Search results for: 'bleacher rack based 60 1 hussei gearbox reduce'

Universal Bleacher Center Skirt board bracket for left hand.

Brunswick Bleacher Type A Rivet.

Horn bleacher lower rod bracket.

Brunswick Bleacher Spring Left Handed, Right hand shown in picture.

Interkal Bleacher Regular Row Lock Right Hand. Also known as 133682.

7/8" diameter Nylon based Nail On furniture glide. Protect hardwood, ceramic tile, linoleum & hard surfaces from mars & scratches by using this nail on glide.

Interkal Bleacher Hardware for row locks. Also known as 133687.

Interkal Bleacher Hinge for Left hand. Also known as 133034.

Brunswick Bleacher Spring Left Handed. Note Left hand shown in picture.

Interkal Bleacher Hinge. Also known as 174520.

Metal Swivel Chair Glide for a chair leg with a  3/4" O.D. X 5/8" I.D. This Swivel base chair glide features a Ferrule and Nylon Base. The base of this chair glide is 1 1/4" in diameter. Metal base glides are very popular in schools and institutions and move easily across smooth or carpeted floors.  Metal base glides are nickel plated and are extremely durable, but when they do wear out, they will scratch the floor.  The glide freely swivels beyond 30 degree angle. Glide grips leg with outside holding clip, meaning it grabs the out side of the leg, see more views for picture of outside holding clip. 

Universal Bleacher Nylon Accu-Roll Wheel & Pin 3/8"ht x 2" dia, comes with pin P2074U.

Medart Bleacher Latch Bracket Left Hand. 2" Hole Spacing.

Yale 7200 Latch Assembly, used on the Narrow Stile Exit Device.

Yale Part # 60-7200-0354-048

Note the position of the hub on this latch is the 7200

Horn Bleacher Spring, Left hand shown in picture.

Non swivel glides for round tubing

5/8" outside diameter
7/16", 1/2" and 9/16 inside diameter
1-1/16" base diameter
Nickel plated metal base

Universal Bleacher first row lock cable.

Universal Bleacher 1st row pulley bracket.

Brunswick Bleacher Spring Right Handed. Note Left hand shown in picture.

Medart Bleacher Top Frame Cantiliver Guide, 5" width

7/8" Nail On Glide-Nickel Base

Nail on furniture glide, 7/8" diameter metal base

Medart Bleacher Latch Bracket Right Hand. 2" Hole Spacing.

Republic Steel 60" st Lock Bar -47-7/8" Length, Latch finger 701730 included, uses 700308-700309 handle assembly. Also known as 7134360, 75160, 2860, 70060, rs6048, lr160.

Heavy Duty Non-Swivel Leveler for chairs and tables.   Has a thread of 5/16-18, base diameter of 1 3/4" and a stem length of 1 1/2". This heavy duty glide screws into a threaded hole in the leg or table to selected height. Use with a Tnut to install on a wooden leg. 

Metal Based Chair Swivel Glide with a chair leg measurement of 7/8" O.D. X 3/4" I.D. This glide features a Nylon Base. Nylon base swivel glides are for round tubing. Metal base glides are very popular in schools and institutions and move easily across smooth or carpeted floors.  Metal base glides are nickel plated and are extremely durable, but when they do wear out, they will scratch the floor.  The glide freely swivels beyond 30 degree angle. Glide grips leg with outside holding clip, meaning it grabs the outside of the leg, see more views for picture of outside holding clip. 1 1/4" base diameter. 

Metail Swivel Chair Glide for a chair leg with a 3/4" O.D. X 9/16" I.D.  This chair glide has a Ferrule and Nylon Base. The nylon base is 1 1/4" in diameter. This glide is made for American Seating and Griggs. This Nylon Base Swivel glide has an internal holding clip. Chair glides are very popular in schools and institutions and move easily across smooth or carpeted floors.  Metal base glides are nickel plated and are extremely durable, but when they do wear out, they will scratch the floor.  The glide freely swivels beyond 30 degree angle. Glide grips leg with outside holding clip, meaning it grabs the out side of the leg, see more views for picture of outside holding clip. 

Universal Bleacher Center Skirt board bracket for right hand.

Wayne Bleacher Lower Wheel Channel Keeper 2" x 2".

Horn Bleachers Vertical Push Rod Spring, Push rod spring only.

The Von Duprin 090039 is used in the push bar assembly to return the latch. It is known as the Base Plate Latch Return Spring or Latch Return Spring. It is used on the 22, 33A, 35A, 98 and 99 Devices. The spring is 2-1/4 inch long with a 3/8 inch diameter.

Medart Bleacher Metal Roller w/axle bolt-nut.

Medart Bleacher Front Row hinge bracket 12" width.

Wayne Bleacher Arm Bushing 27/32" X 3/4"dia.

Medart Bleacher Rear Shoulder Pin 3/4", for front row truck assembly.

The Swivel Glide 5/8" O.D. with Ferrule Outside Holding Clip Nylon Base is used on American Desk, Artco Bell, Carter Craft, Krueger, Peabody and Virco Chairs. Nylon or Plastic Base Glides slide easily across floors as long as the floor is free of grit and grime.  When you do have grit or grime on the floor, it gets impregnated in the nylon and will scratch the floor.  The top freely swivels beyond 30 degree angle. Glide grips leg with outside holding clip, meaning it grabs and holds on to the outside of the leg, see more views for picture of outside holding clip.  This glide is designed for 5/8" outside diameter legs, and the base is 1-1/4" in diameter.