Search results for: 'case latches trai tube acrylic slide top'
-
Metpar Top Hinge 1-1/4 Sq Edge
Metpar Partition Top Hinge For 1-1/4" Square Edge Post Or Pilaster
Chrome plated Zamac die cast construction. The outside dimensions of the U mounting channel are 1-1/4" deep by 2-1/4" high by 1-3/8" depth with a hole spacing of 1-1/2". The hinge lug projects out 1-1/2" by 1/2" thick with a bushing diameter of 3/8". Also known as a Metpar Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3930.
Shipped with mounting screws.
A=1-9/16"
9CP400 -
ASI Visual Display 9800 4' x 6' Dry Erase Oak Frame
Pro-Rite® Markerboards
BEST QUALITY!PR-Series boards available with 1" maprail at no extra charge. Magnetic porcelain steel surface available in white or black. Trim and full-length shelf tray available in satin anodized aluminum or solid oak.
Marsh Advantage
Marker packet sent with each markerboard. Installation hardware sent with board. M-Class Packaging System offers the best protection in the industry during shipping. Custom Pro-Rite® sizes available, call with specifications.
WR-406O -
International Door Closer 851 Series
International Door Closer 851 Series
FEATURES
Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation. Ships with regular and parallel arm bracket3/4" x 6-3/8" mounting holes
851- -
International Door Closer 852 Series
International Door Closer 852 Series
FEATURESTwo Adjustment Valves: Closing and Latching
speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation. Shipped with regular and parallel arm bracket.3/4" x 7-3/8" mounting holes
852- -
Doromatic Exit Device 2090 Latch Link
Dor-o-matic 2090 latch link
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209040 -
-
Generic 8 inch Top Hinge Repair Kit, Plastic Rod
Fits most manufactures like Global, Hadrian, Accurate Toilet Partitions. Also known as a Bathroom Stall 8" Top Repair Kit. These might not fit exactly. Shave off two sides to make smaller. The configuration is the same for all manufactures, some just a little wider in the diameter.
Manufacture part # 8465
9HHGB-TOP -
Round Tubing 5/8 inch O.D. X 1/2 inch I.D. Spring Clip
Threaded spring clip for round legs. 1/4-20 thread for use with our LA10625 and SLA12525. 5/8" outside diameter, 1/2" inside diameter with a 1/4-20 thread. This clip has an outside holding clip.
CLR62N -
Accurate Top and Bottom Hinge
Accurate Partitions Top and Bottom Hinge for 1-1/4" Round Post
chrome plated
used on Accurate Metal Partitions for mounting on a 1-1/4" thick round edge pilaster.
Accurate part number 50-8517300 and 50-2517200 and 50-398660. Security screws included.
A= 1-1/2", Used prior to January 1st 2013. There is no exact replacement hinge that will work.
**Not Available anymore, see link for new doors
9HAH15 -
Adams Rite 8600 Electric Latch Retraction Concealed Vertical Rod
The Adams Rite 8600EL Electric latch Retraction Concealed Vertical Rod is designed for narrow stile aluminum framed glass doors. The device will fit on stile widths of 2" or more. The EL version We recommend this device for replacement or upgrading your current 8600 to Latch Retraction, modifying your existing door to this exit device will be labor intensive. The 8611EL would be for the aluminum finish and the 8622EL would be or the dark bronze finish.
This device is Electrified, please see the 8600 for the non Electric Device.
8600EL -
Corbin Russwin ED4200S Latch Assembly
Corbin Russwin ED4200S Latch Assembly
The Corbin Russwin ED4200S 681F618 Latch Assembly is used on the Narrow Stile SecureBolt Exit Device. The difference between the ED5200S and ED4200S Latch Assembly is the location of the Hub. Hub on the ED4200S Latch Assembly is located on the center line of the Assembly Mounting Screws.
Corbin Russwin Part # 651F618
The Hub Position on this Latch is the ED4200
G681F618 -
Sanymetal Keeper Bumper For Concealed Latches Inswing/Outswing
Sanymetal Partitions Keeper Bumper And Strike For Concealed Latches Inswing/Outswing 1-1/4"
Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a1/2" thick and the slot is 7/16" deep. The opening to mount it on the pilaster or post is 1-1/4" by 1-1/4" This Strike and Keeper are for square post or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5960
Shipped with screws for mounting.
9S8861 -
General Latch Knob & Cover
General Partition Concealed Latch Knob & Cover
Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 1390, 6140.
92000C -
Falcon Mechanical Electric Latch (MEL) Retrofit Kit 47867200
New for 2024 the Falcon MEL 47867200 Mechanical Latch Retraction. Retrofits all 1690, 1790, 24 and 25 Series devices to Mechanical Latch Retraction. This new system uses the PS902 Power Supply. The benefits for the MEL Series over the Older EL series are lower power draw (1 amp verse 16 amp), and more flexible power supply location, longer wire runs and thinner guage wires.
G47867200 -
Full Length Door Stop for 1" Material
Full length aluminum door stop for 1" material used with solid plastic commercial toilet partitions or posts that are 1" thick. This product will help any gap from the front view of the toilet stall door on the latch side. For an out swing door the slide bolt latch locks onto the opposite side of the bumper. For an in swing door the kit comes with a simple stainless steel keeper that is mounted on the inside of the stall on the post for the latch to lock to. This kit is used for an inswing or an outswing door. The spec sheet is attached, the overall height is 53-1/2". The product is made by Global Partitions with part numbers 40-8464400 and 40-8262370.
9A8464400 -
Flush Metal Ada Latch Knob Cover
Flush Metal Partition Concealed Ada Latch Knob Cover Chrome Plated
Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". The ADA Barrier Free Lever is 2-9/16" long when measured from the all the way across the cover. The cover has an overall depth of 1-1/4". Also known as a Bathroom Stall Concealed ADA Latch Cover and Knob Assembly. Manufacture part # 6150
9FL325A -
Von Duprin 3327A Exit Device Only
Von Duprin 3327A Exit Device Only
3327A and 3527A for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 3527A has a smooth mechanism case and the 3327A has grooved case. 3327A/3527A fits door stiles as narrow as 1-3/4". Newly designed device has a one piece center case cover.
3327AEO -
General Top Hinge For 1-1/4" Round Edge Post
General Top Hinge For 1-1/4" Round Edge Post
Chrome plated Zamac die cast construction. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 3/8" diameter. Also known as a Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3510.
Shipped with mounting screws.
A=1-7/6"
91500B -
Magnuson DSFH Series Rak
These floor racks bring function and flexibility to situations requiring high capacity garment storage.
Offered in single faced versions, in hook and hanger styles and in lengths of 3, 4, and 5 feet; they are the perfect solution to a wide variety of public area coat storage applications.
Hanger style features 1" diameter chrome tube that accepts open hook, closed loop, ball or T-top hangers with receptacle (sold separately). Hook style includes charcoal gray K-73 vinyl coated steel triple prong hooks. Racks available in powder coated steel finishes of Medium Gray, Sandstone, and Black.
MG-DSF-xx
