Search results for: 'bleacher rack based 60 1 hussei gearbox reduce'

International Door Closer 5000 Series

1. ADA (Handicap) multi-sized closer with adjustable spring power
2. Adjustable spring power 8 1/2 lbs to Size 5; Adjustable after installation
3. Rack and pinion mechanism is contained in a high tensile precision cast aluminum housing
4. Finishes available in Aluminum (AL), Hardware Bronze - Storefront Bronze (DU)

Ships with regular arm and parallel arm bracket

Hole spacing 3/4" x 12"

Brunswick Bleacher Type B Top Rivet for push rod.

Interkal Bleacher Regular Row Lock Left Hand. Also known as 133683.

Interkal Bleacher 1st Row Lock Right Hand. Also known as 133686.

Interkal Bleacher 1st Row Lock Left Hand. Also known as 133687.

Brunswick Bleacher Floor Pad 3/4" X 2" dia. Note hole 3/16", outer 7/16"x1/4" depth

Snapglide felt caps to fit over 1 1/4" diameter glides. White in color. Attach to your glides to protect your floors from being scratched. Also reduces noise when students move their chairs around. 

Bleacher Locks keyed different only.

Felt Pads 3/4" Diameter for a Chair Leg to prevent scratching and reduce noise.  Self adhesive so it installs in seconds. 3/16" thick. 

Lyon Metal Locker single tier lock bar, 56-1/2" in length. Used Feb 1980 - Sept 1981.
3 Wire Springs included. Also known as 6775.

Bleacher 1st row riser board holding arm assembly for wood bleachers.

7/8" Q-Ball Floor Protector with Felt Base for use on 7/8" outside diameter chair and table legs.The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic. Kit includes: Adaptor for 7/8" Leg, and Q-Ball with Felt Base

Dor-o-matic cylinder bushing. Fits around the Pinion gear to take up slack and reduce friction.

Doromatic Part # BUSH.102

Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown

The 1/4 HP Single Phase Gear Motor by Irwin is also known as Part # P6000IR.

The Irwin 1/4 HP Single Phase Gear Motor features ¼ horsepower, 115 volts, and 4 amps. It operates at a speed of 12 RPM, which is ideal for the controlled movement required in bleacher systems. This slow and steady pace ensures that the bleachers can be deployed and retracted safely, minimizing the risk of accidents or damage.

One of the standout features of the Irwin 1/4 HP Single Phase Gear Motor is its robust construction. Built to withstand frequent use, the Irwin 1/4 HP Single Phase Gear Motor is made from high-quality materials that enhance its longevity. This means less downtime for maintenance and repairs, allowing facilities to focus on their events rather than equipment issues.

Installation is simple, thanks to the Irwin 1/4 HP Single Phase Gear Motor's user-friendly design. It can be easily integrated into existing bleacher systems, making it a convenient choice for upgrades or replacements. Additionally, the Irwin 1/4 HP Single Phase Gear Motor's compact size allows it to fit into tight spaces without compromising performance.

The 1/4 HP Single Phase Gear Motor by Irwin is a fantastic choice for anyone looking to enhance their bleacher systems. With its reliable performance and durable construction, the Irwin 1/4 HP Single Phase Gear Motor stands out as a top option for schools, gyms, and auditoriums alike. Whether you are setting up for a sports event, a concert, or a community gathering, the 1/4 HP Single Phase Gear Motor by Irwin ensures that your bleachers will function smoothly and safely.

Lastly, remember that investing in quality parts—such as the Irwin 1/4 HP Single Phase Gear Motor—can significantly enhance the performance of your bleachers. The Irwin 1/4 HP Single Phase Gear Motor motor is designed for durability and efficiency, ensuring that your bleachers operate smoothly for years to come.

For any questions or assistance with your purchase of the 1/4 HP Single Phase Gear Motor by Irwin, don’t hesitate to reach out. We are here to help you make certain that your bleachers remain a safe and welcoming space for everyone.

The 3/4" Q-Ball Floor Protector with Felt Base is for use on 3/4" outside diameter chair and table legs. The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic. Kit includes: Adaptor for 3/4" Leg, and Q-Ball with Felt Base

Bleacher Bolt Fastener Kep Nut 5/16-18.

Bleacher Bolt Fastener Kep Nut 5/16-24.

The Ives Wall Bumper Stop WS407-CCV our economically price wall bumper.  The metal ring is a wrought stainless steel, otherwise known as stamping.  It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time.   Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten.  The bumper is 2-1/2" in diameter and projects out 1".

Nylon based Metal Swivel Glide for a round chair leg with a 1-1/8" O.D. X 1" I.D. This glide does not have a ferrule. This glides base is 1 1/4" in diameter. Metal Furniture Feet for school and institution applications. Nylon base protects your floor as long as the bottom does not have grit and grime on it. 

The Ives Wall Bumper Stop WS407-CVX our economically price wall bumper.  The metal ring is a wrought stainless steel, otherwise known as stamping.  It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time.   Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten.  The bumper is 2-1/2" in diameter and projects out 1".

Yale 4400 Door Closer

• Non-handed
• Rack-and-pinion design
• Cast aluminum body
• 2-1/8" (54mm) projection
• 1-1/2" (38mm) diameter piston
• 5/8" (16mm) diameter pinion journals
• Staked valves
• Standard, separate and independent, latch, sweep and
  backcheck intensity valves
• Backcheck positioning valve
• NorGlide® fluid
• Molded plastic cover
• All standard arm applications allow doors to swing 180°,
  conditions permitting
• Self-drilling screws
• Full-size template
• 10-year limited warranty

2-3/8" x 6-3/4" hole spacing. This door closer replaces the 4400BF. This newer version is Barrier Free Compliant.

Adams Rite 8700 / 8800 Mounting Base Kit

Replacement active head for the Adams Rite 8800 and Adams Rite 8700 Star Wheel Latching System.   Kit includes replacement rivets to reattach.

Adams Rite Part # 91-8800

Toilet Partition two ear pilaster bracket kit for 1-1/4" thick material. This brackets base is 1-1/2″ wide x 4″ long with 3″ center to center hole spacing and comes out from the wall 2-1/2". The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. Brackets are Included with security screws for installation. Also known as 615220.

Ives Dome Door Stop 1-3/8" FS438

Features:

• For doors with threshold or undercut doors.
• Heavy-Duty Cast Dome Stops constructed of brass, bronze or aluminum.
• Gray, non-marring rubber bumper.

Overall hgt 1-3/8"
Base Hgt 9/16"
Base Diameter 1-3/4" x 2" Oval

Bleacher Bolt Fastener Type L, 5/16-24 x 2" Long.

Snapglides-Deep Cup caps to fit over 1 1/4" diameter glides. White in color. Attach to your glides to protect your floors from being scratched. Also reduces noise when students move their chairs around. 

Toilet Partition One Ear Wall Bracket For 1" Panel Cast Stainless Steel

Cast stainless steel construction. Base of the bracket is 2" x 1-1/2", with 1-1/2" hole spacing. Bracket legs project out 2-1/2" with the screws at 2-1/8" on center from the base. The four holes are 1/4" diameter. Also known as a Bathroom Stall One Ear Wall Bracket or One Ear 1". Manufacture part # 1763.

Shipped with mounting screws.

Ives Dome Door Stop 1" Height FS436

Features:

• For doors without threshold.
• Heavy-Duty Cast Dome Stops constructed of brass, bronze or aluminum.
• Gray, non-marring rubber bumper.

Overall hgt 1"
Base Hgt 3/16"
Base Diameter 1-3/4" x 2" Oval

1-1/4" Tube Cap

Round Tubing - 6 prong Tube Caps are pushed in easily and hold securely in 16 or 18 gauge round tubing. Sold individually.

Fits 1-1/4" outside diamter legs, 1-1/4" base diamter

Nickel Base Finish

Toilet Partition One Ear Wall Bracket For 1" Panel,Stamped Stainless Steel

14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 2-13/32" with the mounting screws are 1-15/32" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and One Wing Bracket. Manufacturer part # 1769.

Shipped with screws

Toilet Partition Two Ear Wall Bracket For 1" Thick Panel Stamped Stainless Steel

14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 3-11/16" with the mounting screws are 2-15/16" on center. Leg project out 2-1/2" with the thru hole at 2-1/8" from the base. Also known as a Bathroom Stall Wall Bracket and Two Wing Bracket. Manufacturer part # 1759.

Shipped with screws

Cast SS Two Ear Bracket 1" Panel 1-1/2" X 2-1/2"

Cast stainless steel construction. Base is 1-1/2" x 4" with 3" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall Two Ear Wall Bracket, or Two Ear 1". Manufacture part # 1753

Shipped with mounting screws.