Search results for: 'fitting roller door horn'
-
Road Roller Matting
VINYL BACK COCOA MAT ROAD ROLLERS
Road roller mats are made with fibers from the almost indestructible outer husk of the coconut. These fibers are bonded into a vinyl backing. These vinyl back Road Roller Mats can be installed much easier than woven mats and can be easily cut to fit without the mat unraveling. If small holes are needed for installation, a sharp knife or punch will easily do the job.
Rollers are 32' 9" long and around 1-3/16" thick
RRXR -
Koroseal Vinyl Lap Type Nosing No. 105
Ribbed Koroseal Vinyl lap-type nosing for front edge of stages, bowling lane steps, platform-like floors and bar foot rests. Form fitting adjusta-nose; has a 7/8” lip to allow 1/8” flooring to lap over back edge. Standard 8’ lengths. Install with #400 Neoprene Contact Cement or #300 Water-based Contact Adhesive.
SPECIFICATIONS:
Furnish and install No.105 Service Weight Koroseal Vinyl Ribbed Lap-Type Nosing; 2-3/4” deep; 1-1/2” nose depth; square adjusta-nose. Lap 1/8” flooring over the back lip to butt against ribbed design. Select from standard colors of black or brown.
Shipping: Due to shipping costs, this product is shipped in two 48" sections105 -
300 Series Vinyl Stair Treads
Description
This is a very good stair tread, but not one of our favorites. The nose on this vinyl stair tread is difficult to work with in some applications. Because the nose has substantial material (thickness) it is tricky to work with. We can send you a sample, so you can see how it fits on your step. It is our lowest cost protection for stairs of homes, duplexes and apartments. Features extra heavy snap-on nose that fits either square or curved nose wood steps that are between 3/4" and 1-1/8" thick. Made in the USA.
SPECIFICATIONS:
- Koroseal vinyl rib design stair treads
- Thickness: 1/8"
- Depth: 9-5/8"
- Snap on nose
- Sizes available: 18", 24", 30", 36", 42", 48" or 72"
- Colors available: Brown, Black
VST300 -
334 Vinyl Stair Tread 24" Brown
334 Vinyl Stair Tread 24" Brown
Lightweight, economy gauge with a round rib design. Wear and tear resistant Vinyl Stair Treads will give years of service; compares with heavier weight treads. Curve-around nose fits round or square nose steps. Intended for residential or light commercial use.
SPECIFICATIONS:
#334 Koroseal Vinyl economy stair treads, round rib surface design, approximately 5/64" thick, 10" deep with curve-around nose;
334BRN24SP -
334 Vinyl Stair Treads
Ideal for residential and light commercial applications. This is one of our favorite stair treads for the do-it-yourselfers. Easy to install with very easy cutting, ideal for basement steps. Lightweight, economy gauge with a round rib design. Curve-around nose fits round or square nose steps. Made in the USA.
Specifications:
- #334 Koroseal Vinyl economy stair treads
- Round rib surface design
- Thickness: 5/64"
- Depth: 10"
- Curve-around nose
- Sizes available: 18", 24", 36", 48" or 72"
- Colors available: Brown, Black
VST334 -
920R One-Piece Tread and Riser
The 920R One-Piece Rubber Stair Tread has a 3/16" thick nose and tapers to 5-16" at the back. The nose is adjustable and tapered for a perfect fit. The benefit of a one piece tread is the ease of cleanng, there is not a groove at the back of the step to collect debris. They are designed for interior use.
920R -
GS920R One-Piece Tread and Riser with Grit Stripping
The GS920R One-Piece Rubber Stair Tread has a 3/16" thick nose and tapers to 5-16" at the back. The nose is adjustable and tapered for a perfect fit. The benefit of a one piece tread is the ease of cleanng, there is not a groove at the back of the step to collect debris. You have two choices on the Grit Stripping, the Visual Impaired 1-2" wide or 2-3/4" wide grit tape strips. They are designed for interior use.
GS920R -
LT-1212 Linear Tile
Interlocking 1/2" x 11-7/8” x 11-7/8” recycled PVC tiles with bristle carpet inserts. Brushes off sand, dirt and slush from shoes and cart wheels; open grid drains away water and debris. Modular 11-7/8” x 11-7/8” tiles allow flexibility and the ability to fit the product to any size area. Tiles snap together easily to install and replace. Beveled ramp edges are available for non-recessed applications.
This product is part of our sustainable development program where the tiles can be returned at the end of the lifecycle for a credit toward replacement product. The material is then cleaned, ground, treated for contaminants in an environmentally safe process, and re-formed into new matting. Check with our customer service department for details.
Sold in cartons of 24 tiles, 23.36 sq feet
LT-1212 -
Vinyl Backed Cocoa Mats 19 mm Thick
VINYL BACKED COCOA MATS
Vinyl-Back Cocoa Mats in Natural Golden Tan color provides safe leak proof brush action cleaning. All natural fibers from the outer husk of the coconut are fused into a vinyl backing by a unique process to create an extremely long wearing and efficient shoe cleaning surface. The vinyl-back allows trimming to fit any size or shape entrance; is skid proof, lays flat, stays in place. Tan color is colorfast. Ideal for use in recesses; cropped bristles give excellent scraping action.These mats clean grit and moisture from shoes, dry rapidly; won't mildew or rot. Mats do not generate static electricity. Mats can be easily vacuumed or washed with mild soap. Available in 15 mm (.59 inches), 19 mm (.748 inches) or 30 mm (1.18 inches) thick.
Pricing shown below is for the 19 mm thick mats. Also available in 15 mm and 30 mm thicknessCustom sizes are available, call or email for pricing
COCOA -
Vinyl Backed Cocoa Mats 15 mm Thick
VINYL BACKED COCOA MATS
Vinyl-Back Cocoa Mats in Natural Golden Tan color provides safe leak proof brush action cleaning. All natural fibers from the outer husk of the coconut are fused into a vinyl backing by a unique process to create an extremely long wearing and efficient shoe cleaning surface. The vinyl-back allows trimming to fit any size or shape entrance; is skid proof, lays flat, stays in place. Tan color is colorfast. Ideal for use in recesses; cropped bristles give excellent scraping action.These mats clean grit and moisture from shoes, dry rapidly; won't mildew or rot. Mats do not generate static electricity. Mats can be easily vacuumed or washed with mild soap. Available in 15 mm (.59 inches), 19 mm (.748 inches) or 30 mm (1.18 inches) thick.
Pricing shown below is for the 15 mm thick mats. Also available in 19 mm and 30 mm thicknessCustom size available, call or email for pricing
COCOA-15- -
400 Series Vinyl Stair Treads
400 Vinyl Stair Treads
Heavy gauge sharp-rib design Koroseal vinyl treads for heaviest traffic; 1/4" thick at wear area, easily trimmed to cover and fit any stair step. Install over concrete, metal, wood, terrazzo. Extra heavy thickness at the front "wear area". Meets Fed. Specs. RR-T-650E Type B. They are designed for interior use.
SPECIFICATIONS:
No. 400 Koroseal vinyl rib design stair treads 1/4" thick 12" deep; 1-1/4" square nose; contains no asbestos fiber; made of first quality homogeneous vinyl, color throughout thickness; free from imperfections which might lesson serviceability. Select standard length of 24", 30", 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid colors of Brown, Sand, Gray or Black.
VST400 -
DR-CT Diagonal Rib Carpet Tiles
DR-CT DIAGONAL RIB CARPET TILES
An attractive and functional entrance matting alternative; heavy duty modular carpet tile with excellent scraping and dirt removal properties for high traffic areas. Designed for interior use in entrances, vestibules, lobbies, between double doors, on ramps or in elevators.Install in a recess or on the surface. Our easy release adhesive allows you to remove worn or damaged tile which is easily re-adhered. Tile can be switched to decrease traffic patterns; lasts longer, looks better. Vinyl or Aluminum beveled edging available.
3/8" thick; 19-11/16" x 19-11/16" square tile; diagonal rib pattern woven of 100% polypropylene pile yarn with a bitumen backing.
SPECIFICATIONS--No. DR-CT
DR-CT Diagonal Rib Carpet Tiles made of 100% polypropylene pile yarn with a bitumen backing in areas as indicated on drawings. Tile shall be of first quality commercial grade carpet, free of surface defects. Install tile in an alternating rib parquet pattern in indicated recess with recommended easy release adhesive, (or on surface area using vinyl edging or aluminum beveled frame). Tile shall be 3/8" thick, 19-11/16" x 19-11/16" square carpet tile. Select from standard carpet colors of Cranberry, Blue, Beige, Teal, Gray, Chocolate or Charcoal.
one DR-CT Diagonal Rib Carpet Tile covers 2.69 square feet
DR-CT