Search results for: 'super stainless steel bracket for detex'
-
Stamped SS Two Ear Bracket For 1" Panel, 1-1/2" X 2-1/2"L
Toilet Partition Two Ear Wall Bracket For 1" Thick Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 3-11/16" with the mounting screws are 2-15/16" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and Two Wing Bracket. Manufacturer part # 1759.
Shipped with screws
9A1759 -
Cast SS Two Ear Bracket For 3/4" Panel, 1-1/2" X 2-1/2"L
Toilet Partition Two Ear Wall Bracket For 3/4" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 3" with 2-7/32" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall Two Ear Wall Bracket, or Two Ear 3/4". Manufacture part # 1623
Shipped with mounting screws.
9A1623 -
Cast SS U Bracket 1" Panel, 1-1/2" X 1-3/8" L
Toilet Partition U Bracket For 1" Thick Panel Cast Stainless Steel
Cast stainless steel construction. Bracket base is 1-3/8" x 1-1/4" with two mounting screw holes. Bracket legs project out 1-3/8" with the thru hole at 1" on center from the bottom of the base. Also known as a Bathroom Partition Stall U-Bracket or Wall Bracket 1". Manufacture part number 1913
Shipped with mounting screws
/p>9A1913 -
Stamped SS Two Ear Bracket For 3/4" Panel, 1-1/2" X 2-1/2"
Toilet Partition Two Ear Wall Bracket For 3/4" Thick Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 3-13/32" with the mounting screws are 2-21/32" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and Two Wing Bracket. Manufacturer part # 1629.
Shipped with screws
9A1629 -
Stamped SS Continuous One Ear Bracket 1" x 2-1/2" X 57"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel x 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-1/2" x 57" long. Mounting holes are 1-15/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2339.
9A2339 -
Stamped SS Continuous Two Ear Bracket 1 X 2-1/2 X 57
Toilet Partition Continuous Two Ear Wall Bracket For 1" Panel X 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 3-11/16" x 57" long. Mounting holes are 2-15/16" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 14" or so. Also known as a Bathroom Stall Two Ear or Two Wing Wall Bracket. Manufacturer part # 2349.
9A2349 -
Stamped SS Continuous Two Ear Bracket 1" X 2-1/2" X 41"
Toilet Partition Continuous Two Ear Wall Bracket Forl 1" Panel X 41" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 3-11/16" x 41" long. Mounting holes are 2-15/16" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall Two Ear or Two Wing Wall Bracket. Manufacturer part # 2609.
9A2609 -
Stamped SS Continuous 'U' Bracket 1 x 1-3/8 X 57
Toilet Partition Continuous 'U' Wall Bracket For 1" Thick Panel 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 1-1/8" x 57" long. Legs project out 1-1/2" with the thru hole at 1-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall Continuous U Wall Bracket. Manufacturer part # 2369.
Screws included with bracket.
9A2369 -
Stamped SS Two Ear Bracket 7/8" Panel, 1-1/2" X 2-1/2"
Toilet Partition Two Ear Wall Bracket For 7/8" Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 3-13/16" with the mounting screws are 2-13/16" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and Two Wing Bracket. Manufacturer part # 1639.
Shipped with screws
9A1639 -
Cast SS Angle Bracket 1-3/4" x 1-3/4"
Toilet Partition Stainless Steel Angle Bracket 1 3/4" X 1 3/4". Constructed of cast stainless steel die casting. Base is 1-3/4" x 1-3/8", projects out 1-3/4". Two screw holes are 1/4" diameter and are located 1-1/4" from opposing face. Sometimes called Bathroom Stall Angle Bracket. Sold individually, and shipped with required screws. Manufacture part number 2013.
9A2013 -
Stamped SS Continuous One Ear Bracket 1-1/4 x 2-1/2 x 57
Toilet Partition Continuous One Ear Wall Bracket For 1-1/4" Panel x 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-11/16" x 57" long. Mounting holes are 1-19/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 14" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2359.
9A2359 -
Stamped SS One Ear Bracket 1-1/4" Panel, 1-1/2" X 2-1/2" L
Toilet Partition One Ear Wall Bracket For 1-1/4" Panel, Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 2-13/32" with the mounting screws are 1-15/32" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and One Wing Bracket. Manufacturer part # 1849.
Shipped with screws
9A1849 -
Stamped SS 'U' Bracket 3/4 Panel, 1-1/2 X 1-1/2 L
Toilet Partition "U" Wall Bracket For 3/4" Thick Panel Stamped Stainless Steel. 14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 15/16" . Leg project out 1-1/2" with the thru hole at 1-1/8" from the base. The 4 thru holes are 1/4" diameter, two of them are the mounting holes. Also known as a Bathroom Stall U Wall Bracket. Manufacturer part # 1899. Shipped with screws.
9A1899 -
Stamped SS One Ear Bracket 7/8" Panel 1-1/2" X 2-1/2"
Toilet Partition One Ear Bracket For 7/8" Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 2-5/16" with the mounting screws are 1-13/32" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and One Wing Bracket. Manufacturer part # 1659.
Shipped with screws
9A1659 -
Cast SS Two Ear Urinal Bracket 1" X 1-1/2" X 2-1/2"
Toilet Partition Two Ear Urinal Wall Bracket For 1" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" centers on the mounting holes. The bracket legs project out 2-1/2" with the thru hole at 2-1/8" from the back of the base. Walls are 1/8" thick. Also know as a Bathroom Stall Partition Urinal Screen Bracket - Two Ear 1". Manufacture part # 1613.
Ships with mounting screws.
9A1613 -
Stamped SS Continuous Two Ear Bracket 1" X 2-1/2" X 54"
Toilet Partition Continuous Two Ear Wall Bracket For 1" Panel X 54" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 3-11/16" x 54" long. Mounting holes are 2-15/16" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall Two Ear or Two Wing Wall Bracket. Manufacturer part # 2869.
9A2869 -
Stamped SS Continuous One Ear Bracket 1" x 2-1/2" X 54"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel x 54" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-1/2" x 54" long. Mounting holes are 1-15/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2879.
9A2879 -
Stamped SS U Bracket 7/8" Panel, 1-1/2" X 1-1/2" L
Toilet Partition "U" Wall Bracket For 7/8" Thick Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 1-1/8". Leg project out 1-1/2" with the thru hole at 1-1/8" from the base. The 4 thru holes are 1/4" diameter, two of them are the mounting holes. Also known as a Bathroom Stall U Wall Bracket. Manufacturer part # 1909.
Shipped with screws
9A1999 -
Cast SS One Ear Bracket 3/4" Panel, 1-1/2" X 2-1/2"
Toilet Partition One Ear Wall Bracket For 3/4" Panel Cast Stainless Steel
Cast stainless steel construction. Base of the bracket is 2" x 1-1/2", with 1-1/8" hole spacing. Bracket legs project out 2-1/2" with the screws at 2-1/8" on center from the base. The four holes are 1/4" diameter. Also known as a Bathroom Stall One Ear Wall Bracket or One Ear 3/4". Manufacture part # 1643.
Shipped with mounting screws.
9A1643 -
Stamped SS Continuous One Ear Bracket 3/4"X2-1/2"X57"
Toilet Partition Continuous One Ear Wall Bracket For 3/4" Panel x 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-1/2" x 57" long. Mounting holes are 1-15/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2079.
9A2079 -
Cast SS One Ear Bracket For 7/8" Panel, 1-1/2" X 2-1/2"
Toilet Partition One Ear Wall Bracket For 7/8" Panel Cast Stainless Steel
Cast stainless steel construction. Base of the bracket is 2" x 1-1/2", with 1-1/8" hole spacing. Bracket legs project out 2-1/2" with the screws at 2-1/8" on center from the base. The four holes are 1/4" diameter. Also known as a Bathroom Stall One Ear Wall Bracket or One Ear 7/8". Manufacture part # 1653.
Shipped with mounting screws.
9A1653 -
Stamped SS U Bracket 1-1/4" Panel, 1-1/2" X 1-1/2" L
Toilet Partition "U" Wall Bracket For 1-1/4" Thick Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 1-13/32" . Leg project out 1-1/2" with the thru hole at 1-1/8" from the base. The 4 thru holes are 1/4" diameter, two of them are the mounting holes. Also known as a Bathroom Stall U Wall Bracket. Manufacturer part # 1949.
Shipped with screws
9A1949 -
Stamped SS Continuous Two Ear Bracket 1/2" X 2-1/2" X 57"
Toilet Partition Continuous Two Ear Wall Bracket For 1/2" Panel X 57" Long Stamped Stainless Steel. 18 gauge (.05" thick) stamped stainless steel construction. Base is 3-11/16" x 57" long. Mounting holes are 2-15/16" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 14" or so. Also known as a Bathroom Stall Two Ear or Two Wing Wall Bracket. Manufacturer part # 2679.
9A2679 -
Cast SS Two Ear Bracket 1 1/4" Panel, 1-1/2" X 2-1/2"L
Toilet Partition Two Ear Wall Bracket For 1 1/4" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall Two Ear Wall Bracket, or Two Ear 1". Manufacture part # 1833
Shipped with mounting screws.
9A1833 -
Cast SS Two Ear Urinal Screen Bracket For 1" Panel 1-1/2" x 3-1/2
Toilet Partition Two Ear X- Long Urinal Wall Bracket For 1" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" centers on the mounting holes. The bracket legs project out 3-1/2" with the thru hole at 3-1/8" from the back of the base. Walls are 1/8" thick. Also know as a Bathroom Stall Partition Urinal Screen Bracket - Two Ear Extra Long 1". Manufacture part # 1283.
Ships with mounting screws.
9A1283 -
Cast SS One Ear Bracket 1 1/4" Panel, 1-1/2" X 2-1/2"L
Toilet Partition One Ear Wall Bracket For 1-1/4" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 2-3/4" with 1-1/2" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall One Ear Wall Bracket, or One Ear 1-1/4". Manufacture part # 1843
Shipped with mounting screws.
9A1843 -
Cast SS Two Ear Bracket 1" Panel 1-1/2" X 2-1/2"
Cast SS Two Ear Bracket 1" Panel 1-1/2" X 2-1/2"
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall Two Ear Wall Bracket, or Two Ear 1". Manufacture part # 1753
Shipped with mounting screws.
9A1753 -
Door Stop Pilaster Mounted Polished Stainless Steel
Door Stop, Pilaster Mounted, 2-1/2" X 4-1/4", Door Stop Pilaster Mounted Polished Stainless Steel
Polished Stainless Steel Construction. The door stop base is 3" wide by 1-1/4" high with a 2-5/16" hole spacing. The stop projects out 2-1/2" and has a rubber insert in it. This door stop is usually mounted on the pilaster or post. Also known as a Bathroom Stall Door Stop. Manufacture part # 4155.
9A4151 -
Stamped SS 'U' Bracket 1" Panel, 1-1/2" X 1-1/2" L
Toilet Partition 'U' Wall Bracket For 1" Thick Panel Stamped Stainless Steel
14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 1-13/16" . Leg project out 1-1/2" with the thru hole at 1-1/8" from the base. The 4 thrue holes are 1/4" diameter, two of them are the mounting holes. Also known as a Bathroom Stall U Wall Bracket. Manufacturer part # 1919.
Shipped with screws
9A1919 -
Stamped SS Continuous Two Ear Bracket 3/4"X2-1/2"X57"
Toilet Partition Continuous Two Ear Wall Bracket For 3/4" Panel X 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 3-11/16" x 57" long. Mounting holes are 2-15/16" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 14" or so. Also known as a Bathroom Stall Two Ear or Two Wing Wall Bracket. Manufacturer part # 2089.
9A2089 -
Stamped SS Continuous 'U' Bracket 1/2" x 1-3/8" X 57"
Stamped SS Continuous 'U' Bracket 1/2" x 1-3/8" X 57". 18 gauge (.05" thick) stamped stainless steel construction. Base is 1-1/8" x 57" long. Legs project out 1-1/2" with the thru hole at 1-1/8" from the base. Mounting and thru bolts every 13" or so. Manufacturer part # 2669. Screws included with bracket.
9A2669 -
Stainless Steel Continuous Hinge W/ Out Spring, 57-1/2
Toilet Partition Continuous Hinge Without Spring, 57-1/2 Long Stainless Steel
16 gauge (.060" thick) stainless steel construction. 3" wide when laid flat x 57-1/2" long with holes every 11" or so. 1/8" diameter hinge pin. Hinge can be raised up 3/8" for emergency entry. Also known as a Bathroom Stall Piano Hinge, or Full Length Stainless Steel Continuous Piano Hinge. Manufacture part # 7649.
Shipped with all the fastners
9A70C3
