipped with screws for mounting.
9A5980 -
Ampco Bottom Cam Housing Unplated
The Ampco Bottom Cam Housing Unplated is constructed of Zamac die cast metal. The housings outside dimensions are 3-1/8" wide by 1-5/32" deep by 1-7/16" high. The screw hole is 7/32" diameter. The square slot is 1" by 15/16". The square bulge were the screw is located is 1-1/2" by 1-5/32". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4066.
9C0140. -
Bottom Hinge For 1-1/4 Round Edge
Bottom Partition Hinge For 1-1/4" Round Edge Post Or Pilaster
Chrome plated Zamac die cast construction. The hinge measures 1-1/4" deep by 2-1/8" high by 1-7/16" wide. The U part of the hinge measures 2-1/8" high by 1-1/4" deep with a slot depth of 11/16". The hole spacing is 1-1/2". The lug projects out 1-3/32" and is 1/2" thick with a 5/16" diameter hole. Also known as a Bathrrom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 4040. Used on Ampco and Metpar Metal Partitions.
Shipped with mounting screws.
A=1-7/16"
9C3004 -
Top Hinge 1-1/4" Round Edge
Top Partition Hinge For 1-1/4" Round Edge Post Or Pilaster
Chrome plated Zamac die cast construction. The outside dimensions of the hinge are 1-1/4" deep by 2-1/2" high by 1-7/16" wide. The U mounting channel is 2-1/8" high by 1-1/4" deep with a slot depth of 11/16". The mounting holes are 1-1/2" apart on center. The lug projects out 1-3/32" by 13/32" thick with a 3/8" diameter bushing. Also know as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 4530. Used on Ampco and Metpar Metal Partitions.
Shipped with mounting screws.
A=1-7/16"
9C3503 -
Top Hinge Casting Unplated
Partition Top Hinge Casting
Unplated Zamac die cast construction. The outside dimensions of the top hinge casting are 3-7/16" high by 2-3/8" wide by 1-5/32" deep. The casting features four holes, two of them are 3/8" diameter, one is 7/32" diameter and the fourth is a threaded hole for a 5/16-18 screw. The two U channels have spacings of 13/16" and 1" on the other. Also known as a Bathroom Stall Door Insert - Top 1". Manufacture part # 4546. Used with AMPCO and Metpar Toilet Partitions.
9C3513 -
Ampco Top Hinge 1-1/4" Sq Edge, Uses 1/4" Pin
Chrome plated Zamac die cast construction. The hinge mounting U channel measures 2-1/4" high by 1-1/4" deep with an insert depth of 1-5/16". The hole spacing is 1-1/2" on centers. The hinge lug projects out 1-11/16" by 1/2" thick with a 1/4" bushing diameter. Also known as a AMPCO Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3610.
Ships with mounting screws.9C3610 -
Ampco Slide Bolt Latch
Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.
Shipped with mounting screws.
9CP100. -
Ampco Bottom Door Insert For 7/8" Door
Chrome plated Zamac die cast construction. The door insert measures 2-5/16" wide by 1" wide by 1-3/16" high. The hex shaped hole is 5/8" and the round hole is 7/32" diameter. The material or rim is 5/16" high. Also known as a Bathroom Stall Door Insert Bottom 7/8". Manufacture part # 1530.
9CP325 -
Top Hinge Door Escutcheon For 7/8 Thick Door
Partition Top Hinge Door Escutcheon For 7/8" Thick Door
Chrome plated Zamac die cast construction. The outside dimensions of the escutcheon are 1" deep by 1-5/8" high by 2-3/8" wide with two of the three holes with a diameter of 5/16" and one at 7/32". The inside dimensions of the U are 1" high by 2-1/16" wide. Also known as a Bathroom Stall Door Insert - Top 7/8". Manufacture part # 2740. Used on Metpar and AMPCO Toilet Partitions.
9CP425 -
Ampco Bottom Hinge
Chrome plated Zamac die cast construction. The hinge U channel measures 2-1/4" high by 1-1/4" deep with an insert depth of 1-5/16". The hole spacing is 1-1/2" on center. The hinge lug projects out 1-11/16" by 1/2" thick with a hole diameter of 5/16". Also known as a AMPCO Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3130.
Shipped with mounting screws.
a=1-11/16"
9F0214N
