Search results for: 'good 8 desir brook door hager'
-
Doromatic Exit Device 1690 Retainer Screw PB141
Dor-o-Matic 1690 Retainer Screw.
Doromatic part # SCREW.1074 or PB141
Dor-o-Matic 1690 Repair Parts Breakdown
GPB141 -
Doromatic Exit Device 1690 Pinion Support Bracket PB312
Dor-o-Matic 1690 Pinion Support Bracket. Bracket holds pinion tip so that it will not slip
Doromatic part # BRKT.478, BRKT.133 or PB312
Dor-o-Matic 1690 Repair Parts Breakdown
GPB312 -
Doromatic Exit Device 1690/1790 Push Bar Pin PB322
Dor-o-Matic 1690 and 1790 Pushbar Pin
Doromatic part # PIN.128 or PB322
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB322 -
Doromatic Exit Device 1690/1790/1990/2090 Pinion PB5-PB140-CAM.102
Doromatic replacement pinion gear. This gear is what the key cylinder fits into to actuate the exit device Doromatic Part # CAM.102 and also PB5G199005 -
Doromatic Exit Device 1690/1790 Lock Stile Push Bar End Cap PB318
Dor-o-Matic Lock stile Push Bar End Cap
Doromatic part # ECAP.129 or PB318
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB318 -
Doromatic Exit Device 1990/2090 Dog Screw
Dor-o-Matic 990/1090/199092090 dogging screw. This is the screw that holds down the cross bar when you tighten it. The thread is 7/16-14.
Doromatic part # SCREW.1022
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199014 -
Doromatic Exit Device 1690/1790/2390 Dogging Spring PB323
Dor-o-Matic 1690, 1790 and 2390 Dogging Spring
Doromatic part # 971493-76 or PB323
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownGPB323 -
Doromatic 1590 Latch Bolt Assembly
Doromatic 1590 Latch Bolt Assembly
Replacement Latch Bolt Assembly for the Falcon Doromatic 1590. In the old days you could just replace the PB355 (SPRING.127) spring, but as of November 2015 you have to replace the complete latch head assembly.
Doromatic Part # 4270107603
GPB124 -
Doromatic Exit Device 1990/2090 "E" Ring - 7/16 Inch Diameter
Dor-o-matic 1990/2090 Pivot Pin E Ring. This ring is used on the Pivot Pin G199013.
7/16" diameter
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199044 -
Doromatic 1390 Dogging Assembly
Dor-o-Matic 1390 Dogging Assembly. If you have a 1390 and the dogging is stripped, this is the part you need. The 1390 was discontinued in about 2003. The kit includes the dogging cam, activating cam, spacer and retaining ring.
Doromatic part # 4270106669 or PB96 or PB-96
G4270106669 -
Doromatic Exit Device Part 1990/2090 Crossbar Screw 1/4- 20 X 1"
Dor-o-Matic 990/1090/1990/2090 Cross Bar Screw
Doromatic part # SCREW.1027
1/4-20 x 1" Self Tapping Threads
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199012 -
Doromatic Exit Device 1990/2090 Arm Bearing
Dor-o-Matic 1990 and 2090 arm bushing. This bushing goes between the pivot pin (arm axle) and housing.
Doromatic part # BUSH.103 or PB43
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199043 -
Doromatic Exit Device 1690/1790 End Cap Bracket Screw PB315
Dor-o-matic 1690 and 1790 End Cap Bracket Screw. This screws holds the bracket that holds the end cap.
Doromatic part # SCREW.1070 or PB315
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB315 -
Doromatic Exit Device 2090 Lever Arm
Doromatic Exit Device 2090 Lever Arm
Right hand dark brown shown in picture
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209020 -
Falcon Mechanical Electric Latch (MEL) Retrofit Kit 47867200
New for 2024 the Falcon MEL 47867200 Mechanical Latch Retraction. Retrofits all 1690, 1790, 24 and 25 Series devices to Mechanical Latch Retraction. This new system uses the PS902 Power Supply. The benefits for the MEL Series over the Older EL series are lower power draw (1 amp verse 16 amp), and more flexible power supply location, longer wire runs and thinner guage wires.
G47867200 -
Doromatic PB48 Strike Shim Package
Doromatic PB48 Strike Shim Package Of 10 Pieces
This Dor-o-Matic product is for the PB48 Top Strike. This is the shim that goes under the top strike. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. They are only sold in packages of 10.
Doromatic Part # SHIM.112
G199034-SHIM -
Doromatic Exit Device 1690/1990 Top Strike PB48
Dor-o-Matic top strike.
Used on the Dor-o-Matic 1490, 1690, 1990 and 2390 Concealed Vertical Rod Exit and Panic Devices. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. The diameter of the pin is 7/16" and projects out 5/32". Ships with mounting screws and 3 shim plates.
Doromatic part # PB48
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199034 -
Doromatic Exit Device 1990/2090 Lever Arm
Dor-o-Matic Lever arm.
Doromatic part # DC15 Lh and DC40 Rh
Order G199015 for Left Hand and G199040 for Right Hand
Left hand lever shown for 1990 and the 2090 inactive case.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199015- -
Doromatic Exit Device 2090 Active Case
Doromatic Complete 2090 and 1090 Active Case. Includes all of the interior hardware. Just unscrew or loosen the three set screws and remove your old case and install and tighten the three set screws. Housing measures 7-1/2" long by 1-3/16" wide.
4270902740 Left Hand Aluminum Stock
4270902742 Left Hand Dark Brown Stock
4270902743 Left Hand Black * One week lead time
4270902746 Right Hand Aluminum Stock
4270902748 Right Hand Dark Brown Stock
4270902749 Right Hand Black * One week lead timeG209001